-- G3-AVAYA-MIB Version 5.1.1 -- -- Copyright (C) 2006, 2007 by Avaya Inc. All rights reserved. -- -- Contact: Avaya Customer Services -- -- Postal: Avaya, Inc. -- 211 Mt Airy Rd. -- Basking Ridge, NJ 07920 -- USA -- -- Tel: +1 908 953 6000 -- -- WWW: http://www.avaya.com -- G3-AVAYA-MIB DEFINITIONS ::= BEGIN IMPORTS OBJECT-TYPE, DisplayString FROM RFC1213-MIB OBJECT-TYPE, NetworkAddress, IpAddress, Counter, Gauge, TimeTicks FROM RFC1155-SMI; -- The following may be defined elsewhere. If problems occur when trying -- to load this MIB, some of the lines below may need to be commented -- out if another MIB has already been loaded that defines these points -- in the enterprise MIB branch. Furthermore, if an Avaya enterprise -- specific MIB has already been loaded then the line defining the -- the Avaya MIB branch may also need to be commented out (possibly -- along with the lines defining the mibs and products sub-branches -- underneath avaya). iso OBJECT IDENTIFIER ::= { 1 } org OBJECT IDENTIFIER ::= { iso 3 } dod OBJECT IDENTIFIER ::= { org 6 } internet OBJECT IDENTIFIER ::= { dod 1 } private OBJECT IDENTIFIER ::= { internet 4 } enterprises OBJECT IDENTIFIER ::= { private 1 } avaya OBJECT IDENTIFIER ::= { enterprises 6889 } mibs OBJECT IDENTIFIER ::= { avaya 2 } definity OBJECT IDENTIFIER ::= { mibs 8 } g3-mib OBJECT IDENTIFIER ::= { definity 1 } g3proxmib OBJECT IDENTIFIER ::= { definity 2 } products OBJECT IDENTIFIER ::= { avaya 1 } def-products OBJECT IDENTIFIER ::= { products 8 } g3-products OBJECT IDENTIFIER ::= { def-products 1 } -- product identifiers for proxy agent, switches, and boards definity-proxy OBJECT IDENTIFIER ::= { g3-products 40 } definity-g3 OBJECT IDENTIFIER ::= { g3-products 41 } definity-ecs OBJECT IDENTIFIER ::= { g3-products 42 } definity-mcu OBJECT IDENTIFIER ::= { g3-products 43 } val-board OBJECT IDENTIFIER ::= { g3-products 45 } clan-board OBJECT IDENTIFIER ::= { g3-products 46 } definity-one OBJECT IDENTIFIER ::= { g3-products 47 } definity-ip600 OBJECT IDENTIFIER ::= { g3-products 48 } avaya-s8700m OBJECT IDENTIFIER ::= { g3-products 49 } avaya-s8300 OBJECT IDENTIFIER ::= { g3-products 50 } avaya-s8700i OBJECT IDENTIFIER ::= { g3-products 51 } avaya-s8500 OBJECT IDENTIFIER ::= { g3-products 52 } crossfire-board OBJECT IDENTIFIER ::= { g3-products 53 } blade-server OBJECT IDENTIFIER ::= { g3-products 55 } avaya-s8400 OBJECT IDENTIFIER ::= { g3-products 56 } cm-on-xen OBJECT IDENTIFIER ::= { g3-products 57 } -- object groups for G3 Proxy MIB g3client OBJECT IDENTIFIER ::= { g3proxmib 1 } g3agent OBJECT IDENTIFIER ::= { g3proxmib 2 } g3trap OBJECT IDENTIFIER ::= { g3proxmib 3 } g3filter OBJECT IDENTIFIER ::= { g3proxmib 4 } g3maintobj OBJECT IDENTIFIER ::= { g3proxmib 5 } g3category OBJECT IDENTIFIER ::= { g3proxmib 6 } g3platsrc OBJECT IDENTIFIER ::= { g3proxmib 7 } g3platfilt OBJECT IDENTIFIER ::= { g3proxmib 8 } g3rstfilt OBJECT IDENTIFIER ::= { g3proxmib 9 } -- object groups for G3 MIB g3connect OBJECT IDENTIFIER ::= { g3-mib 1 } g3vintage OBJECT IDENTIFIER ::= { g3-mib 2 } g3config OBJECT IDENTIFIER ::= { g3-mib 3 } g3alarms OBJECT IDENTIFIER ::= { g3-mib 4 } g3errors OBJECT IDENTIFIER ::= { g3-mib 5 } g3health OBJECT IDENTIFIER ::= { g3-mib 6 } g3cabinet OBJECT IDENTIFIER ::= { g3-mib 7 } g3cabtype OBJECT IDENTIFIER ::= { g3-mib 8 } g3cartype OBJECT IDENTIFIER ::= { g3-mib 9 } g3port OBJECT IDENTIFIER ::= { g3-mib 10 } g3station OBJECT IDENTIFIER ::= { g3-mib 11 } g3statsta OBJECT IDENTIFIER ::= { g3-mib 12 } g3trunkmem OBJECT IDENTIFIER ::= { g3-mib 13 } g3trunksta OBJECT IDENTIFIER ::= { g3-mib 14 } g3datamod OBJECT IDENTIFIER ::= { g3-mib 15 } g3datamsta OBJECT IDENTIFIER ::= { g3-mib 16 } g3timedate OBJECT IDENTIFIER ::= { g3-mib 18 } g3busytrk OBJECT IDENTIFIER ::= { g3-mib 19 } g3busybrd OBJECT IDENTIFIER ::= { g3-mib 20 } g3servalm OBJECT IDENTIFIER ::= { g3-mib 21 } g3msgalm OBJECT IDENTIFIER ::= { g3-mib 22 } g3ipevt OBJECT IDENTIFIER ::= { g3-mib 23 } g3platcmds OBJECT IDENTIFIER ::= { g3-mib 24 } g3version OBJECT IDENTIFIER ::= { g3-mib 25 } g3update OBJECT IDENTIFIER ::= { g3-mib 26 } g3partition OBJECT IDENTIFIER ::= { g3-mib 27 } g3ds1cfg OBJECT IDENTIFIER ::= { g3-mib 30 } g3extdev OBJECT IDENTIFIER ::= { g3-mib 31 } g3trunkgrp OBJECT IDENTIFIER ::= { g3-mib 32 } g3bulletin OBJECT IDENTIFIER ::= { g3-mib 33 } g3ds1 OBJECT IDENTIFIER ::= { g3-mib 34 } g3atmpnc OBJECT IDENTIFIER ::= { g3-mib 35 } g3pnchealth OBJECT IDENTIFIER ::= { g3-mib 36 } g3siggroup OBJECT IDENTIFIER ::= { g3-mib 37 } g3restart OBJECT IDENTIFIER ::= { g3-mib 38 } g3fiberlink OBJECT IDENTIFIER ::= { g3-mib 39 } g3routepattern OBJECT IDENTIFIER ::= { g3-mib 40 } g3trunkcfg OBJECT IDENTIFIER ::= { g3-mib 41 } g3stationcfg OBJECT IDENTIFIER ::= { g3-mib 42 } g3atmcfg OBJECT IDENTIFIER ::= { g3-mib 43 } g3aca OBJECT IDENTIFIER ::= { g3-mib 44 } g3atmtrunk OBJECT IDENTIFIER ::= { g3-mib 45 } g3atmportpg1 OBJECT IDENTIFIER ::= { g3-mib 46 } g3atmportpg2 OBJECT IDENTIFIER ::= { g3-mib 47 } g3atmportpg3 OBJECT IDENTIFIER ::= { g3-mib 48 } g3dmodule OBJECT IDENTIFIER ::= { g3-mib 49 } g3occsum OBJECT IDENTIFIER ::= { g3-mib 50 } g3attdgrp OBJECT IDENTIFIER ::= { g3-mib 51 } g3attdpos OBJECT IDENTIFIER ::= { g3-mib 52 } g3trunksum OBJECT IDENTIFIER ::= { g3-mib 53 } g3pktrunksum OBJECT IDENTIFIER ::= { g3-mib 54 } g3trunkwbsum OBJECT IDENTIFIER ::= { g3-mib 55 } g3pktrunkwbsum OBJECT IDENTIFIER ::= { g3-mib 56 } g3pktrunkout OBJECT IDENTIFIER ::= { g3-mib 57 } g3pktrunklight OBJECT IDENTIFIER ::= { g3-mib 58 } g3pnblock OBJECT IDENTIFIER ::= { g3-mib 59 } g3pkpnblock OBJECT IDENTIFIER ::= { g3-mib 60 } g3snblock OBJECT IDENTIFIER ::= { g3-mib 61 } g3pksnblock OBJECT IDENTIFIER ::= { g3-mib 62 } g3hunt OBJECT IDENTIFIER ::= { g3-mib 63 } g3pkhunt OBJECT IDENTIFIER ::= { g3-mib 64 } g3huntlist OBJECT IDENTIFIER ::= { g3-mib 65 } g3tonerec OBJECT IDENTIFIER ::= { g3-mib 66 } g3pktonerec OBJECT IDENTIFIER ::= { g3-mib 67 } g3tonerecsum OBJECT IDENTIFIER ::= { g3-mib 68 } g3pktonerecsum OBJECT IDENTIFIER ::= { g3-mib 69 } g3rpatcfg OBJECT IDENTIFIER ::= { g3-mib 70 } g3rpat OBJECT IDENTIFIER ::= { g3-mib 71 } g3pkrpat OBJECT IDENTIFIER ::= { g3-mib 72 } g3secviolate OBJECT IDENTIFIER ::= { g3-mib 73 } g3cbctrunk OBJECT IDENTIFIER ::= { g3-mib 74 } g3deftime OBJECT IDENTIFIER ::= { g3-mib 75 } g3trunkout OBJECT IDENTIFIER ::= { g3-mib 76 } g3trunklight OBJECT IDENTIFIER ::= { g3-mib 77 } g3loadtotal OBJECT IDENTIFIER ::= { g3-mib 78 } g3loadint OBJECT IDENTIFIER ::= { g3-mib 79 } g3loadinc OBJECT IDENTIFIER ::= { g3-mib 80 } g3loadout OBJECT IDENTIFIER ::= { g3-mib 81 } g3loadtan OBJECT IDENTIFIER ::= { g3-mib 82 } g3pkloadtotal OBJECT IDENTIFIER ::= { g3-mib 83 } g3pkloadint OBJECT IDENTIFIER ::= { g3-mib 84 } g3pkloadinc OBJECT IDENTIFIER ::= { g3-mib 85 } g3pkloadout OBJECT IDENTIFIER ::= { g3-mib 86 } g3pkloadtan OBJECT IDENTIFIER ::= { g3-mib 87 } g3atmlatency OBJECT IDENTIFIER ::= { g3-mib 88 } g3pkatmlatency OBJECT IDENTIFIER ::= { g3-mib 89 } g3ipcodecsum OBJECT IDENTIFIER ::= { g3-mib 90 } g3pkipcodecsum OBJECT IDENTIFIER ::= { g3-mib 91 } g3ipregion OBJECT IDENTIFIER ::= { g3-mib 92 } g3ipdspsum OBJECT IDENTIFIER ::= { g3-mib 93 } g3pkipdspsum OBJECT IDENTIFIER ::= { g3-mib 94 } g3ipsignal OBJECT IDENTIFIER ::= { g3-mib 95 } g3pkipsignal OBJECT IDENTIFIER ::= { g3-mib 96 } g3annall OBJECT IDENTIFIER ::= { g3-mib 97 } g3pkannall OBJECT IDENTIFIER ::= { g3-mib 98 } g3anninteg OBJECT IDENTIFIER ::= { g3-mib 99 } g3pkanninteg OBJECT IDENTIFIER ::= { g3-mib 100 } g3nodename OBJECT IDENTIFIER ::= { g3-mib 101 } g3trkgrpmem OBJECT IDENTIFIER ::= { g3-mib 102 } g3ipinterface OBJECT IDENTIFIER ::= { g3-mib 103 } g3gateway OBJECT IDENTIFIER ::= { g3-mib 104 } g3mediacfg OBJECT IDENTIFIER ::= { g3-mib 105 } g3stamedia OBJECT IDENTIFIER ::= { g3-mib 106 } g3stamgann OBJECT IDENTIFIER ::= { g3-mib 107 } g3ipserver OBJECT IDENTIFIER ::= { g3-mib 108 } g3regipstat OBJECT IDENTIFIER ::= { g3-mib 109 } g3callratedata OBJECT IDENTIFIER ::= { g3-mib 110 } g3callratevoice OBJECT IDENTIFIER ::= { g3-mib 111 } g3callratesrv OBJECT IDENTIFIER ::= { g3-mib 112 } g3callratemedia OBJECT IDENTIFIER ::= { g3-mib 113 } g3callratetotal OBJECT IDENTIFIER ::= { g3-mib 114 } g3clansocsum OBJECT IDENTIFIER ::= { g3-mib 115 } g3pkclansocsum OBJECT IDENTIFIER ::= { g3-mib 116 } g3clanether OBJECT IDENTIFIER ::= { g3-mib 117 } g3clanppp OBJECT IDENTIFIER ::= { g3-mib 118 } g3mmisum OBJECT IDENTIFIER ::= { g3-mib 119 } g3pkmmisum OBJECT IDENTIFIER ::= { g3-mib 120 } g3esmsum OBJECT IDENTIFIER ::= { g3-mib 121 } g3pkesmsum OBJECT IDENTIFIER ::= { g3-mib 122 } g3voicesum OBJECT IDENTIFIER ::= { g3-mib 123 } g3pkvoicesum OBJECT IDENTIFIER ::= { g3-mib 124 } g3ipintlist OBJECT IDENTIFIER ::= { g3-mib 125 } g3stamedlist OBJECT IDENTIFIER ::= { g3-mib 126 } g3lsplist OBJECT IDENTIFIER ::= { g3-mib 127 } g3eventhour OBJECT IDENTIFIER ::= { g3-mib 128 } g3eventday OBJECT IDENTIFIER ::= { g3-mib 129 } g3statregion OBJECT IDENTIFIER ::= { g3-mib 130 } g3ipnetregion OBJECT IDENTIFIER ::= { g3-mib 131 } g3statmedpro OBJECT IDENTIFIER ::= { g3-mib 132 } g3ipunreg OBJECT IDENTIFIER ::= { g3-mib 133 } g3commlink OBJECT IDENTIFIER ::= { g3-mib 134 } g3statlink OBJECT IDENTIFIER ::= { g3-mib 135 } g3covpath OBJECT IDENTIFIER ::= { g3-mib 136 } g3pkcovpath OBJECT IDENTIFIER ::= { g3-mib 137 } g3principal OBJECT IDENTIFIER ::= { g3-mib 138 } g3pkprincipal OBJECT IDENTIFIER ::= { g3-mib 139 } g3esmain OBJECT IDENTIFIER ::= { g3-mib 140 } g3esservers OBJECT IDENTIFIER ::= { g3-mib 141 } g3esparms OBJECT IDENTIFIER ::= { g3-mib 142 } g3mgrecrule OBJECT IDENTIFIER ::= { g3-mib 143 } g3commproc OBJECT IDENTIFIER ::= { g3-mib 144 } g3intvl OBJECT IDENTIFIER ::= { g3-mib 145 } g3busyrls OBJECT IDENTIFIER ::= { g3-mib 250 } -- the connect group g3connectState OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following off(2), -- connection is disabled down(3), -- connection is down init(4), -- connection is initializing up(5), -- connection is up idle(6) -- connection is idle } ACCESS read-write STATUS mandatory DESCRIPTION "The current state of the switch connection; this object cat be set to 'off' to disable the connection and can be set to 'init' to re-initialize the connection. It can also be set to 'idle', if the g3connectType is 'dynamic', to put turn off the connection until a request is received." ::= { g3connect 1 } g3connectTimeUp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The elapsed time since the connection was established" ::= { g3connect 2 } g3connectTimeUnused OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The elapsed time since the connection was last used" ::= { g3connect 3 } g3connectAttempts OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of connection attempts" ::= { g3connect 4 } g3connectSuccess OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of successful connections" ::= { g3connect 5 } g3connectRequests OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switch data requests" ::= { g3connect 6 } g3connectResponses OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switch data responses" ::= { g3connect 7 } g3connectErrors OBJECT-TYPE SYNTAX Counter ACCESS read-only STATUS mandatory DESCRIPTION "The number of switch connection errors" ::= { g3connect 8 } g3connectQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number switch requests in the input queue" ::= { g3connect 9 } g3connectDelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The expected delay in retrieving switch data" ::= { g3connect 10 } g3connectAlarmForward OBJECT-TYPE SYNTAX INTEGER { other(1), -- none of the following ok(2), -- all alarms have been forwarded failed(3) -- alarm forwarding failure has occured } ACCESS read-write STATUS mandatory DESCRIPTION "This object serves as a flag to indicate if a failure has occured in forwarding alarms received from the switch on to another destination." ::= { g3connect 11 } g3connectTimeReset OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The elapsed time since the connection counters were last reset. Setting this object to zero will reset the counters." ::= { g3connect 12 } g3connectType OBJECT-TYPE SYNTAX INTEGER { static(1), -- connection type is static dynamic(2) -- connection type is dynamic } ACCESS read-only STATUS mandatory DESCRIPTION "The type of the switch connection; it is either 'static' which will stay up continuously or 'dynamic' which will be dropped after the connection is idle for a period of time." ::= { g3connect 13 } g3connectTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of idle minutes a 'dynamic' connection will stay connected before being dropped. For a 'static' connection this field is not applicable an contains a value of zero" ::= { g3connect 14 } -- the g3vintage group g3vintageTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the vintage data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3vintageTintvl object allows the Network Manager to determine the validity of the vintage data in the cache and to control when the proxy agent extracts the vintage data from the switch." ::= { g3vintage 1 } g3vintageTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the vintage data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for vintage objects is received by the agent it uses the g3vintageTage and g3vintageTintvl objects to determine whether it should refresh the cached vintage data. If g3vintageTstmp + g3vintageTintvl is less than the current value of the sysUpTime object then the agent refreshes the vintage data cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3vintage 2 } g3vintageTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3vintage 3 } g3vintageTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3vintage 4 } g3vintageSpeArelease OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the release number for SPE A." ::= { g3vintage 5 } g3vintageSpeBrelease OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the release number for SPE B." ::= { g3vintage 6 } g3vintageCurMemory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the current memory configuration." ::= { g3vintage 7 } g3vintageSpeAupID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the update identifier for SPE A." ::= { g3vintage 8 } g3vintageSpeBupID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the update identifier for SPE B." ::= { g3vintage 9 } g3vintageSpeAupState1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..26)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the first part of the update state for SPE A." ::= { g3vintage 10 } g3vintageSpeBupState1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..26)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the first part of the update state for SPE B." ::= { g3vintage 11 } g3vintageSpeAupState2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the second part of the update state for SPE A." ::= { g3vintage 12 } g3vintageSpeBupState2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the second part of the update state for SPE B." ::= { g3vintage 13 } g3vintageVSPacketBus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the a flag indicating whether packet bus is available on a G3vs system." ::= { g3vintage 14 } g3vintageOfferCategory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the current Offer Category ('A', 'B', or '?')." ::= { g3vintage 15 } g3vintageATMPnc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the current ATM PNC Customer Option ('y', or 'n')." ::= { g3vintage 16 } g3vintageProductID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the Product Identification number for the Definity switch." ::= { g3vintage 17 } g3vintageOSSNumber1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the first OSS telephone number." ::= { g3vintage 18 } g3vintageAbbAlmRep1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the Abbreviated Alarm Report for the first OSS Number ('y' or 'n')." ::= { g3vintage 19 } g3vintageOSSNumber2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the second OSS telephone number." ::= { g3vintage 20 } g3vintageAbbAlmRep2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the Abbreviated Alarm Report for the second OSS Number ('y' or 'n')." ::= { g3vintage 21 } g3vintageAOActivate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains Alarm Origination Activation status ('y' or 'n')." ::= { g3vintage 22 } g3vintageCANotify OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains Cleared Alarm Notification status ('y' or 'n')." ::= { g3vintage 23 } g3vintageResNotify OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains Restart Notification status ('y' or 'n')." ::= { g3vintage 24 } g3vintagePbxID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the Local Node Number for pre R11" ::= { g3vintage 25 } g3vintageACAFlag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the current ACA Enabled Option ('y', or 'n')." ::= { g3vintage 26 } g3vintageIPAddress1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the first octet of IP address" ::= { g3vintage 27 } g3vintageIPAddress2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the second octet of IP address" ::= { g3vintage 28 } g3vintageIPAddress3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the third octet of IP address" ::= { g3vintage 29 } g3vintageIPAddress4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the fourth octet of IP address" ::= { g3vintage 30 } g3vintagePortNetSupport OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains" ::= { g3vintage 31 } g3vintageLocalSpareProc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains" ::= { g3vintage 32 } g3vintagePlatform OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains" ::= { g3vintage 33 } g3vintageLocalNodeNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the Local Node Number on R11 and beyond" ::= { g3vintage 34 } g3vintageIPStaReg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the number of current registered IP stations on the media server." ::= { g3vintage 35 } g3vintageIPStaAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the number of concurrent IP stations still available on the media server." ::= { g3vintage 36 } g3vintageIPStaLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the total system limit of concurrent IP stations on the media server." ::= { g3vintage 37 } g3vintageIPAttdReg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the number of current registered IP attendant consoles on the media server." ::= { g3vintage 38 } g3vintageIPAttdAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the number of concurrent IP attendant consoles still available on the media server." ::= { g3vintage 39 } g3vintageIPAttdLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the total system limit of concurrent IP attendant consoles on the media server." ::= { g3vintage 40 } g3vintageRemoteOffReg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the number of current registered remote office stations on the media server." ::= { g3vintage 41 } g3vintageRemoteOffAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the number of concurrent remote office stations still available on the media server." ::= { g3vintage 42 } g3vintageRemoteOffLimit OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object that contains the total system limit of concurrent remote office stations on the media server." ::= { g3vintage 43 } -- the g3config group g3configTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the configuration data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3configTintvl object allows the Network Manager to determine the validity of the configuration data in the cache and to control when the proxy agent extracts the configuration data from the switch." ::= { g3config 1 } g3configTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the configuration data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for configuration objects is received by the agent it uses the g3configTage and g3configTintvl objects to determine whether it should refresh the cached configTable. If g3configTstmp + g3configTintvl is less than the current value of the sysUpTime object then the agent refreshes the configTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3config 2 } g3configTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3config 3 } g3configTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3config 4 } g3configTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3config 5 } g3configTable OBJECT-TYPE SYNTAX SEQUENCE OF G3configEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3config entries." ::= { g3config 6 } g3configEntry OBJECT-TYPE SYNTAX G3configEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3config entry containing objects of the g3config information sent by the switch." INDEX { g3configBoardNum, g3configIndex } ::= { g3configTable 1 } G3configEntry ::= SEQUENCE { g3configBoardNum DisplayString, g3configIndex INTEGER, g3configBoardType DisplayString, g3configCode DisplayString, g3configSuffix DisplayString, g3configVintage DisplayString, g3configPort1 DisplayString, g3configPort2 DisplayString, g3configPort3 DisplayString, g3configPort4 DisplayString, g3configPort5 DisplayString, g3configPort6 DisplayString, g3configPort7 DisplayString, g3configPort8 DisplayString, g3configPort9 DisplayString, g3configPort10 DisplayString, g3configPort11 DisplayString, g3configPort12 DisplayString, g3configPort13 DisplayString, g3configPort14 DisplayString, g3configPort15 DisplayString, g3configPort16 DisplayString, g3configPort17 DisplayString, g3configPort18 DisplayString, g3configPort19 DisplayString, g3configPort20 DisplayString, g3configPort21 DisplayString, g3configPort22 DisplayString, g3configPort23 DisplayString, g3configPort24 DisplayString, g3configPort25 DisplayString, g3configPort26 DisplayString, g3configPort27 DisplayString, g3configPort28 DisplayString, g3configPort29 DisplayString, g3configPort30 DisplayString, g3configPort31 DisplayString, g3configPort32 DisplayString } g3configBoardNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3configEntry 1 } g3configIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the config entry for the board specified in BoardNum. This object along with BoardNum will serve as the instance identifier for boardEntry." ::= { g3configEntry 2 } g3configBoardType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains a text description of the type of board." ::= { g3configEntry 3 } g3configCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the code that defines the type of board." ::= { g3configEntry 4 } g3configSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the suffix to the code (object configCode) that defines the type of board." ::= { g3configEntry 5 } g3configVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the vintage of the board." ::= { g3configEntry 6 } g3configPort1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that specifies the assignment of the port. A string representing an integer identical to the port number indicates that the port is assigned. The string (u) indicates that the port is unassigned. The string (t) indicates that the port is assigned via the TTI feature. A null string indicates that the port does not exist on that board." ::= { g3configEntry 7 } g3configPort2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 8 } g3configPort3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 9 } g3configPort4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 10 } g3configPort5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 11 } g3configPort6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 12 } g3configPort7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 13 } g3configPort8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 14 } g3configPort9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 15 } g3configPort10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 16 } g3configPort11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 17 } g3configPort12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 18 } g3configPort13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 19 } g3configPort14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 20 } g3configPort15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 21 } g3configPort16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 22 } g3configPort17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 23 } g3configPort18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 24 } g3configPort19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 25 } g3configPort20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 26 } g3configPort21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 27 } g3configPort22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 28 } g3configPort23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 29 } g3configPort24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 30 } g3configPort25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 31 } g3configPort26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 32 } g3configPort27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 33 } g3configPort28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 34 } g3configPort29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 35 } g3configPort30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 36 } g3configPort31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 37 } g3configPort32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of configPort1." ::= { g3configEntry 38 } -- the g3alarms group g3alarmsTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the alarm data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3alarmsTintvl object allows the Network Manager to determine the validity of the alarm data in the cache and to control when the proxy agent extracts the alarm data from the switch." ::= { g3alarms 1 } g3alarmsTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the alarm data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for alarm objects is received by the agent it uses the g3alarmsTage and g3alarmsTintvl objects to determine whether it should refresh the cached alarmsTable. If g3alarmsTstmp + g3alarmsTintvl is less than the current value of the sysUpTime object then the agent refreshes the alarmsTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3alarms 2 } g3alarmsTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3alarms 3 } g3alarmsTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3alarms 4 } g3alarmsTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3alarms 5 } g3alarmsTable OBJECT-TYPE SYNTAX SEQUENCE OF G3alarmsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3alarms entries." ::= { g3alarms 6 } g3alarmsEntry OBJECT-TYPE SYNTAX G3alarmsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3alarms entry containing objects of the g3alarms information sent by the switch." INDEX { g3alarmsPort, g3alarmsIndex } ::= { g3alarmsTable 1 } G3alarmsEntry ::= SEQUENCE { g3alarmsPort DisplayString, g3alarmsIndex INTEGER, g3alarmsMaintName DisplayString, g3alarmsOnBrd DisplayString, g3alarmsAltName DisplayString, g3alarmsAlarmType DisplayString, g3alarmsSvcState DisplayString, g3alarmsAck DisplayString, g3alarmsMonthAlrmd DisplayString, g3alarmsDayAlrmd DisplayString, g3alarmsHourAlrmd DisplayString, g3alarmsMinAlrmd DisplayString, g3alarmsMonthRslvd DisplayString, g3alarmsDayRslvd DisplayString, g3alarmsHourRslvd DisplayString, g3alarmsMinRslvd DisplayString, g3alarmsAlarmNumber DisplayString, g3alarmsProductID DisplayString, g3alarmsAck2 DisplayString, g3alarmsSrcIPAddr DisplayString, g3alarmsSrcMACAddr DisplayString, g3alarmsDestIPAddr DisplayString, g3alarmsDestPort DisplayString, g3alarmsProtocol DisplayString, g3alarmsCount DisplayString, g3alarmsIPAddress DisplayString, g3alarmsCategory DisplayString, g3alarmsErrorCodes DisplayString, g3alarmsViolationType DisplayString, g3alarmsCode DisplayString, g3alarmsData DisplayString, g3alarmsICMPType DisplayString, g3alarmsEventID DisplayString, g3alarmsStatus DisplayString } g3alarmsPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1024)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32). This object along with alIndex will serve as the instance identifier for alarmsEntry." ::= { g3alarmsEntry 1 } g3alarmsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the alarm entry for the port specified in alarmsPort. This object along with alarmsPort will serve as the instance identifier for alarmsEntry." ::= { g3alarmsEntry 2 } g3alarmsMaintName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Maintenance Object Name." ::= { g3alarmsEntry 3 } g3alarmsOnBrd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object specifying whether or not the alarm indicates an on board fault." ::= { g3alarmsEntry 4 } g3alarmsAltName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alternate name of the alarmed object. Alternate names can consist of extension numbers, trunk group numbers or other identifying data." ::= { g3alarmsEntry 5 } g3alarmsAlarmType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object specifying the alarm type (or severity)." ::= { g3alarmsEntry 6 } g3alarmsSvcState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object specifying the service state of the alarmed object. Service States can be IN or OUT {any others?}." ::= { g3alarmsEntry 7 } g3alarmsAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object indicating whether or not the alarm has been acknowledged by the alarm receiver." ::= { g3alarmsEntry 8 } g3alarmsMonthAlrmd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the month the alarm was created." ::= { g3alarmsEntry 9 } g3alarmsDayAlrmd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the day the alarm was created." ::= { g3alarmsEntry 10 } g3alarmsHourAlrmd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the hour the alarm was created." ::= { g3alarmsEntry 11 } g3alarmsMinAlrmd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the minute the alarm was created." ::= { g3alarmsEntry 12 } g3alarmsMonthRslvd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the month the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness." ::= { g3alarmsEntry 13 } g3alarmsDayRslvd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the day the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness." ::= { g3alarmsEntry 14 } g3alarmsHourRslvd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the hour the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness." ::= { g3alarmsEntry 15 } g3alarmsMinRslvd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the minute the alarm was resolved. This object will always contain the value (00) because this table only contains open alarms. This object is included in the table for future enhancements and for completeness." ::= { g3alarmsEntry 16 } g3alarmsAlarmNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Alarm Number of the alarm. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field. For traps supported by this MIB, it is populated with a unique alarm identifier of the form FPA::: : : :. The filter number field either contains the alarm filter number associated with the trap being generated or '00000' if a filter number is not applicable. The time resolved fields are populated with '0000000000', if the alarm has not been resolved. For some alarms the alternate name may not contain any information. The new/mod flag either contains an 'N' for a new alarm or a 'M' for a modified alarm. The above field format only applies to CM 3.1 and greater releases." ::= { g3alarmsEntry 17 } g3alarmsProductID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Product ID of the alarm. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 18 } g3alarmsAck2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "Another DisplayString Object indicating whether or not the alarm has been acknowledged." ::= { g3alarmsEntry 19 } g3alarmsSrcIPAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the IP address that is the source of a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 20 } g3alarmsSrcMACAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the IP address that is the MAC address that is the source of a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 21 } g3alarmsDestIPAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the IP address that is the destination of a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 22 } g3alarmsDestPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the IP port that is the destination of a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 23 } g3alarmsProtocol OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the protocol that a security attack is utilizing. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 24 } g3alarmsCount OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the number of occurrences at the time that a trap was sent during a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 25 } g3alarmsIPAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the IP address of the server. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 26 } g3alarmsCategory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the the alarm category that the alarm belongs to. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 27 } g3alarmsErrorCodes OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a list of up to 16 error codes that could have caused the alarm. Not all of the error codes may be the actually cause. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 28 } g3alarmsViolationType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the violation type associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 29 } g3alarmsCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the code associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 30 } g3alarmsData OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the data field associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 31 } g3alarmsICMPType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the ICMP type associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 32 } g3alarmsEventID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the event ID associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 33 } g3alarmsStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status associated with a security attack. This is just a place holder for a field populated in alarm traps. Nothing is populated in this field." ::= { g3alarmsEntry 34 } -- the g3errors group g3errorsTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the error log was last extracted from the switch by the G3 Proxy Agent. This object along with the g3errorsTintvl object allows the Network Manager to determine the validity of the error log in the cache and to control when the proxy agent extracts the error log data from the switch." ::= { g3errors 1 } g3errorsTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the error data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for error objects is received by the agent it uses the g3errorsTage and g3errorsTintvl objects to determine whether it should refresh the cached errorsTable. If g3errorsTstmp + g3errorsTintvl is less than the current value of the sysUpTime object then the agent refreshes the errorsTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3errors 2 } g3errorsTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3errors 3 } g3errorsTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3errors 4 } g3errorsTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3errors 5 } g3errorsTable OBJECT-TYPE SYNTAX SEQUENCE OF G3errorsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3errors entries." ::= { g3errors 6 } g3errorsEntry OBJECT-TYPE SYNTAX G3errorsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3errors entry containing objects of the g3errors information sent by the switch." INDEX { g3errorsPort, g3errorsIndex } ::= { g3errorsTable 1 } G3errorsEntry ::= SEQUENCE { g3errorsPort DisplayString, g3errorsIndex INTEGER, g3errorsMaintName DisplayString, g3errorsAltName DisplayString, g3errorsErrType DisplayString, g3errorsAuxData DisplayString, g3errorsMonthFirst DisplayString, g3errorsDayFirst DisplayString, g3errorsHourFirst DisplayString, g3errorsMinFirst DisplayString, g3errorsMonthLast DisplayString, g3errorsDayLast DisplayString, g3errorsHourLast DisplayString, g3errorsMinLast DisplayString, g3errorsErrCnt DisplayString, g3errorsErrRt DisplayString, g3errorsRtperHr DisplayString, g3errorsAlSt DisplayString, g3errorsAck DisplayString } g3errorsPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32). This object along with errorsIndex will serve as the instance identifier for errorsEntry." ::= { g3errorsEntry 1 } g3errorsIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the error entry for the port specified in errorsPort. This object along with errorsPort will serve as the instance identifier for errorsEntry." ::= { g3errorsEntry 2 } g3errorsMaintName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Maintenance Object Name." ::= { g3errorsEntry 3 } g3errorsAltName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alternate name of the errored object. Alternate names can consist of extension numbers, trunk group numbers or other identifying data." ::= { g3errorsEntry 4 } g3errorsErrType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a specific error type numeric code used to determine the type of error." ::= { g3errorsEntry 5 } g3errorsAuxData OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing an auxiliary numeric code used with the errType to troubleshoot the problem." ::= { g3errorsEntry 6 } g3errorsMonthFirst OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the month that the error first occurred." ::= { g3errorsEntry 7 } g3errorsDayFirst OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the day that the error first occurred." ::= { g3errorsEntry 8 } g3errorsHourFirst OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the hour that the error first occurred." ::= { g3errorsEntry 9 } g3errorsMinFirst OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the minute that the error first occurred." ::= { g3errorsEntry 10 } g3errorsMonthLast OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the month that the error last occurred." ::= { g3errorsEntry 11 } g3errorsDayLast OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the day that the error last occurred." ::= { g3errorsEntry 12 } g3errorsHourLast OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the hour that the error last occurred." ::= { g3errorsEntry 13 } g3errorsMinLast OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the minute that the error last occurred." ::= { g3errorsEntry 14 } g3errorsErrCnt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a numeric count of the occurrences of the error." ::= { g3errorsEntry 15 } g3errorsErrRt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the error rate occurrences of the error." ::= { g3errorsEntry 16 } g3errorsRtperHr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the error rate per hour." ::= { g3errorsEntry 17 } g3errorsAlSt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alarm state of the error." ::= { g3errorsEntry 18 } g3errorsAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object indicating whether or not the alarm has been acknowledged by the alarm receiver." ::= { g3errorsEntry 19 } -- the g3health group g3healthTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the health data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3healthTintvl object allows the Network Manager to determine the validity of the health data in the cache and to control when the proxy agent extracts the health data from the switch." ::= { g3health 1 } g3healthTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the health data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for health objects is received by the agent it uses the g3healthTage and g3healthTintvl objects to determine whether it should refresh the cached healthTable. If g3healthTstmp + g3healthTintvl is less than the current value of the sysUpTime object then the agent refreshes the healthTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3health 2 } g3healthTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3health 3 } g3healthTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3health 4 } g3healthMajor OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged major alarms." ::= { g3health 5 } g3healthMinor OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged minor alarms." ::= { g3health 6 } g3healthWarning OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged warnings." ::= { g3health 7 } g3healthTrkBusy OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of trunks busied out." ::= { g3health 8 } g3healthStnBusy OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of stations busied out." ::= { g3health 9 } g3healthOthBusy OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of objects busied out except trunks and stations." ::= { g3health 10 } g3healthStaticOcc OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the proportion of the CPU which is currently dedicated to high priority items (e.g. the operating system). This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%)." ::= { g3health 11 } g3healthCallpOcc OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the proportion of the CPU which is currently dedicated to call processing. This occupancy has priority over SM and IDLE occupancy categories and if needed, will take processor time away from these occupancy categories. This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%)." ::= { g3health 12 } g3healthSysMgmtOcc OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the proportion of the CPU which is currently dedicated to system management or periodic and scheduled maintenance. Therefore, if there is a large amount of periodic or scheduled maintenance testing being performed, this occupancy percentage can be high without affecting service. This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%)." ::= { g3health 13 } g3healthIdleOcc OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the proportion of the CPU which is currently available for use. This percentage is rounded to the nearest integer, therefore a percentage of 0 means that the occupancy is less than one half of a percent (e.g. an occupancy of 89.6% would be displayed as 90%)." ::= { g3health 14 } g3healthActiveSPE OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the active SPE (A or B) followed by the interchange mode (auto or lock)." ::= { g3health 15 } g3healthActivePNC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the active PNC (A-PNC or B-PNC) followed by the interchange mode (auto or lock)." ::= { g3health 16 } g3healthDupSPE OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the duplication status of the SPE (y or n)." ::= { g3health 17 } g3healthDupPNC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the duplication status of the PNC (y or n)." ::= { g3health 18 } g3healthPower OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the power source for the SPE (commercial or backup)." ::= { g3health 19 } g3healthTimeSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the time source for the SPE (external, internal, primary, secondary, or local)." ::= { g3health 20 } g3healthLogins OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of active logins." ::= { g3health 21 } g3healthCab1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 1st cabinet." ::= { g3health 22 } g3healthCab2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 2nd cabinet." ::= { g3health 23 } g3healthCab3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 3rd cabinet." ::= { g3health 24 } g3healthCab4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 4th cabinet." ::= { g3health 25 } g3healthCab5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 5th cabinet." ::= { g3health 26 } g3healthCab6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 6th cabinet." ::= { g3health 27 } g3healthCab7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 7th cabinet." ::= { g3health 28 } g3healthCab8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 8th cabinet." ::= { g3health 29 } g3healthCab9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 9th cabinet." ::= { g3health 30 } g3healthCab10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 10th cabinet." ::= { g3health 31 } g3healthCab11 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 11th cabinet." ::= { g3health 32 } g3healthCab12 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 12th cabinet." ::= { g3health 33 } g3healthCab13 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 13th cabinet." ::= { g3health 34 } g3healthCab14 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 14th cabinet." ::= { g3health 35 } g3healthCab15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 15th cabinet." ::= { g3health 36 } g3healthPncStat1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 37 } g3healthPncStat2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 38 } g3healthPncStat3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 39 } g3healthPncStat4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 40 } g3healthPncStat5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 41 } g3healthPncStat6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 42 } g3healthPncStat7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 43 } g3healthPncStat8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 44 } g3healthPncStat9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 45 } g3healthPncStat10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 46 } g3healthPncStat11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 47 } g3healthPncStat12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 48 } g3healthPncStat13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 49 } g3healthPncStat14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 50 } g3healthPncStat15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 51 } g3healthCab16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 16th cabinet." ::= { g3health 52 } g3healthCab17 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 17th cabinet." ::= { g3health 53 } g3healthCab18 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 18th cabinet." ::= { g3health 54 } g3healthCab19 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 19th cabinet." ::= { g3health 55 } g3healthCab20 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 20th cabinet." ::= { g3health 56 } g3healthCab21 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 21st cabinet." ::= { g3health 57 } g3healthCab22 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 22nd cabinet." ::= { g3health 58 } g3healthCab23 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 23rd cabinet." ::= { g3health 59 } g3healthCab24 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 24th cabinet." ::= { g3health 60 } g3healthCab25 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 25th cabinet." ::= { g3health 61 } g3healthCab26 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 26th cabinet." ::= { g3health 62 } g3healthCab27 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 27th cabinet." ::= { g3health 63 } g3healthCab28 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 28th cabinet." ::= { g3health 64 } g3healthCab29 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 29th cabinet." ::= { g3health 65 } g3healthCab30 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 30th cabinet." ::= { g3health 66 } g3healthPncStat16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 67 } g3healthPncStat17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 68 } g3healthPncStat18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 69 } g3healthPncStat19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 70 } g3healthPncStat20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 71 } g3healthPncStat21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 72 } g3healthPncStat22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 73 } g3healthPncStat23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 74 } g3healthPncStat24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 75 } g3healthPncStat25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 76 } g3healthPncStat26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 77 } g3healthPncStat27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 78 } g3healthPncStat28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 79 } g3healthPncStat29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 80 } g3healthPncStat30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 81 } g3healthCab31 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 31st cabinet." ::= { g3health 82 } g3healthCab32 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 32nd cabinet." ::= { g3health 83 } g3healthCab33 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 33rd cabinet." ::= { g3health 84 } g3healthCab34 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 34th cabinet." ::= { g3health 85 } g3healthCab35 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 35th cabinet." ::= { g3health 86 } g3healthCab36 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 36th cabinet." ::= { g3health 87 } g3healthCab37 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 37th cabinet." ::= { g3health 88 } g3healthCab38 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 38th cabinet." ::= { g3health 89 } g3healthCab39 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 39th cabinet." ::= { g3health 90 } g3healthCab40 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 40th cabinet." ::= { g3health 91 } g3healthCab41 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 41st cabinet." ::= { g3health 92 } g3healthCab42 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 42nd cabinet." ::= { g3health 93 } g3healthCab43 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 43rd cabinet." ::= { g3health 94 } g3healthCab44 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 44th cabinet." ::= { g3health 95 } g3healthPncStat31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 96 } g3healthPncStat32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 97 } g3healthPncStat33 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 98 } g3healthPncStat34 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 99 } g3healthPncStat35 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 100 } g3healthPncStat36 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 101 } g3healthPncStat37 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 102 } g3healthPncStat38 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 103 } g3healthPncStat39 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 104 } g3healthPncStat40 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 105 } g3healthPncStat41 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 106 } g3healthPncStat42 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 107 } g3healthPncStat43 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 108 } g3healthPncStat44 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 109 } g3healthCab45 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 45th cabinet." ::= { g3health 110 } g3healthCab46 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 46th cabinet." ::= { g3health 111 } g3healthCab47 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 47th cabinet." ::= { g3health 112 } g3healthCab48 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 48th cabinet." ::= { g3health 113 } g3healthCab49 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 49th cabinet." ::= { g3health 114 } g3healthCab50 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 50th cabinet." ::= { g3health 115 } g3healthCab51 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 51st cabinet." ::= { g3health 116 } g3healthCab52 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 52nd cabinet." ::= { g3health 117 } g3healthCab53 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 53rd cabinet." ::= { g3health 118 } g3healthCab54 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 54th cabinet." ::= { g3health 119 } g3healthCab55 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 55th cabinet." ::= { g3health 120 } g3healthCab56 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 56th cabinet." ::= { g3health 121 } g3healthCab57 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 57th cabinet." ::= { g3health 122 } g3healthCab58 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 58th cabinet." ::= { g3health 123 } g3healthCab59 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 59th cabinet." ::= { g3health 124 } g3healthCab60 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 60th cabinet." ::= { g3health 125 } g3healthCab61 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 61st cabinet." ::= { g3health 126 } g3healthCab62 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 62nd cabinet." ::= { g3health 127 } g3healthCab63 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 63rd cabinet." ::= { g3health 128 } g3healthCab64 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of the 64th cabinet." ::= { g3health 129 } g3healthPncStat45 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 130 } g3healthPncStat46 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 131 } g3healthPncStat47 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corresponding cabinet (CabX) field." ::= { g3health 132 } g3healthPncStat48 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 133 } g3healthPncStat49 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 134 } g3healthPncStat50 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 135 } g3healthPncStat51 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 136 } g3healthPncStat52 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 137 } g3healthPncStat53 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 138 } g3healthPncStat54 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 139 } g3healthPncStat55 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 140 } g3healthPncStat56 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 141 } g3healthPncStat57 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 142 } g3healthPncStat58 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 143 } g3healthPncStat59 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 144 } g3healthPncStat60 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 145 } g3healthPncStat61 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 146 } g3healthPncStat62 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 147 } g3healthPncStat63 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 148 } g3healthPncStat64 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the status of the PNC that is associated with the corrresponding cabinet (CabX) field." ::= { g3health 149 } -- the g3cabinet group g3cabinetTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the cabinet data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cabinetTintvl object allows the Network Manager to determine the validity of the error log in the cache and to control when the proxy agent extracts the cabinet data from the switch." ::= { g3cabinet 1 } g3cabinetTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the cabinet data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for cabinet objects is received by the agent it uses the g3cabinetTage and g3cabinetTintvl objects to determine whether it should refresh the cached cabinetTable. If g3cabinetTstmp + g3cabinetTintvl is less than the current value of the sysUpTime object then the agent refreshes the cabinetTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3cabinet 2 } g3cabinetTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3cabinet 3 } g3cabinetTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3cabinet 4 } g3cabinetTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3cabinet 5 } g3cabinetTable OBJECT-TYPE SYNTAX SEQUENCE OF G3cabinetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3cabinet entries." ::= { g3cabinet 6 } g3cabinetEntry OBJECT-TYPE SYNTAX G3cabinetEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3cabinet entry containing objects of the g3cabinet information sent by the switch." INDEX { g3cabinetNum } ::= { g3cabinetTable 1 } G3cabinetEntry ::= SEQUENCE { g3cabinetNum INTEGER, g3cabinetType DisplayString, g3cabinetLayout DisplayString, g3cabinetRoom DisplayString, g3cabinetFloor DisplayString, g3cabinetBuilding DisplayString, g3cabinetCarAType DisplayString, g3cabinetCarAPNN INTEGER, g3cabinetCarBType DisplayString, g3cabinetCarBPNN INTEGER, g3cabinetCarCType DisplayString, g3cabinetCarCPNN INTEGER, g3cabinetCarDType DisplayString, g3cabinetCarDPNN INTEGER, g3cabinetCarEType DisplayString, g3cabinetCarEPNN INTEGER, g3cabinetSREPN DisplayString, g3cabinetSRProductID DisplayString, g3cabinetRack DisplayString, g3cabinetLocation DisplayString } g3cabinetNum OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies a cabinet in the system." ::= { g3cabinetEntry 1 } g3cabinetType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..22)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet (PPN or EPN)." ::= { g3cabinetEntry 2 } g3cabinetLayout OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the cabinet layout." ::= { g3cabinetEntry 3 } g3cabinetRoom OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the cabinet room number." ::= { g3cabinetEntry 4 } g3cabinetFloor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the cabinet floor number." ::= { g3cabinetEntry 5 } g3cabinetBuilding OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the cabinet building name." ::= { g3cabinetEntry 6 } g3cabinetCarAType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of carrier A." ::= { g3cabinetEntry 7 } g3cabinetCarAPNN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the Port Network Number in carrier A." ::= { g3cabinetEntry 8 } g3cabinetCarBType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of carrier B." ::= { g3cabinetEntry 9 } g3cabinetCarBPNN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the Port Network Number in carrier B." ::= { g3cabinetEntry 10 } g3cabinetCarCType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of carrier C." ::= { g3cabinetEntry 11 } g3cabinetCarCPNN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the Port Network Number in carrier C." ::= { g3cabinetEntry 12 } g3cabinetCarDType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of carrier D." ::= { g3cabinetEntry 13 } g3cabinetCarDPNN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the Port Network Number in carrier D." ::= { g3cabinetEntry 14 } g3cabinetCarEType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of carrier E." ::= { g3cabinetEntry 15 } g3cabinetCarEPNN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the Port Network Number in carrier E." ::= { g3cabinetEntry 16 } g3cabinetSREPN OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that states whether the EPN is a survivable remote EPN (y or n)." ::= { g3cabinetEntry 17 } g3cabinetSRProductID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the product ID of the survivable remote EPN (if the EPN is survivable remote)." ::= { g3cabinetEntry 18 } g3cabinetRack OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the rack-mount location." ::= { g3cabinetEntry 19 } g3cabinetLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the network location of the cabinet." ::= { g3cabinetEntry 20 } -- the g3cabtype group g3cabtypeTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the cabtype data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cabtypeTintvl object allows the Network Manager to determine the validity of the cabtype data in the cache and to control when the proxy agent extracts the cabtype data from the switch." ::= { g3cabtype 1 } g3cabtypeTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the cabtype data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for cabtype objects is received by the agent it uses the g3cabtypeTage and g3cabtypeTintvl objects to determine whether it should refresh the cached cabtype data. If g3cabtypeTstmp + g3cabtypeTintvl is less than the current value of the sysUpTime object then the agent refreshes the cabtype data cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3cabtype 2 } g3cabtypeTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3cabtype 3 } g3cabtypeTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3cabtype 4 } g3cabtypeCab1Type OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 1." ::= { g3cabtype 5 } g3cabtypeCab2Type OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 2." ::= { g3cabtype 6 } g3cabtypeCab3Type OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 3." ::= { g3cabtype 7 } -- the g3cartype group g3cartypeTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the cartype data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3cartypeTintvl object allows the Network Manager to determine the validity of the cartype data in the cache and to control when the proxy agent extracts the cartype data from the switch." ::= { g3cartype 1 } g3cartypeTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the cartype data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for cartype objects is received by the agent it uses the g3cartypeTage and g3cartypeTintvl objects to determine whether it should refresh the cached cartype data. If g3cartypeTstmp + g3cartypeTintvl is less than the current value of the sysUpTime object then the agent refreshes the cartype data cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3cartype 2 } g3cartypeTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3cartype 3 } g3cartypeTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3cartype 4 } g3cartypeCab1CarAType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 1/carrier A." ::= { g3cartype 5 } g3cartypeCab1CarBType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 1/carrier B." ::= { g3cartype 6 } g3cartypeCab1CarCType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 1/carrier C." ::= { g3cartype 7 } g3cartypeCab1CarDType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 1/carrier D." ::= { g3cartype 8 } g3cartypeCab1CarEType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 1/carrier E." ::= { g3cartype 9 } g3cartypeCab2CarAType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 2/carrier A." ::= { g3cartype 10 } g3cartypeCab2CarBType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 2/carrier B." ::= { g3cartype 11 } g3cartypeCab2CarCType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 2/carrier C." ::= { g3cartype 12 } g3cartypeCab2CarDType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 2/carrier D." ::= { g3cartype 13 } g3cartypeCab2CarEType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 2/carrier E." ::= { g3cartype 14 } g3cartypeCab3CarAType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 3/carrier A." ::= { g3cartype 15 } g3cartypeCab3CarBType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 3/carrier B." ::= { g3cartype 16 } g3cartypeCab3CarCType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 3/carrier C." ::= { g3cartype 17 } g3cartypeCab3CarDType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 3/carrier D." ::= { g3cartype 18 } g3cartypeCab3CarEType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of cabinet 3/carrier E." ::= { g3cartype 19 } -- the g3port group g3portTable OBJECT-TYPE SYNTAX SEQUENCE OF G3portEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3port entries." ::= { g3port 1 } g3portEntry OBJECT-TYPE SYNTAX G3portEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3port entry containing objects of the g3port information sent by the switch." INDEX { g3portNumber } ::= { g3portTable 1 } G3portEntry ::= SEQUENCE { g3portNumber DisplayString, g3portEquipType DisplayString, g3portId DisplayString, g3portEquipType2 DisplayString, g3portId2 DisplayString } g3portNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32). This object will serve as the instance identifier for portEntry." ::= { g3portEntry 1 } g3portEquipType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the equipment type for the port." ::= { g3portEntry 2 } g3portId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the identifier associated with the equipment type." ::= { g3portEntry 3 } g3portEquipType2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the equipment type for a second physical port." ::= { g3portEntry 4 } g3portId2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the identifier associated with the equipment type for a second physical port." ::= { g3portEntry 5 } -- the g3station group g3stationTable OBJECT-TYPE SYNTAX SEQUENCE OF G3stationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3station entries." ::= { g3station 1 } g3stationEntry OBJECT-TYPE SYNTAX G3stationEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3station entry containing objects of the g3station information sent by the switch." INDEX { g3stationExtension } ::= { g3stationTable 1 } G3stationEntry ::= SEQUENCE { g3stationExtension DisplayString, g3stationType DisplayString, g3stationName DisplayString, g3stationBuilding DisplayString, g3stationFloor DisplayString, g3stationRoom DisplayString, g3stationCable DisplayString, g3stationJack DisplayString, g3stationDataExt DisplayString, g3stationDataName DisplayString, g3stationPort DisplayString } g3stationExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies an administered station." ::= { g3stationEntry 1 } g3stationType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the station type." ::= { g3stationEntry 2 } g3stationName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..27)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name assigned to the station." ::= { g3stationEntry 3 } g3stationBuilding OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the building location of the station." ::= { g3stationEntry 4 } g3stationFloor OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the floor location of the station." ::= { g3stationEntry 5 } g3stationRoom OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the room location of the station." ::= { g3stationEntry 6 } g3stationCable OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the cable used by the station." ::= { g3stationEntry 7 } g3stationJack OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the jack used by the station." ::= { g3stationEntry 8 } g3stationDataExt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A Display String Object containing the extension of the data module attached to the station." ::= { g3stationEntry 9 } g3stationDataName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name assigned to the data module attached to the station." ::= { g3stationEntry 10 } g3stationPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the station port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22):carrier(A-E):slot(01-20)." ::= { g3stationEntry 11 } -- the g3statsta group g3statstaTable OBJECT-TYPE SYNTAX SEQUENCE OF G3statstaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3statsta entries." ::= { g3statsta 1 } g3statstaEntry OBJECT-TYPE SYNTAX G3statstaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3statsta entry containing objects of the g3statsta information sent by the switch." INDEX { g3statstaExtension } ::= { g3statstaTable 1 } G3statstaEntry ::= SEQUENCE { g3statstaExtension DisplayString, g3statstaServiceState DisplayString, g3statstaMaintBusy DisplayString, g3statstaConnPort1 DisplayString, g3statstaConnPort2 DisplayString, g3statstaConnPort3 DisplayString, g3statstaConnPort4 DisplayString, g3statstaConnPort5 DisplayString, g3statstaConnPort6 DisplayString, g3statstaSACactive DisplayString, g3statstaCFdestExt DisplayString, g3statstaRingCutOff DisplayString, g3statstaSerialNbr DisplayString, g3statstaPartID DisplayString, g3statstaSwitchPort DisplayString, g3statstaSwitchIPAddr DisplayString, g3statstaSwitchIPPort DisplayString, g3statstaSetIPAddr DisplayString, g3statstaSetIPPort DisplayString } g3statstaExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies an administered station." ::= { g3statstaEntry 1 } g3statstaServiceState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..22)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the service state of the station." ::= { g3statstaEntry 2 } g3statstaMaintBusy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether the station has been busied for maintenance." ::= { g3statstaEntry 3 } g3statstaConnPort1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the first port connected to the station." ::= { g3statstaEntry 4 } g3statstaConnPort2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the second port connected to the station." ::= { g3statstaEntry 5 } g3statstaConnPort3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the third port connected to the station." ::= { g3statstaEntry 6 } g3statstaConnPort4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the fourth port connected to the station." ::= { g3statstaEntry 7 } g3statstaConnPort5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the fifth port connected to the station." ::= { g3statstaEntry 8 } g3statstaConnPort6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the sixth port connected to the station." ::= { g3statstaEntry 9 } g3statstaSACactive OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether SAC has been activated for the station." ::= { g3statstaEntry 10 } g3statstaCFdestExt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the CF Destination Extension for the station." ::= { g3statstaEntry 11 } g3statstaRingCutOff OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether Ring Cut Off has been activated for the station." ::= { g3statstaEntry 12 } g3statstaSerialNbr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the serial number for the station." ::= { g3statstaEntry 13 } g3statstaPartID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the part id for the station." ::= { g3statstaEntry 14 } g3statstaSwitchPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the switch port for the station." ::= { g3statstaEntry 15 } g3statstaSwitchIPAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the switch-end IP address for the station." ::= { g3statstaEntry 16 } g3statstaSwitchIPPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the switch-end IP port nbr for the station." ::= { g3statstaEntry 17 } g3statstaSetIPAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the set-end IP address for the station." ::= { g3statstaEntry 18 } g3statstaSetIPPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the set-end IP port nbr for the station." ::= { g3statstaEntry 19 } -- the g3trunkmem group g3trunkmemTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunkmemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunkmem entries." ::= { g3trunkmem 1 } g3trunkmemEntry OBJECT-TYPE SYNTAX G3trunkmemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunkmem entry containing objects of the g3trunkmem information sent by the switch." INDEX { g3trunkmemGroup, g3trunkmemMember } ::= { g3trunkmemTable 1 } G3trunkmemEntry ::= SEQUENCE { g3trunkmemGroup INTEGER, g3trunkmemMember INTEGER, g3trunkmemName DisplayString, g3trunkmemType DisplayString, g3trunkmemSigGroup DisplayString, g3trunkmemPort DisplayString } g3trunkmemGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered trunk group." ::= { g3trunkmemEntry 1 } g3trunkmemMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies a trunk group member." ::= { g3trunkmemEntry 2 } g3trunkmemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name assigned to the trunk group member." ::= { g3trunkmemEntry 3 } g3trunkmemType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Type of the trunk group member." ::= { g3trunkmemEntry 4 } g3trunkmemSigGroup OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Signaling Group assigned to the trunk group member." ::= { g3trunkmemEntry 5 } g3trunkmemPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the trunk port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22):carrier(A-E):slot(01-20)." ::= { g3trunkmemEntry 6 } -- the g3trunksta group g3trunkstaTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunkstaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunksta entries." ::= { g3trunksta 1 } g3trunkstaEntry OBJECT-TYPE SYNTAX G3trunkstaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunksta entry containing objects of the g3trunksta information sent by the switch." INDEX { g3trunkstaTrunkGroup, g3trunkstaMember } ::= { g3trunkstaTable 1 } G3trunkstaEntry ::= SEQUENCE { g3trunkstaTrunkGroup INTEGER, g3trunkstaMember INTEGER, g3trunkstaServiceState DisplayString, g3trunkstaMaintBusy DisplayString, g3trunkstaConnPort1 DisplayString, g3trunkstaConnPort2 DisplayString, g3trunkstaConnPort3 DisplayString, g3trunkstaConnPort4 DisplayString, g3trunkstaConnPort5 DisplayString, g3trunkstaConnPort6 DisplayString, g3trunkstaConnPort7 DisplayString, g3trunkstaConnPort8 DisplayString, g3trunkstaConnPort9 DisplayString } g3trunkstaTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered trunk group." ::= { g3trunkstaEntry 1 } g3trunkstaMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies a trunk group member." ::= { g3trunkstaEntry 2 } g3trunkstaServiceState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the service state of the trunk." ::= { g3trunkstaEntry 3 } g3trunkstaMaintBusy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether the trunk has been busied for maintenance." ::= { g3trunkstaEntry 4 } g3trunkstaConnPort1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the first port connected to the trunk." ::= { g3trunkstaEntry 5 } g3trunkstaConnPort2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the second port connected to the trunk." ::= { g3trunkstaEntry 6 } g3trunkstaConnPort3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the third port connected to the trunk." ::= { g3trunkstaEntry 7 } g3trunkstaConnPort4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the fourth port connected to the trunk." ::= { g3trunkstaEntry 8 } g3trunkstaConnPort5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the fifth port connected to the trunk." ::= { g3trunkstaEntry 9 } g3trunkstaConnPort6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the sixth port connected to the trunk." ::= { g3trunkstaEntry 10 } g3trunkstaConnPort7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the seventh port connected to the trunk." ::= { g3trunkstaEntry 11 } g3trunkstaConnPort8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the eighth port connected to the trunk." ::= { g3trunkstaEntry 12 } g3trunkstaConnPort9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the ninth port connected to the trunk." ::= { g3trunkstaEntry 13 } -- the g3datamod group g3datamodTable OBJECT-TYPE SYNTAX SEQUENCE OF G3datamodEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3datamod entries." ::= { g3datamod 1 } g3datamodEntry OBJECT-TYPE SYNTAX G3datamodEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3datamod entry containing objects of the g3datamod information sent by the switch." INDEX { g3datamodExtension } ::= { g3datamodTable 1 } G3datamodEntry ::= SEQUENCE { g3datamodExtension DisplayString, g3datamodType DisplayString, g3datamodName DisplayString } g3datamodExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies an administered data module." ::= { g3datamodEntry 1 } g3datamodType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the data module type." ::= { g3datamodEntry 2 } g3datamodName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name assigned to the data module." ::= { g3datamodEntry 3 } -- the g3datamsta group g3datamstaTable OBJECT-TYPE SYNTAX SEQUENCE OF G3datamstaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3datamsta entries." ::= { g3datamsta 1 } g3datamstaEntry OBJECT-TYPE SYNTAX G3datamstaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3datamsta entry containing objects of the g3datamsta information sent by the switch." INDEX { g3datamstaExtension } ::= { g3datamstaTable 1 } G3datamstaEntry ::= SEQUENCE { g3datamstaExtension DisplayString, g3datamstaServiceState DisplayString, g3datamstaMaintBusy DisplayString, g3datamstaConnPort1 DisplayString, g3datamstaConnPort2 DisplayString, g3datamstaConnPort3 DisplayString, g3datamstaConnPort4 DisplayString, g3datamstaConnPort5 DisplayString, g3datamstaConnPort6 DisplayString, g3datamstaConnPort7 DisplayString, g3datamstaConnPort8 DisplayString, g3datamstaConnPort9 DisplayString, g3datamstaCFdestExt DisplayString } g3datamstaExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies an administered data module." ::= { g3datamstaEntry 1 } g3datamstaServiceState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the service state of the data module." ::= { g3datamstaEntry 2 } g3datamstaMaintBusy OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether the data module has been busied for maintenance." ::= { g3datamstaEntry 3 } g3datamstaConnPort1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the first port connected to the data module." ::= { g3datamstaEntry 4 } g3datamstaConnPort2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the second port connected to the data module." ::= { g3datamstaEntry 5 } g3datamstaConnPort3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the third port connected to the data module." ::= { g3datamstaEntry 6 } g3datamstaConnPort4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the fourth port connected to the data module." ::= { g3datamstaEntry 7 } g3datamstaConnPort5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the fifth port connected to the data module." ::= { g3datamstaEntry 8 } g3datamstaConnPort6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the sixth port connected to the data module." ::= { g3datamstaEntry 9 } g3datamstaConnPort7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the seventh port connected to the data module." ::= { g3datamstaEntry 10 } g3datamstaConnPort8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the eighth port connected to the data module." ::= { g3datamstaEntry 11 } g3datamstaConnPort9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the ninth port connected to the data module." ::= { g3datamstaEntry 12 } g3datamstaCFdestExt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the CF Destination Extension for the data module." ::= { g3datamstaEntry 13 } -- the g3timedate group g3timedateDayOfMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Day of the Month (1-31)." ::= { g3timedate 1 } g3timedateMonth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString Object that contains the name of the Month ('January', 'February', 'March', 'April', 'May', 'June', 'July', 'August', 'September', 'October', 'November', or 'December')." ::= { g3timedate 2 } g3timedateYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Year (0000-9999)." ::= { g3timedate 3 } g3timedateDayOfWeek OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString Object that contains the day of the week ('Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', or 'Sunday')." ::= { g3timedate 4 } g3timedateHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Hour (0-23)." ::= { g3timedate 5 } g3timedateMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Minute (0-59)." ::= { g3timedate 6 } g3timedateSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Second (0-59)." ::= { g3timedate 7 } g3timedateLastError1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the last error message encountered when attempting to set the system date/time." ::= { g3timedate 8 } g3timedateLastError2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3timedateLastError1." ::= { g3timedate 9 } g3timedateLastError3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3timedateLastError1." ::= { g3timedate 10 } g3timedateLastError4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3timedateLastError1." ::= { g3timedate 11 } g3timedateLastError5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3timedateLastError1." ::= { g3timedate 12 } g3timedateLastError6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3timedateLastError1." ::= { g3timedate 13 } -- the g3busytrk group g3busytrkTable OBJECT-TYPE SYNTAX SEQUENCE OF G3busytrkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3busytrk entries." ::= { g3busytrk 1 } g3busytrkEntry OBJECT-TYPE SYNTAX G3busytrkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3busytrk entry containing objects of the g3busytrk information sent by the switch." INDEX { g3busytrkGroup, g3busytrkMember } ::= { g3busytrkTable 1 } G3busytrkEntry ::= SEQUENCE { g3busytrkAction DisplayString, g3busytrkObject DisplayString, g3busytrkGroup INTEGER, g3busytrkMember INTEGER, g3busytrkIndex INTEGER, g3busytrkPort DisplayString, g3busytrkMaintName DisplayString, g3busytrkAltName DisplayString, g3busytrkResult DisplayString, g3busytrkErrorCode DisplayString, g3busytrkLastError DisplayString, g3busytrkUDateStr DisplayString } g3busytrkAction OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the last action performed on the trunk group and trunk member ('busyout' or 'release')." ::= { g3busytrkEntry 1 } g3busytrkObject OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the switch object 'trunk'." ::= { g3busytrkEntry 2 } g3busytrkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered trunk group on which a 'busyout' or 'release' operation was last performed." ::= { g3busytrkEntry 3 } g3busytrkMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered trunk member on which a 'busyout' or 'release' operation was last performed." ::= { g3busytrkEntry 4 } g3busytrkIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that identifies an index number for the trunk group and member number record (currently always set to '1')." ::= { g3busytrkEntry 5 } g3busytrkPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32)." ::= { g3busytrkEntry 6 } g3busytrkMaintName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the maintenance object name." ::= { g3busytrkEntry 7 } g3busytrkAltName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alternate name of the object." ::= { g3busytrkEntry 8 } g3busytrkResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the result of the last busyout/release operation." ::= { g3busytrkEntry 9 } g3busytrkErrorCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the error code associated with the result of the last busyout/release operation." ::= { g3busytrkEntry 10 } g3busytrkLastError OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the error message encountered on the last busyout/release operation. The string is blank if no command error was encountered on the last attempt." ::= { g3busytrkEntry 11 } g3busytrkUDateStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the UNIX time stamp when the result of the busyout/release operation was received." ::= { g3busytrkEntry 12 } -- the g3busybrd group g3busybrdTable OBJECT-TYPE SYNTAX SEQUENCE OF G3busybrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3busybrd entries." ::= { g3busybrd 1 } g3busybrdEntry OBJECT-TYPE SYNTAX G3busybrdEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3busybrd entry containing objects of the g3busybrd information sent by the switch." INDEX { g3busybrdBoardVal, g3busybrdPortVal } ::= { g3busybrdTable 1 } G3busybrdEntry ::= SEQUENCE { g3busybrdAction DisplayString, g3busybrdObject DisplayString, g3busybrdBoardVal DisplayString, g3busybrdPortVal INTEGER, g3busybrdIndex INTEGER, g3busybrdPort DisplayString, g3busybrdMaintName DisplayString, g3busybrdAltName DisplayString, g3busybrdResult DisplayString, g3busybrdErrorCode DisplayString, g3busybrdLastError DisplayString, g3busybrdUDateStr DisplayString } g3busybrdAction OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the last action performed on the board or port on a board ('busyout' or 'release')." ::= { g3busybrdEntry 1 } g3busybrdObject OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the switch object 'board'." ::= { g3busybrdEntry 2 } g3busybrdBoardVal OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a board based on its location in the system which a 'busyout' or 'release' operation was last performed. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3busybrdEntry 3 } g3busybrdPortVal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered port location on which a 'busyout' or 'release' operation was last performed." ::= { g3busybrdEntry 4 } g3busybrdIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that identifies an index number for the board /port number record (currently always set to '1')." ::= { g3busybrdEntry 5 } g3busybrdPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32)." ::= { g3busybrdEntry 6 } g3busybrdMaintName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the maintenance object name." ::= { g3busybrdEntry 7 } g3busybrdAltName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alternate name of the object." ::= { g3busybrdEntry 8 } g3busybrdResult OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the result of the last busyout/release operation." ::= { g3busybrdEntry 9 } g3busybrdErrorCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the error code associated with the result of the last busyout/release operation." ::= { g3busybrdEntry 10 } g3busybrdLastError OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the error message encountered on the last busyout/release operation. The string is blank if no command error was encountered on the last attempt." ::= { g3busybrdEntry 11 } g3busybrdUDateStr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the UNIX time stamp when the result of the busyout/release operation was received." ::= { g3busybrdEntry 12 } -- the g3servalm group g3servalmTable OBJECT-TYPE SYNTAX SEQUENCE OF G3servalmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3servalm entries." ::= { g3servalm 1 } g3servalmEntry OBJECT-TYPE SYNTAX G3servalmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3servalm entry containing objects of the g3servalm information sent by the switch." INDEX { g3servalmID } ::= { g3servalmTable 1 } G3servalmEntry ::= SEQUENCE { g3servalmID INTEGER, g3servalmSource DisplayString, g3servalmEventID DisplayString, g3servalmLevel DisplayString, g3servalmAck DisplayString, g3servalmDate DisplayString, g3servalmDescription DisplayString } g3servalmID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the server alarm." ::= { g3servalmEntry 1 } g3servalmSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the source of the alarm." ::= { g3servalmEntry 2 } g3servalmEventID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the event id of the alarm." ::= { g3servalmEntry 3 } g3servalmLevel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the level of the alarm." ::= { g3servalmEntry 4 } g3servalmAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alarm acknowledged flag." ::= { g3servalmEntry 5 } g3servalmDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the date the alarm was generated." ::= { g3servalmEntry 6 } g3servalmDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..120)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a description of the alarm." ::= { g3servalmEntry 7 } -- the g3msgalm group g3msgalmTable OBJECT-TYPE SYNTAX SEQUENCE OF G3msgalmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3msgalm entries." ::= { g3msgalm 1 } g3msgalmEntry OBJECT-TYPE SYNTAX G3msgalmEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3msgalm entry containing objects of the g3msgalm information sent by the switch." INDEX { g3msgalmID } ::= { g3msgalmTable 1 } G3msgalmEntry ::= SEQUENCE { g3msgalmID INTEGER, g3msgalmAPP DisplayString, g3msgalmSource DisplayString, g3msgalmEventID DisplayString, g3msgalmLevel DisplayString, g3msgalmAck DisplayString, g3msgalmLocation DisplayString, g3msgalmDate DisplayString, g3msgalmDescription DisplayString } g3msgalmID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the messaging alarm." ::= { g3msgalmEntry 1 } g3msgalmAPP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alarm APP." ::= { g3msgalmEntry 2 } g3msgalmSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the source of the alarm." ::= { g3msgalmEntry 3 } g3msgalmEventID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the event id of the alarm." ::= { g3msgalmEntry 4 } g3msgalmLevel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the level of the alarm." ::= { g3msgalmEntry 5 } g3msgalmAck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the alarm acknowledged flag." ::= { g3msgalmEntry 6 } g3msgalmLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the location of the alarm." ::= { g3msgalmEntry 7 } g3msgalmDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the date the alarm was generated." ::= { g3msgalmEntry 8 } g3msgalmDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..120)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a description of the alarm." ::= { g3msgalmEntry 9 } -- the g3ipevt group g3ipevtTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipevtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipevt entries." ::= { g3ipevt 1 } g3ipevtEntry OBJECT-TYPE SYNTAX G3ipevtEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipevt entry containing objects of the g3ipevt information sent by the switch." INDEX { g3ipevtIndex } ::= { g3ipevtTable 1 } G3ipevtEntry ::= SEQUENCE { g3ipevtIndex INTEGER, g3ipevtIPEvent DisplayString } g3ipevtIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing a unique index for each event in the IP event log for the current day." ::= { g3ipevtEntry 1 } g3ipevtIPEvent OBJECT-TYPE SYNTAX DisplayString (SIZE (0..200)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that defines an event in the IP event log for the current day." ::= { g3ipevtEntry 2 } -- the g3platcmds group g3platcmdsTable OBJECT-TYPE SYNTAX SEQUENCE OF G3platcmdsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3platcmds entries." ::= { g3platcmds 1 } g3platcmdsEntry OBJECT-TYPE SYNTAX G3platcmdsEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3platcmds entry containing objects of the g3platcmds information sent by the switch." INDEX { g3platcmdsSeqNumber } ::= { g3platcmdsTable 1 } G3platcmdsEntry ::= SEQUENCE { g3platcmdsDate DisplayString, g3platcmdsTime DisplayString, g3platcmdsSeqNumber INTEGER, g3platcmdsPriority DisplayString, g3platcmdsServerName DisplayString, g3platcmdsLoginId DisplayString, g3platcmdsCommand DisplayString } g3platcmdsDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the date the command was issued." ::= { g3platcmdsEntry 1 } g3platcmdsTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the time that the command was issued." ::= { g3platcmdsEntry 2 } g3platcmdsSeqNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-generated sequence number." ::= { g3platcmdsEntry 3 } g3platcmdsPriority OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the session priority." ::= { g3platcmdsEntry 4 } g3platcmdsServerName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the server name on which the command was issued." ::= { g3platcmdsEntry 5 } g3platcmdsLoginId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the login id of the user issuing the command." ::= { g3platcmdsEntry 6 } g3platcmdsCommand OBJECT-TYPE SYNTAX DisplayString (SIZE (0..200)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the command issued by the user." ::= { g3platcmdsEntry 7 } -- the g3version group g3versionOperSystem OBJECT-TYPE SYNTAX DisplayString (SIZE (0..50)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the operating system running on the server." ::= { g3version 1 } g3versionBuildDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing operation system build date." ::= { g3version 2 } g3versionLoadNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the current CM load number running on the server (e.g. 01.0.628.5)." ::= { g3version 3 } g3versionRlsNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the current CM release number (e.g. R013x.01.0.628.5)." ::= { g3version 4 } g3versionRlsString OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the CM release string (e.g. S8720-013-01.0.628.5)." ::= { g3version 5 } g3versionTransSaved OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the date and time that translation was last saved on the CM server." ::= { g3version 6 } g3versionLicInstalled OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the date and time that the license was installed on the CM server." ::= { g3version 7 } -- the g3update group g3updateTable OBJECT-TYPE SYNTAX SEQUENCE OF G3updateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3update entries." ::= { g3update 1 } g3updateEntry OBJECT-TYPE SYNTAX G3updateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3update entry containing objects of the g3update information sent by the switch." INDEX { g3updateID } ::= { g3updateTable 1 } G3updateEntry ::= SEQUENCE { g3updateID DisplayString, g3updateStatus DisplayString, g3updateType DisplayString, g3updateDescription DisplayString } g3updateID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the identifier for the installed update (e.g. 01.0.628.5-7777)." ::= { g3updateEntry 1 } g3updateStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing current status of the update (e.g. unpacked)." ::= { g3updateEntry 2 } g3updateType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the update type (e.g. cold)." ::= { g3updateEntry 3 } g3updateDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..80)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a description about the update." ::= { g3updateEntry 4 } -- the g3partition group g3partitionTable OBJECT-TYPE SYNTAX SEQUENCE OF G3partitionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3partition entries." ::= { g3partition 1 } g3partitionEntry OBJECT-TYPE SYNTAX G3partitionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3partition entry containing objects of the g3partition information sent by the switch." INDEX { g3partitionPhysPartition } ::= { g3partitionTable 1 } G3partitionEntry ::= SEQUENCE { g3partitionPhysPartition DisplayString, g3partitionSoftwareRls DisplayString, g3partitionBootPartition DisplayString, g3partitionActivePartition DisplayString } g3partitionPhysPartition OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the physical partition name (e.g. hda1)." ::= { g3partitionEntry 1 } g3partitionSoftwareRls OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing CM software release on the partition (e.g. 01.2.632.1)." ::= { g3partitionEntry 2 } g3partitionBootPartition OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object indicating whether the partition is the boot partition or not (yes or no)." ::= { g3partitionEntry 3 } g3partitionActivePartition OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object indicating whether the partition is the active partition or not (yes or no)." ::= { g3partitionEntry 4 } -- the g3ds1cfg group g3ds1cfgTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ds1 configuration data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ds1cfgTintvl object allows the Network Manager to determine the validity of the ds1 configuration data in the cache and to control when the proxy agent extracts the ds1 configuration data from the switch." ::= { g3ds1cfg 1 } g3ds1cfgTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the ds1 configuration data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ds1 configuration objects is received by the agent it uses the g3ds1cfgTage and g3ds1cfgTintvl objects to determine whether it should refresh the cached ds1cfgTable. If g3ds1cfgTstmp + g3ds1cfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the ds1cfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ds1cfg 2 } g3ds1cfgTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3ds1cfg 3 } g3ds1cfgTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ds1cfg 4 } g3ds1cfgTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ds1cfg 5 } g3ds1cfgTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ds1cfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ds1cfg entries." ::= { g3ds1cfg 6 } g3ds1cfgEntry OBJECT-TYPE SYNTAX G3ds1cfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ds1cfg entry containing objects of the g3ds1cfg information sent by the switch." INDEX { g3ds1cfgBoardNum } ::= { g3ds1cfgTable 1 } G3ds1cfgEntry ::= SEQUENCE { g3ds1cfgBoardNum DisplayString, g3ds1cfgCode DisplayString, g3ds1cfgSuffix DisplayString, g3ds1cfgVintage DisplayString, g3ds1cfgSignaling DisplayString, g3ds1cfgName DisplayString, g3ds1cfgCsuMod DisplayString } g3ds1cfgBoardNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3ds1cfgEntry 1 } g3ds1cfgCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the code that defines the type of board." ::= { g3ds1cfgEntry 2 } g3ds1cfgSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the suffix to the code" ::= { g3ds1cfgEntry 3 } g3ds1cfgVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the vintage of the board. (object ds1cfgCode) that defines the type of board." ::= { g3ds1cfgEntry 4 } g3ds1cfgSignaling OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the signaling of the board." ::= { g3ds1cfgEntry 5 } g3ds1cfgName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the name of the board." ::= { g3ds1cfgEntry 6 } g3ds1cfgCsuMod OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the type of CSU Mod." ::= { g3ds1cfgEntry 7 } -- the g3extdev group g3extdevTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the external device data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3extdevintvl object allows the Network Manager to determine the validity of the external device data in the cache and to control when the proxy agent extracts the external device data from the switch." ::= { g3extdev 1 } g3extdevTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the external device data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for external device objects is received by the agent it uses the g3extdevage and g3extdevintvl objects to determine whether it should refresh the cached extdevTable. If g3extdevstmp + g3extdevintvl is less than the current value of the sysUpTime object then the agent refreshes the extdevTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3extdev 2 } g3extdevTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3extdev 3 } g3extdevTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3extdev 4 } g3extdevTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3extdev 5 } g3extdevTable OBJECT-TYPE SYNTAX SEQUENCE OF G3extdevEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3extdev entries." ::= { g3extdev 6 } g3extdevEntry OBJECT-TYPE SYNTAX G3extdevEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3extdev entry containing objects of the g3extdev information sent by the switch." INDEX { g3extdevPort } ::= { g3extdevTable 1 } G3extdevEntry ::= SEQUENCE { g3extdevPort DisplayString, g3extdevType DisplayString, g3extdevAltName DisplayString, g3extdevDescription DisplayString, g3extdevID DisplayString, g3extdevBuilding DisplayString, g3extdevAddress DisplayString } g3extdevPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a port based on its location in the system. The syntax for the Port Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32)." ::= { g3extdevEntry 1 } g3extdevType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that defines the type of the device." ::= { g3extdevEntry 2 } g3extdevAltName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the alternate name for the device." ::= { g3extdevEntry 3 } g3extdevDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..43)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that describes the external device." ::= { g3extdevEntry 4 } g3extdevID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the product identifier of the external device." ::= { g3extdevEntry 5 } g3extdevBuilding OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the building location of the external device." ::= { g3extdevEntry 6 } g3extdevAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the address of the external device." ::= { g3extdevEntry 7 } -- the g3trunkgrp group g3trunkgrpTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the trunk group data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3trunkgrpintvl object allows the Network Manager to determine the validity of the trunk group data in the cache and to control when the proxy agent extracts the trunk group data from the switch." ::= { g3trunkgrp 1 } g3trunkgrpTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the trunk group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for trunk group objects is received by the agent it uses the g3trunkgrpage and g3trunkgrpintvl objects to determine whether it should refresh the cached trunkgrpTable. If g3trunkgrpstmp + g3trunkgrpintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkgrpTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3trunkgrp 2 } g3trunkgrpTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3trunkgrp 3 } g3trunkgrpTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3trunkgrp 4 } g3trunkgrpTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3trunkgrp 5 } g3trunkgrpTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunkgrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunkgrp entries." ::= { g3trunkgrp 6 } g3trunkgrpEntry OBJECT-TYPE SYNTAX G3trunkgrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunkgrp entry containing objects of the g3trunkgrp information sent by the switch." INDEX { g3trunkgrpNumber } ::= { g3trunkgrpTable 1 } G3trunkgrpEntry ::= SEQUENCE { g3trunkgrpNumber INTEGER, g3trunkgrpType DisplayString, g3trunkgrpName DisplayString, g3trunkgrpDirection DisplayString, g3trunkgrpServiceType DisplayString, g3trunkgrpCommType DisplayString, g3trunkgrpTrunkType DisplayString, g3trunkgrpSize INTEGER, g3trunkgrpUsageAlloc DisplayString, g3trunkgrpTAC INTEGER, g3trunkgrpWideSupport DisplayString, g3trunkgrpDCSFlag DisplayString, g3trunkgrpPbxID INTEGER, g3trunkgrpDCSSigType DisplayString, g3trunkgrpSigType DisplayString, g3trunkgrpACAFlag DisplayString, g3trunkgrpLongHold INTEGER, g3trunkgrpShortHold INTEGER, g3trunkgrpShortThreshold INTEGER, g3trunkgrpQsigValueAdd DisplayString, g3trunkgrpSuppServProt DisplayString } g3trunkgrpNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered trunk group." ::= { g3trunkgrpEntry 1 } g3trunkgrpType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..13)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trunk group type." ::= { g3trunkgrpEntry 2 } g3trunkgrpName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name assigned to the trunk group." ::= { g3trunkgrpEntry 3 } g3trunkgrpDirection OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trunk group direction." ::= { g3trunkgrpEntry 4 } g3trunkgrpServiceType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trunk group service type." ::= { g3trunkgrpEntry 5 } g3trunkgrpCommType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trunk group communications type." ::= { g3trunkgrpEntry 6 } g3trunkgrpTrunkType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trunk group trunk type." ::= { g3trunkgrpEntry 7 } g3trunkgrpSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the number of trunk group members." ::= { g3trunkgrpEntry 8 } g3trunkgrpUsageAlloc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a y/n flag for usage allocation." ::= { g3trunkgrpEntry 9 } g3trunkgrpTAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Access Code for the trunk group." ::= { g3trunkgrpEntry 10 } g3trunkgrpWideSupport OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a wideband support flag." ::= { g3trunkgrpEntry 11 } g3trunkgrpDCSFlag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the flag that shows whether the trunk is used for DCS (y or n)." ::= { g3trunkgrpEntry 12 } g3trunkgrpPbxID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the identifier of the PBX." ::= { g3trunkgrpEntry 13 } g3trunkgrpDCSSigType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the DCS signaling type." ::= { g3trunkgrpEntry 14 } g3trunkgrpSigType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trunk signaling type." ::= { g3trunkgrpEntry 15 } g3trunkgrpACAFlag OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the flag that shows whether the trunk is used for ACA (y or n)." ::= { g3trunkgrpEntry 16 } g3trunkgrpLongHold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the long holding time in hours." ::= { g3trunkgrpEntry 17 } g3trunkgrpShortHold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the short holding time in seconds." ::= { g3trunkgrpEntry 18 } g3trunkgrpShortThreshold OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object containing the short hold time threshold." ::= { g3trunkgrpEntry 19 } g3trunkgrpQsigValueAdd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a flag that indicates whether or not QSIG Value-Added is in use (y or n)." ::= { g3trunkgrpEntry 20 } g3trunkgrpSuppServProt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object specifying which supplementary server protocol is being used (can have a value of a-g)." ::= { g3trunkgrpEntry 21 } -- the g3bulletin group g3bulletinTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the bulletin board data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3bulletinintvl object allows the Network Manager to determine the validity of the bulletin board data in the cache and to control when the proxy agent extracts the bulletin board data from the switch." ::= { g3bulletin 1 } g3bulletinTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the bulletin board data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for bulletin board objects is received by the agent it uses the g3bulletinage and g3bulletinintvl objects to determine whether it should refresh the cached bulletinTable. If g3bulletinstmp + g3bulletinintvl is less than the current value of the sysUpTime object then the agent refreshes the bulletinTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3bulletin 2 } g3bulletinTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3bulletin 3 } g3bulletinTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3bulletin 4 } g3bulletinMessage1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a bulletin board message. A message posted to the bulletin board can consist of one or more Message fields entered by the user. The Message fields can contain any character string that the user can enter on the keyboard. The Message field can also be blank." ::= { g3bulletin 5 } g3bulletinMessage2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 6 } g3bulletinMessage3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 7 } g3bulletinMessage4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 8 } g3bulletinMessage5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 9 } g3bulletinMessage6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 10 } g3bulletinMessage7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 11 } g3bulletinMessage8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 12 } g3bulletinMessage9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 13 } g3bulletinMessage10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 14 } g3bulletinMessage11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 15 } g3bulletinMessage12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 16 } g3bulletinMessage13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 17 } g3bulletinMessage14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 18 } g3bulletinMessage15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 19 } g3bulletinMessage16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 20 } g3bulletinMessage17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 21 } g3bulletinMessage18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 22 } g3bulletinMessage19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 23 } g3bulletinMessage20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 24 } g3bulletinMessage21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 25 } g3bulletinMessage22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 26 } g3bulletinMessage23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 27 } g3bulletinMessage24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 28 } g3bulletinMessage25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 29 } g3bulletinMessage26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 30 } g3bulletinMessage27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 31 } g3bulletinMessage28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 32 } g3bulletinMessage29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 33 } g3bulletinMessage30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 34 } g3bulletinMessage31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 35 } g3bulletinMessage32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 36 } g3bulletinMessage33 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 37 } g3bulletinMessage34 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 38 } g3bulletinMessage35 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 39 } g3bulletinMessage36 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 40 } g3bulletinMessage37 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 41 } g3bulletinMessage38 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 42 } g3bulletinMessage39 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 43 } g3bulletinMessage40 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 44 } g3bulletinMessage41 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 45 } g3bulletinMessage42 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 46 } g3bulletinMessage43 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 47 } g3bulletinMessage44 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 48 } g3bulletinMessage45 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 49 } g3bulletinMessage46 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 50 } g3bulletinMessage47 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 51 } g3bulletinMessage48 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 52 } g3bulletinMessage49 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 53 } g3bulletinMessage50 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 54 } g3bulletinMessage51 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 55 } g3bulletinMessage52 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 56 } g3bulletinMessage53 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 57 } g3bulletinMessage54 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 58 } g3bulletinMessage55 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 59 } g3bulletinMessage56 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 60 } g3bulletinMessage57 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 61 } g3bulletinMessage58 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 62 } g3bulletinMessage59 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinMessage1." ::= { g3bulletin 63 } g3bulletinDate1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a bulletin board Date. Each Date field is associated with a Message field. If the associated Message field is not blank, the Date field identifies the date on which the bulletin board message was posted. If the associated Message field is blank, then the Date field will be blank." ::= { g3bulletin 64 } g3bulletinDate2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 65 } g3bulletinDate3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 66 } g3bulletinDate4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 67 } g3bulletinDate5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 68 } g3bulletinDate6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 69 } g3bulletinDate7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 70 } g3bulletinDate8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 71 } g3bulletinDate9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 72 } g3bulletinDate10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 73 } g3bulletinDate11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 74 } g3bulletinDate12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 75 } g3bulletinDate13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 76 } g3bulletinDate14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 77 } g3bulletinDate15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 78 } g3bulletinDate16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 79 } g3bulletinDate17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 80 } g3bulletinDate18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 81 } g3bulletinDate19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 82 } g3bulletinDate20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 83 } g3bulletinDate21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 84 } g3bulletinDate22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 85 } g3bulletinDate23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 86 } g3bulletinDate24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 87 } g3bulletinDate25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 88 } g3bulletinDate26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 89 } g3bulletinDate27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 90 } g3bulletinDate28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 91 } g3bulletinDate29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 92 } g3bulletinDate30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 93 } g3bulletinDate31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 94 } g3bulletinDate32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 95 } g3bulletinDate33 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 96 } g3bulletinDate34 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 97 } g3bulletinDate35 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 98 } g3bulletinDate36 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 99 } g3bulletinDate37 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 100 } g3bulletinDate38 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 101 } g3bulletinDate39 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 102 } g3bulletinDate40 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 103 } g3bulletinDate41 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 104 } g3bulletinDate42 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 105 } g3bulletinDate43 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 106 } g3bulletinDate44 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 107 } g3bulletinDate45 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 108 } g3bulletinDate46 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 109 } g3bulletinDate47 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 110 } g3bulletinDate48 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 111 } g3bulletinDate49 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 112 } g3bulletinDate50 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 113 } g3bulletinDate51 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 114 } g3bulletinDate52 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 115 } g3bulletinDate53 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 116 } g3bulletinDate54 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 117 } g3bulletinDate55 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 118 } g3bulletinDate56 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 119 } g3bulletinDate57 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 120 } g3bulletinDate58 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 121 } g3bulletinDate59 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3bulletinDate1." ::= { g3bulletin 122 } -- the g3ds1 group g3ds1Tage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ds1 data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ds1intvl object allows the Network Manager to determine the validity of the ds1 data in the cache and to control when the proxy agent extracts the ds1 data from the switch." ::= { g3ds1 1 } g3ds1Tintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the ds1 data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ds1 objects is received by the agent it uses the g3ds1age and g3ds1intvl objects to determine whether it should refresh the cached ds1Table. If g3ds1stmp + g3ds1intvl is less than the current value of the sysUpTime object then the agent refreshes the ds1Table cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ds1 2 } g3ds1Tdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3ds1 3 } g3ds1Tretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ds1 4 } g3ds1Tcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ds1 5 } g3ds1Table OBJECT-TYPE SYNTAX SEQUENCE OF G3ds1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ds1 entries." ::= { g3ds1 6 } g3ds1Entry OBJECT-TYPE SYNTAX G3ds1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ds1 entry containing objects of the g3ds1 information sent by the switch." INDEX { g3ds1Location } ::= { g3ds1Table 1 } G3ds1Entry ::= SEQUENCE { g3ds1Location DisplayString, g3ds1BitRate DisplayString, g3ds1Signaling DisplayString, g3ds1Name DisplayString } g3ds1Location OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a DS1 port board based on its location in the system. The syntax for the Port Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3ds1Entry 1 } g3ds1BitRate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Bit Rate for the DS1 board." ::= { g3ds1Entry 2 } g3ds1Signaling OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the signaling of the board" ::= { g3ds1Entry 3 } g3ds1Name OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the name of the board" ::= { g3ds1Entry 4 } -- the g3atmpnc group g3atmpncTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ATM PNC data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3atmpncintvl object allows the Network Manager to determine the validity of the ATM PNC data in the cache and to control when the proxy agent extracts the ATM PNC data from the switch." ::= { g3atmpnc 1 } g3atmpncTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the ATM PNC group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ATM PNC objects is received by the agent it uses the g3atmpncage and g3atmpncintvl objects to determine whether it should refresh the cached atmpncTable. If g3atmpncage + g3atmpncintvl is less than the current value of the sysUpTime object then the agent refreshes the atmpncTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3atmpnc 2 } g3atmpncTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3atmpnc 3 } g3atmpncTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3atmpnc 4 } g3atmpncTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3atmpnc 5 } g3atmpncTable OBJECT-TYPE SYNTAX SEQUENCE OF G3atmpncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3atmpnc entries." ::= { g3atmpnc 6 } g3atmpncEntry OBJECT-TYPE SYNTAX G3atmpncEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3atmpnc entry containing objects of the g3atmpnc information sent by the switch." INDEX { g3atmpncconnection } ::= { g3atmpncTable 1 } G3atmpncEntry ::= SEQUENCE { g3atmpncconnection INTEGER, g3atmpncPncLocA DisplayString, g3atmpncPncNameA DisplayString, g3atmpncPncAddFmtA DisplayString, g3atmpncPncAFIA DisplayString, g3atmpncPncE164A DisplayString, g3atmpncPncDCIA DisplayString, g3atmpncPncHoDsp1A DisplayString, g3atmpncPncHoDsp2A DisplayString, g3atmpncPncESIA DisplayString, g3atmpncPncSELA DisplayString, g3atmpncPncLocB DisplayString, g3atmpncPncNameB DisplayString, g3atmpncPncAddFmtB DisplayString, g3atmpncPncAFIB DisplayString, g3atmpncPncE164B DisplayString, g3atmpncPncDCIB DisplayString, g3atmpncPncHoDsp1B DisplayString, g3atmpncPncHoDsp2B DisplayString, g3atmpncPncESIB DisplayString, g3atmpncPncSELB DisplayString } g3atmpncconnection OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered ATM PNC connection." ::= { g3atmpncEntry 1 } g3atmpncPncLocA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the ATM PNC location A port network location (exp 02A24)." ::= { g3atmpncEntry 2 } g3atmpncPncNameA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the name of the ATM PNC location A name (15 alphanumeric characters)." ::= { g3atmpncEntry 3 } g3atmpncPncAddFmtA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the address format of the ATM PNC location A (DCC ATM, E.164 ATM Private, or ICD ATM)." ::= { g3atmpncEntry 4 } g3atmpncPncAFIA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the AFI value of the ATM PNC location A AFI field (39 for DCC, 45 for E.164 ATM Private, or 47 for ICD ATM)." ::= { g3atmpncEntry 5 } g3atmpncPncE164A OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location A E.164 field (16 hexidecimal digits)." ::= { g3atmpncEntry 6 } g3atmpncPncDCIA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location A DCC/ICD field (4 hexidecimal digits)." ::= { g3atmpncEntry 7 } g3atmpncPncHoDsp1A OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location A HO-DSP1 field (8 hexidecimal digits)." ::= { g3atmpncEntry 8 } g3atmpncPncHoDsp2A OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location A HO-DSP2 field (20 hexidecimal digits)." ::= { g3atmpncEntry 9 } g3atmpncPncESIA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location A ESI field (12 hexidecimal digits)." ::= { g3atmpncEntry 10 } g3atmpncPncSELA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location A SEL field (2 hexidecimal digits)." ::= { g3atmpncEntry 11 } g3atmpncPncLocB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the ATM PNC location B port network location (exp 03A24)." ::= { g3atmpncEntry 12 } g3atmpncPncNameB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the name of the ATM PNC location B name (15 alphanumeric characters)." ::= { g3atmpncEntry 13 } g3atmpncPncAddFmtB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the address format of the ATM PNC location B (DCC ATM, E.164 ATM Private, or ICD ATM)." ::= { g3atmpncEntry 14 } g3atmpncPncAFIB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the AFI value of the ATM PNC location B AFI field (39 for DCC, 45 for E.164 ATM Private, or 47 for ICD ATM)." ::= { g3atmpncEntry 15 } g3atmpncPncE164B OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location B E.164 field (16 hexidecimal digits)." ::= { g3atmpncEntry 16 } g3atmpncPncDCIB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location B DCC/ICD field (4 hexidecimal digits)." ::= { g3atmpncEntry 17 } g3atmpncPncHoDsp1B OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location B HO-DSP1 field (8 hexidecimal digits)." ::= { g3atmpncEntry 18 } g3atmpncPncHoDsp2B OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location B HO-DSP2 field (20 hexidecimal digits)." ::= { g3atmpncEntry 19 } g3atmpncPncESIB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location B ESI field (12 hexidecimal digits)." ::= { g3atmpncEntry 20 } g3atmpncPncSELB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An DisplayString Object that contains the hexidecimal value of the ATM PNC location B SEL field (2 hexidecimal digits)." ::= { g3atmpncEntry 21 } -- the g3pnchealth group g3pnchealthTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the pnc health data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3pnchealthTintvl object allows the Network Manager to determine the validity of the pnc health data in the cache and to control when the proxy agent extracts the pnc health data from the switch." ::= { g3pnchealth 1 } g3pnchealthTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the pnc health data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for pnc health objects is received by the agent it uses the g3pnchealthTage and g3pnchealthTintvl objects to determine whether it should refresh the cached pnchealthTable. If g3pnchealthTstmp + g3pnchealthTintvl is less than the current value of the sysUpTime object then the agent refreshes the pnchealthTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pnchealth 2 } g3pnchealthTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3pnchealth 3 } g3pnchealthTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pnchealth 4 } g3pnchealthSoftwreLck OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Software Locked status (yes or no)." ::= { g3pnchealth 5 } g3pnchealthStandbyBusd OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Standby Busied status (yes or no)." ::= { g3pnchealth 6 } g3pnchealthStndbyRfsh OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Standby Refresh status (yes or no)." ::= { g3pnchealth 7 } g3pnchealthIntchDisble OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Interchange Disable status (yes or no)." ::= { g3pnchealth 8 } g3pnchealthPncAMode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current mode of PNC A." ::= { g3pnchealth 9 } g3pnchealthPncBMode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current mode of PNC B." ::= { g3pnchealth 10 } g3pnchealthPncAHealth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current state of health of PNC A." ::= { g3pnchealth 11 } g3pnchealthPncBHealth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current state of health of PNC B." ::= { g3pnchealth 12 } g3pnchealthPncAIntrIdx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current PN Interchange Index for PNC A." ::= { g3pnchealth 13 } g3pnchealthPncBIntrIdx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current PN Interchange Index for PNC B." ::= { g3pnchealth 14 } g3pnchealthPncAMajor OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged major alarms for PNC A." ::= { g3pnchealth 15 } g3pnchealthPncBMajor OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged major alarms for PNC B." ::= { g3pnchealth 16 } g3pnchealthPncAMinor OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged minor alarms for PNC A." ::= { g3pnchealth 17 } g3pnchealthPncBMinor OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged minor alarms for PNC B." ::= { g3pnchealth 18 } g3pnchealthPncAWarning OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged warning alarms for PNC A." ::= { g3pnchealth 19 } g3pnchealthPncBWarning OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of logged warning alarms for PNC B." ::= { g3pnchealth 20 } g3pnchealthPncASNIntrIdx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current SN Interchange Index for PNC A." ::= { g3pnchealth 21 } g3pnchealthPncBSNIntrIdx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the current SN Interchange Index for PNC B." ::= { g3pnchealth 22 } -- the g3siggroup group g3siggroupTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the signaling group data was extracted from the switch by the G3 Proxy Agent. This object along with the g3siggroupTintvl object allows the Network Manager to determine the validity of the signaling group data in the cache and to control when the proxy agent extracts the signaling group data from the switch." ::= { g3siggroup 1 } g3siggroupTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the signaling group data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for signaling group data objects is received by the agent it uses the g3siggroupTage and g3siggroupTintvl objects to determine whether it should refresh the cached siggroupTable. If g3siggroupTstmp + g3siggroupTintvl is less than the current value of the sysUpTime object then the agent refreshes the siggroupTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3siggroup 2 } g3siggroupTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3siggroup 3 } g3siggroupTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3siggroup 4 } g3siggroupTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3siggroup 5 } g3siggroupTable OBJECT-TYPE SYNTAX SEQUENCE OF G3siggroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3siggroup entries." ::= { g3siggroup 6 } g3siggroupEntry OBJECT-TYPE SYNTAX G3siggroupEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3siggroup entry containing objects of the g3siggroup information sent by the switch." INDEX { g3siggroupGrpNbr } ::= { g3siggroupTable 1 } G3siggroupEntry ::= SEQUENCE { g3siggroupGrpNbr INTEGER, g3siggroupPriDChannel DisplayString, g3siggroupSecDChannel DisplayString, g3siggroupBoard1 DisplayString, g3siggroupBoard2 DisplayString, g3siggroupBoard3 DisplayString, g3siggroupBoard4 DisplayString, g3siggroupBoard5 DisplayString, g3siggroupBoard6 DisplayString, g3siggroupBoard7 DisplayString, g3siggroupBoard8 DisplayString, g3siggroupBoard9 DisplayString, g3siggroupBoard10 DisplayString, g3siggroupBoard11 DisplayString, g3siggroupBoard12 DisplayString, g3siggroupBoard13 DisplayString, g3siggroupBoard14 DisplayString, g3siggroupBoard15 DisplayString, g3siggroupBoard16 DisplayString, g3siggroupBoard17 DisplayString, g3siggroupBoard18 DisplayString, g3siggroupBoard19 DisplayString, g3siggroupBoard20 DisplayString, g3siggroupIntfNum1 INTEGER, g3siggroupIntfNum2 INTEGER, g3siggroupIntfNum3 INTEGER, g3siggroupIntfNum4 INTEGER, g3siggroupIntfNum5 INTEGER, g3siggroupIntfNum6 INTEGER, g3siggroupIntfNum7 INTEGER, g3siggroupIntfNum8 INTEGER, g3siggroupIntfNum9 INTEGER, g3siggroupIntfNum10 INTEGER, g3siggroupIntfNum11 INTEGER, g3siggroupIntfNum12 INTEGER, g3siggroupIntfNum13 INTEGER, g3siggroupIntfNum14 INTEGER, g3siggroupIntfNum15 INTEGER, g3siggroupIntfNum16 INTEGER, g3siggroupIntfNum17 INTEGER, g3siggroupIntfNum18 INTEGER, g3siggroupIntfNum19 INTEGER, g3siggroupIntfNum20 INTEGER, g3siggroupAsocSignal DisplayString } g3siggroupGrpNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered Signaling Group." ::= { g3siggroupEntry 1 } g3siggroupPriDChannel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Primary D channel adminstered for this Signaling Group. The syntax for the Primary D Channel is as follows: cabinet(01-44):carrier(A-E):slot(01-20) port(01-32)." ::= { g3siggroupEntry 2 } g3siggroupSecDChannel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Secondary D channel adminstered for this Signaling Group. The syntax for the Secondary D Channel is as follows: cabinet(01-44):carrier(A-E): slot(01-20):port(01-32)." ::= { g3siggroupEntry 3 } g3siggroupBoard1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3siggroupEntry 4 } g3siggroupBoard2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 5 } g3siggroupBoard3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 6 } g3siggroupBoard4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 7 } g3siggroupBoard5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 8 } g3siggroupBoard6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 9 } g3siggroupBoard7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 10 } g3siggroupBoard8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 11 } g3siggroupBoard9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 12 } g3siggroupBoard10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 13 } g3siggroupBoard11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 14 } g3siggroupBoard12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 15 } g3siggroupBoard13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 16 } g3siggroupBoard14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 17 } g3siggroupBoard15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 18 } g3siggroupBoard16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 19 } g3siggroupBoard17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 20 } g3siggroupBoard18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 21 } g3siggroupBoard19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 22 } g3siggroupBoard20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupBoard1." ::= { g3siggroupEntry 23 } g3siggroupIntfNum1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the Signaling Group Interface Number using this board." ::= { g3siggroupEntry 24 } g3siggroupIntfNum2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 25 } g3siggroupIntfNum3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 26 } g3siggroupIntfNum4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 27 } g3siggroupIntfNum5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 28 } g3siggroupIntfNum6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 29 } g3siggroupIntfNum7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 30 } g3siggroupIntfNum8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 31 } g3siggroupIntfNum9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 32 } g3siggroupIntfNum10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 33 } g3siggroupIntfNum11 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 34 } g3siggroupIntfNum12 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 35 } g3siggroupIntfNum13 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 36 } g3siggroupIntfNum14 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 37 } g3siggroupIntfNum15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 38 } g3siggroupIntfNum16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 39 } g3siggroupIntfNum17 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 40 } g3siggroupIntfNum18 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 41 } g3siggroupIntfNum19 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 42 } g3siggroupIntfNum20 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3siggroupIntfNum1." ::= { g3siggroupEntry 43 } g3siggroupAsocSignal OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Associated Signaling status (y or n)." ::= { g3siggroupEntry 44 } -- the g3restart group g3restartTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the system restart data was extracted from the switch by the G3 Proxy Agent. This object along with the g3restartTintvl object allows the Network Manager to determine the validity of the system restart data in the cache and to control when the proxy agent extracts the system restart data from the switch." ::= { g3restart 1 } g3restartTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the system restart data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for system restart data objects is received by the agent it uses the g3restartTage and g3restartTintvl objects to determine whether it should refresh the cached restartTable. If g3restartTstmp + g3restartTintvl is less than the current value of the sysUpTime object then the agent refreshes the restartTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3restart 2 } g3restartTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3restart 3 } g3restartTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3restart 4 } g3restartTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3restart 5 } g3restartTable OBJECT-TYPE SYNTAX SEQUENCE OF G3restartEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3restart entries." ::= { g3restart 6 } g3restartEntry OBJECT-TYPE SYNTAX G3restartEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3restart entry containing objects of the g3restart information sent by the switch." INDEX { g3restartMonth, g3restartDay, g3restartHour, g3restartMinute, g3restartIndex } ::= { g3restartTable 1 } G3restartEntry ::= SEQUENCE { g3restartMonth INTEGER, g3restartDay INTEGER, g3restartHour INTEGER, g3restartMinute INTEGER, g3restartDateTime DisplayString, g3restartLevel DisplayString, g3restartCarrier DisplayString, g3restartCraftDemand DisplayString, g3restartEscalated DisplayString, g3restartInterchange DisplayString, g3restartUnavailable DisplayString, g3restartCause DisplayString, g3restartIndex INTEGER } g3restartMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the Month (01-12) in which a system restart occurred." ::= { g3restartEntry 1 } g3restartDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the Day (01-31) in which a system restart occurred." ::= { g3restartEntry 2 } g3restartHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the Hour (00-23) in which a system restart occurred." ::= { g3restartEntry 3 } g3restartMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the Minute (00-59) in which a system restart occurred." ::= { g3restartEntry 4 } g3restartDateTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the date and time (of the form MM/DD HH:MM) in which a system restart occurred." ::= { g3restartEntry 5 } g3restartLevel OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the level of the restart (WARM, COLD1, COLD2, REBOOT, or XREBOOT)." ::= { g3restartEntry 6 } g3restartCarrier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the carrier (A or B) on which the restart occurred." ::= { g3restartEntry 7 } g3restartCraftDemand OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing a flag (Y or N) indicating whether or not the restart was craft demanded." ::= { g3restartEntry 8 } g3restartEscalated OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing a flag (Y or N) indicating whether or not the restart was escalated." ::= { g3restartEntry 9 } g3restartInterchange OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing a flag (Y or N) indicating whether or not an interchange took place." ::= { g3restartEntry 10 } g3restartUnavailable OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the amount of time (of the form HH:MM:SS) the system was unavailable due to the restart." ::= { g3restartEntry 11 } g3restartCause OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the cause of the system restart." ::= { g3restartEntry 12 } g3restartIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that provides a secondary key for multiple restarts occurring in the same minute." ::= { g3restartEntry 13 } -- the g3fiberlink group g3fiberlinkTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the fiberlink data was extracted from the switch by the G3 Proxy Agent. This object along with the g3fiberlinkTintvl object allows the Network Manager to determine the validity of the fiberlink data in the cache and to control when the proxy agent extracts the fiberlink data from the switch." ::= { g3fiberlink 1 } g3fiberlinkTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the fiberlink data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for fiberlink data objects is received by the agent it uses the g3fiberlinkTage and g3fiberlinkTintvl objects to determine whether it should refresh the cached fiberlinkTable. If g3fiberlinkTstmp + g3fiberlinkTintvl is less than the current value of the sysUpTime object then the agent refreshes the fiberlinkTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3fiberlink 2 } g3fiberlinkTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3fiberlink 3 } g3fiberlinkTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3fiberlink 4 } g3fiberlinkTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3fiberlink 5 } g3fiberlinkTable OBJECT-TYPE SYNTAX SEQUENCE OF G3fiberlinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3fiberlink entries." ::= { g3fiberlink 6 } g3fiberlinkEntry OBJECT-TYPE SYNTAX G3fiberlinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3fiberlink entry containing objects of the g3fiberlink information sent by the switch." INDEX { g3fiberlinkFLNumber } ::= { g3fiberlinkTable 1 } G3fiberlinkEntry ::= SEQUENCE { g3fiberlinkFLNumber INTEGER, g3fiberlinkDS1Type DisplayString, g3fiberlinkE1Type DisplayString, g3fiberlinkE2Type DisplayString, g3fiberlinkE1ABoard DisplayString, g3fiberlinkE2ABoard DisplayString, g3fiberlinkE1BBoard DisplayString, g3fiberlinkE2BBoard DisplayString, g3fiberlinkE1ADs1Board DisplayString, g3fiberlinkE2ADs1Board DisplayString, g3fiberlinkE1BDs1Board DisplayString, g3fiberlinkE2BDs1Board DisplayString } g3fiberlinkFLNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered Fiber Link." ::= { g3fiberlinkEntry 1 } g3fiberlinkDS1Type OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that identifies the type of DS1 Converter board used if a DS1 converter is used (TNXXXX)." ::= { g3fiberlinkEntry 2 } g3fiberlinkE1Type OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that identifies the type of the Endpoint for Endpoint 1 (sni or ei)." ::= { g3fiberlinkEntry 3 } g3fiberlinkE2Type OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that identifies the type of the Endpoint for Endpoint 1 (sni or ei)." ::= { g3fiberlinkEntry 4 } g3fiberlinkE1ABoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 1 A-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 5 } g3fiberlinkE2ABoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 2 A-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 6 } g3fiberlinkE1BBoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 1 B-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 7 } g3fiberlinkE2BBoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 2 B-PNC SNI or EI board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 8 } g3fiberlinkE1ADs1Board OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 1 A-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 9 } g3fiberlinkE2ADs1Board OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 2 A-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 10 } g3fiberlinkE1BDs1Board OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 1 B-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 11 } g3fiberlinkE2BDs1Board OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the Endpoint 2 B-PNC DS1 board based on its location in the system. The syntax for the Board Location is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3fiberlinkEntry 12 } -- the g3routepattern group g3routepatternTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the routepattern data was extracted from the switch by the G3 Proxy Agent. This object along with the g3routepatternTintvl object allows the Network Manager to determine the validity of the routepattern data in the cache and to control when the proxy agent extracts the routepattern data from the switch." ::= { g3routepattern 1 } g3routepatternTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the routepattern data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for routepattern data objects is received by the agent it uses the g3routepatternTage and g3routepatternTintvl objects to determine whether it should refresh the cached routepatternTable. If g3routepatternTstmp + g3routepatternTintvl is less than the current value of the sysUpTime object then the agent refreshes the routepatternTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3routepattern 2 } g3routepatternTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3routepattern 3 } g3routepatternTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3routepattern 4 } g3routepatternTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3routepattern 5 } g3routepatternTable OBJECT-TYPE SYNTAX SEQUENCE OF G3routepatternEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3routepattern entries." ::= { g3routepattern 6 } g3routepatternEntry OBJECT-TYPE SYNTAX G3routepatternEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3routepattern entry containing objects of the g3routepattern information sent by the switch." INDEX { g3routepatternRPNumber } ::= { g3routepatternTable 1 } G3routepatternEntry ::= SEQUENCE { g3routepatternRPNumber INTEGER, g3routepatternTGNumber1 INTEGER, g3routepatternTGNumber2 INTEGER, g3routepatternTGNumber3 INTEGER, g3routepatternTGNumber4 INTEGER, g3routepatternTGNumber5 INTEGER, g3routepatternTGNumber6 INTEGER, g3routepatternTGNumber7 INTEGER, g3routepatternTGNumber8 INTEGER, g3routepatternTGNumber9 INTEGER, g3routepatternTGNumber10 INTEGER, g3routepatternTGNumber11 INTEGER, g3routepatternTGNumber12 INTEGER, g3routepatternTGNumber13 INTEGER, g3routepatternTGNumber14 INTEGER, g3routepatternTGNumber15 INTEGER, g3routepatternTGNumber16 INTEGER } g3routepatternRPNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered Route Pattern." ::= { g3routepatternEntry 1 } g3routepatternTGNumber1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 1." ::= { g3routepatternEntry 2 } g3routepatternTGNumber2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 2." ::= { g3routepatternEntry 3 } g3routepatternTGNumber3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 3." ::= { g3routepatternEntry 4 } g3routepatternTGNumber4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 4." ::= { g3routepatternEntry 5 } g3routepatternTGNumber5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 5." ::= { g3routepatternEntry 6 } g3routepatternTGNumber6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 6." ::= { g3routepatternEntry 7 } g3routepatternTGNumber7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 7." ::= { g3routepatternEntry 8 } g3routepatternTGNumber8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 8." ::= { g3routepatternEntry 9 } g3routepatternTGNumber9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 9." ::= { g3routepatternEntry 10 } g3routepatternTGNumber10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 10." ::= { g3routepatternEntry 11 } g3routepatternTGNumber11 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 11." ::= { g3routepatternEntry 12 } g3routepatternTGNumber12 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 12." ::= { g3routepatternEntry 13 } g3routepatternTGNumber13 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 13." ::= { g3routepatternEntry 14 } g3routepatternTGNumber14 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 14." ::= { g3routepatternEntry 15 } g3routepatternTGNumber15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 15." ::= { g3routepatternEntry 16 } g3routepatternTGNumber16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with group number 16." ::= { g3routepatternEntry 17 } -- the g3trunkcfg group g3trunkcfgTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the trunk config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3trunkcfgTintvl object allows the Network Manager to determine the validity of the trunk config data in the cache and to control when the proxy agent extracts the trunk config data from the switch." ::= { g3trunkcfg 1 } g3trunkcfgTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the trunk config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for trunk config data objects is received by the agent it uses the g3trunkcfgTage and g3trunkcfgTintvl objects to determine whether it should refresh the cached trunkcfgTable. If g3trunkcfgTstmp + g3trunkcfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3trunkcfg 2 } g3trunkcfgTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3trunkcfg 3 } g3trunkcfgTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3trunkcfg 4 } g3trunkcfgTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3trunkcfg 5 } g3trunkcfgTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunkcfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunkcfg entries." ::= { g3trunkcfg 6 } g3trunkcfgEntry OBJECT-TYPE SYNTAX G3trunkcfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunkcfg entry containing objects of the g3trunkcfg information sent by the switch." INDEX { g3trunkcfgBoardNum } ::= { g3trunkcfgTable 1 } G3trunkcfgEntry ::= SEQUENCE { g3trunkcfgBoardNum DisplayString, g3trunkcfgBoardType DisplayString, g3trunkcfgCode DisplayString, g3trunkcfgVintage DisplayString, g3trunkcfgSuffix DisplayString } g3trunkcfgBoardNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3trunkcfgEntry 1 } g3trunkcfgBoardType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains a text description of the type of trunk board." ::= { g3trunkcfgEntry 2 } g3trunkcfgCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the code that defines the type of trunk board." ::= { g3trunkcfgEntry 3 } g3trunkcfgVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the vintage of the trunk board." ::= { g3trunkcfgEntry 4 } g3trunkcfgSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the suffix to the code" ::= { g3trunkcfgEntry 5 } -- the g3stationcfg group g3stationcfgTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the station config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3stationcfgTintvl object allows the Network Manager to determine the validity of the station config data in the cache and to control when the proxy agent extracts the station config data from the switch." ::= { g3stationcfg 1 } g3stationcfgTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the station config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for station config data objects is received by the agent it uses the g3stationcfgTage and g3stationcfgTintvl objects to determine whether it should refresh the cached stationcfgTable. If g3stationcfgTstmp + g3stationcfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the stationcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3stationcfg 2 } g3stationcfgTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3stationcfg 3 } g3stationcfgTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3stationcfg 4 } g3stationcfgTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3stationcfg 5 } g3stationcfgTable OBJECT-TYPE SYNTAX SEQUENCE OF G3stationcfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3stationcfg entries." ::= { g3stationcfg 6 } g3stationcfgEntry OBJECT-TYPE SYNTAX G3stationcfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3stationcfg entry containing objects of the g3stationcfg information sent by the switch." INDEX { g3stationcfgBoardNum } ::= { g3stationcfgTable 1 } G3stationcfgEntry ::= SEQUENCE { g3stationcfgBoardNum DisplayString, g3stationcfgBoardType DisplayString, g3stationcfgCode DisplayString, g3stationcfgVintage DisplayString, g3stationcfgSuffix DisplayString } g3stationcfgBoardNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a station board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3stationcfgEntry 1 } g3stationcfgBoardType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains a text description of the type of station board." ::= { g3stationcfgEntry 2 } g3stationcfgCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the code that defines the type of station board." ::= { g3stationcfgEntry 3 } g3stationcfgVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the vintage of the station board." ::= { g3stationcfgEntry 4 } g3stationcfgSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the suffix to the code" ::= { g3stationcfgEntry 5 } -- the g3atmcfg group g3atmcfgTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the atm config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmcfgTintvl object allows the Network Manager to determine the validity of the atm config data in the cache and to control when the proxy agent extracts the atm config data from the switch." ::= { g3atmcfg 1 } g3atmcfgTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the atm config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm config data objects is received by the agent it uses the g3atmcfgTage and g3atmcfgTintvl objects to determine whether it should refresh the cached atmcfgTable. If g3atmcfgTstmp + g3atmcfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the atmcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3atmcfg 2 } g3atmcfgTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3atmcfg 3 } g3atmcfgTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3atmcfg 4 } g3atmcfgTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3atmcfg 5 } g3atmcfgTable OBJECT-TYPE SYNTAX SEQUENCE OF G3atmcfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3atmcfg entries." ::= { g3atmcfg 6 } g3atmcfgEntry OBJECT-TYPE SYNTAX G3atmcfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3atmcfg entry containing objects of the g3atmcfg information sent by the switch." INDEX { g3atmcfgBoardNum } ::= { g3atmcfgTable 1 } G3atmcfgEntry ::= SEQUENCE { g3atmcfgBoardNum DisplayString, g3atmcfgCode DisplayString, g3atmcfgBoardType DisplayString, g3atmcfgVintage DisplayString, g3atmcfgName DisplayString, g3atmcfgSuffix DisplayString } g3atmcfgBoardNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a board used for ATM connectivity based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3atmcfgEntry 1 } g3atmcfgCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the code that defines the type of ATM connectivity board." ::= { g3atmcfgEntry 2 } g3atmcfgBoardType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains a text description of the type of ATM connectivity board." ::= { g3atmcfgEntry 3 } g3atmcfgVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the vintage of the ATM connectivity board." ::= { g3atmcfgEntry 4 } g3atmcfgName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the name of the ATM connectivity board." ::= { g3atmcfgEntry 5 } g3atmcfgSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the suffix to the code" ::= { g3atmcfgEntry 6 } -- the g3aca group g3acaTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3acaintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3aca 1 } g3acaTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3acaage and g3acaintvl objects to determine whether it should refresh the cached acaTable. If g3acastmp + g3acaintvl is less than the current value of the sysUpTime object then the agent refreshes the acaTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3aca 2 } g3acaTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3aca 3 } g3acaTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3aca 4 } g3acaTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3aca 5 } g3acaTable OBJECT-TYPE SYNTAX SEQUENCE OF G3acaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3aca entries." ::= { g3aca 6 } g3acaEntry OBJECT-TYPE SYNTAX G3acaEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3aca entry containing objects of the g3aca information sent by the switch." INDEX { g3acaTGNumber, g3acaTGMember, g3acaDayTime } ::= { g3acaTable 1 } G3acaEntry ::= SEQUENCE { g3acaTGNumber INTEGER, g3acaTGMember INTEGER, g3acaDayTime DisplayString, g3acaYear INTEGER, g3acaMonth INTEGER, g3acaDay INTEGER, g3acaHour INTEGER, g3acaTGAccess INTEGER, g3acaRefType DisplayString, g3acaWideBand DisplayString } g3acaTGNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number." ::= { g3acaEntry 1 } g3acaTGMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group member number." ::= { g3acaEntry 2 } g3acaDayTime OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the day and time at which either the threshold for short holding time calls was exceeded or long holding time call was reached and a referral call was placed." ::= { g3acaEntry 3 } g3acaYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3acaEntry 4 } g3acaMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3acaEntry 5 } g3acaDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3acaEntry 6 } g3acaHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3acaEntry 7 } g3acaTGAccess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk access code for the trunk group." ::= { g3acaEntry 8 } g3acaRefType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether the referral occurred as the result of too many short holding time calls or an excessively long holding time call." ::= { g3acaEntry 9 } g3acaWideBand OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether the call was a wideband call." ::= { g3acaEntry 10 } -- the g3atmtrunk group g3atmtrunkTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the atm trunk data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmtrunkTintvl object allows the Network Manager to determine the validity of the atm trunk data in the cache and to control when the proxy agent extracts the atm trunk data from the switch." ::= { g3atmtrunk 1 } g3atmtrunkTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the atm trunk data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm trunk data objects is received by the agent it uses the g3atmtrunkTage and g3atmtrunkTintvl objects to determine whether it should refresh the cached atmtrunkTable. If g3atmtrunkTstmp + g3atmtrunkTintvl is less than the current value of the sysUpTime object then the agent refreshes the atmtrunkTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3atmtrunk 2 } g3atmtrunkTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3atmtrunk 3 } g3atmtrunkTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3atmtrunk 4 } g3atmtrunkTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3atmtrunk 5 } g3atmtrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF G3atmtrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3atmtrunk entries." ::= { g3atmtrunk 6 } g3atmtrunkEntry OBJECT-TYPE SYNTAX G3atmtrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3atmtrunk entry containing objects of the g3atmtrunk information sent by the switch." INDEX { g3atmtrunkLocation } ::= { g3atmtrunkTable 1 } G3atmtrunkEntry ::= SEQUENCE { g3atmtrunkLocation DisplayString, g3atmtrunkName DisplayString, g3atmtrunkSynch DisplayString } g3atmtrunkLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3atmtrunkEntry 1 } g3atmtrunkName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that identifies the ATM trunk board by name." ::= { g3atmtrunkEntry 2 } g3atmtrunkSynch OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that identifies whether the ATM trunk is synchronization capable (y or n)." ::= { g3atmtrunkEntry 3 } -- the g3atmportpg1 group g3atmportpg1Tage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg1Tintvl object allows the Network Manager to determine the validity of the atm port data in the cache and to control when the proxy agent extracts the atm port data from the switch." ::= { g3atmportpg1 1 } g3atmportpg1Tintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm port data objects is received by the agent it uses the g3atmportpg1sTage and g3atmportpg1sTintvl objects to determine whether it should refresh the cached atmportpg1sTable. If g3atmportpg1sTstmp + g3atmportpg1sTintvl is less than the current value of the sysUpTime object then the agent refreshes the atmportpg1sTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3atmportpg1 2 } g3atmportpg1Tdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3atmportpg1 3 } g3atmportpg1Tretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3atmportpg1 4 } g3atmportpg1Tcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3atmportpg1 5 } g3atmportpg1Table OBJECT-TYPE SYNTAX SEQUENCE OF G3atmportpg1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3atmportpg1 entries." ::= { g3atmportpg1 6 } g3atmportpg1Entry OBJECT-TYPE SYNTAX G3atmportpg1Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3atmportpg1 entry containing objects of the g3atmportpg1 information sent by the switch." INDEX { g3atmportpg1Location } ::= { g3atmportpg1Table 1 } G3atmportpg1Entry ::= SEQUENCE { g3atmportpg1Location DisplayString, g3atmportpg1SGNumber1 INTEGER, g3atmportpg1SGNumber2 INTEGER, g3atmportpg1SGNumber3 INTEGER, g3atmportpg1SGNumber4 INTEGER, g3atmportpg1SGNumber5 INTEGER, g3atmportpg1SGNumber6 INTEGER, g3atmportpg1SGNumber7 INTEGER, g3atmportpg1SGNumber8 INTEGER, g3atmportpg1SGNumber9 INTEGER, g3atmportpg1SGNumber10 INTEGER, g3atmportpg1SGNumber11 INTEGER, g3atmportpg1SGNumber12 INTEGER, g3atmportpg1SGNumber13 INTEGER, g3atmportpg1SGNumber14 INTEGER, g3atmportpg1SGNumber15 INTEGER, g3atmportpg1SGNumber16 INTEGER, g3atmportpg1SGNumber17 INTEGER, g3atmportpg1SGNumber18 INTEGER, g3atmportpg1SGNumber19 INTEGER, g3atmportpg1SGNumber20 INTEGER, g3atmportpg1SGNumber21 INTEGER, g3atmportpg1SGNumber22 INTEGER, g3atmportpg1SGNumber23 INTEGER, g3atmportpg1SGNumber24 INTEGER, g3atmportpg1SGNumber25 INTEGER, g3atmportpg1SGNumber26 INTEGER, g3atmportpg1SGNumber27 INTEGER, g3atmportpg1SGNumber28 INTEGER, g3atmportpg1SGNumber29 INTEGER, g3atmportpg1SGNumber30 INTEGER, g3atmportpg1SGNumber31 INTEGER, g3atmportpg1SGNumber32 INTEGER, g3atmportpg1SGNumber33 INTEGER, g3atmportpg1SGNumber34 INTEGER, g3atmportpg1SGNumber35 INTEGER, g3atmportpg1SGNumber36 INTEGER, g3atmportpg1SGNumber37 INTEGER, g3atmportpg1SGNumber38 INTEGER, g3atmportpg1SGNumber39 INTEGER, g3atmportpg1SGNumber40 INTEGER, g3atmportpg1SGNumber41 INTEGER, g3atmportpg1SGNumber42 INTEGER, g3atmportpg1SGNumber43 INTEGER, g3atmportpg1SGNumber44 INTEGER, g3atmportpg1SGNumber45 INTEGER, g3atmportpg1SGNumber46 INTEGER, g3atmportpg1SGNumber47 INTEGER, g3atmportpg1SGNumber48 INTEGER, g3atmportpg1SGNumber49 INTEGER, g3atmportpg1SGNumber50 INTEGER, g3atmportpg1SGNumber51 INTEGER, g3atmportpg1SGNumber52 INTEGER, g3atmportpg1SGNumber53 INTEGER, g3atmportpg1SGNumber54 INTEGER, g3atmportpg1SGNumber55 INTEGER, g3atmportpg1SGNumber56 INTEGER, g3atmportpg1SGNumber57 INTEGER, g3atmportpg1SGNumber58 INTEGER, g3atmportpg1SGNumber59 INTEGER, g3atmportpg1SGNumber60 INTEGER, g3atmportpg1SGNumber61 INTEGER, g3atmportpg1SGNumber62 INTEGER, g3atmportpg1SGNumber63 INTEGER, g3atmportpg1SGNumber64 INTEGER, g3atmportpg1SGNumber65 INTEGER, g3atmportpg1SGNumber66 INTEGER, g3atmportpg1SGNumber67 INTEGER, g3atmportpg1SGNumber68 INTEGER, g3atmportpg1SGNumber69 INTEGER, g3atmportpg1SGNumber70 INTEGER, g3atmportpg1SGNumber71 INTEGER, g3atmportpg1SGNumber72 INTEGER, g3atmportpg1SGNumber73 INTEGER, g3atmportpg1SGNumber74 INTEGER, g3atmportpg1SGNumber75 INTEGER, g3atmportpg1SGNumber76 INTEGER, g3atmportpg1SGNumber77 INTEGER, g3atmportpg1SGNumber78 INTEGER, g3atmportpg1SGNumber79 INTEGER, g3atmportpg1SGNumber80 INTEGER, g3atmportpg1SGNumber81 INTEGER, g3atmportpg1SGNumber82 INTEGER, g3atmportpg1SGNumber83 INTEGER, g3atmportpg1SGNumber84 INTEGER, g3atmportpg1SGNumber85 INTEGER, g3atmportpg1SGNumber86 INTEGER, g3atmportpg1SGNumber87 INTEGER, g3atmportpg1SGNumber88 INTEGER, g3atmportpg1SGNumber89 INTEGER, g3atmportpg1SGNumber90 INTEGER, g3atmportpg1TGNumber1 INTEGER, g3atmportpg1TGNumber2 INTEGER, g3atmportpg1TGNumber3 INTEGER, g3atmportpg1TGNumber4 INTEGER, g3atmportpg1TGNumber5 INTEGER, g3atmportpg1TGNumber6 INTEGER, g3atmportpg1TGNumber7 INTEGER, g3atmportpg1TGNumber8 INTEGER, g3atmportpg1TGNumber9 INTEGER, g3atmportpg1TGNumber10 INTEGER, g3atmportpg1TGNumber11 INTEGER, g3atmportpg1TGNumber12 INTEGER, g3atmportpg1TGNumber13 INTEGER, g3atmportpg1TGNumber14 INTEGER, g3atmportpg1TGNumber15 INTEGER, g3atmportpg1TGNumber16 INTEGER, g3atmportpg1TGNumber17 INTEGER, g3atmportpg1TGNumber18 INTEGER, g3atmportpg1TGNumber19 INTEGER, g3atmportpg1TGNumber20 INTEGER, g3atmportpg1TGNumber21 INTEGER, g3atmportpg1TGNumber22 INTEGER, g3atmportpg1TGNumber23 INTEGER, g3atmportpg1TGNumber24 INTEGER, g3atmportpg1TGNumber25 INTEGER, g3atmportpg1TGNumber26 INTEGER, g3atmportpg1TGNumber27 INTEGER, g3atmportpg1TGNumber28 INTEGER, g3atmportpg1TGNumber29 INTEGER, g3atmportpg1TGNumber30 INTEGER, g3atmportpg1TGNumber31 INTEGER, g3atmportpg1TGNumber32 INTEGER, g3atmportpg1TGNumber33 INTEGER, g3atmportpg1TGNumber34 INTEGER, g3atmportpg1TGNumber35 INTEGER, g3atmportpg1TGNumber36 INTEGER, g3atmportpg1TGNumber37 INTEGER, g3atmportpg1TGNumber38 INTEGER, g3atmportpg1TGNumber39 INTEGER, g3atmportpg1TGNumber40 INTEGER, g3atmportpg1TGNumber41 INTEGER, g3atmportpg1TGNumber42 INTEGER, g3atmportpg1TGNumber43 INTEGER, g3atmportpg1TGNumber44 INTEGER, g3atmportpg1TGNumber45 INTEGER, g3atmportpg1TGNumber46 INTEGER, g3atmportpg1TGNumber47 INTEGER, g3atmportpg1TGNumber48 INTEGER, g3atmportpg1TGNumber49 INTEGER, g3atmportpg1TGNumber50 INTEGER, g3atmportpg1TGNumber51 INTEGER, g3atmportpg1TGNumber52 INTEGER, g3atmportpg1TGNumber53 INTEGER, g3atmportpg1TGNumber54 INTEGER, g3atmportpg1TGNumber55 INTEGER, g3atmportpg1TGNumber56 INTEGER, g3atmportpg1TGNumber57 INTEGER, g3atmportpg1TGNumber58 INTEGER, g3atmportpg1TGNumber59 INTEGER, g3atmportpg1TGNumber60 INTEGER, g3atmportpg1TGNumber61 INTEGER, g3atmportpg1TGNumber62 INTEGER, g3atmportpg1TGNumber63 INTEGER, g3atmportpg1TGNumber64 INTEGER, g3atmportpg1TGNumber65 INTEGER, g3atmportpg1TGNumber66 INTEGER, g3atmportpg1TGNumber67 INTEGER, g3atmportpg1TGNumber68 INTEGER, g3atmportpg1TGNumber69 INTEGER, g3atmportpg1TGNumber70 INTEGER, g3atmportpg1TGNumber71 INTEGER, g3atmportpg1TGNumber72 INTEGER, g3atmportpg1TGNumber73 INTEGER, g3atmportpg1TGNumber74 INTEGER, g3atmportpg1TGNumber75 INTEGER, g3atmportpg1TGNumber76 INTEGER, g3atmportpg1TGNumber77 INTEGER, g3atmportpg1TGNumber78 INTEGER, g3atmportpg1TGNumber79 INTEGER, g3atmportpg1TGNumber80 INTEGER, g3atmportpg1TGNumber81 INTEGER, g3atmportpg1TGNumber82 INTEGER, g3atmportpg1TGNumber83 INTEGER, g3atmportpg1TGNumber84 INTEGER, g3atmportpg1TGNumber85 INTEGER, g3atmportpg1TGNumber86 INTEGER, g3atmportpg1TGNumber87 INTEGER, g3atmportpg1TGNumber88 INTEGER, g3atmportpg1TGNumber89 INTEGER, g3atmportpg1TGNumber90 INTEGER } g3atmportpg1Location OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3atmportpg1Entry 1 } g3atmportpg1SGNumber1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (1 to 90) on page 1 of the form." ::= { g3atmportpg1Entry 2 } g3atmportpg1SGNumber2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 3 } g3atmportpg1SGNumber3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 4 } g3atmportpg1SGNumber4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 5 } g3atmportpg1SGNumber5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 6 } g3atmportpg1SGNumber6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 7 } g3atmportpg1SGNumber7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 8 } g3atmportpg1SGNumber8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 9 } g3atmportpg1SGNumber9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 10 } g3atmportpg1SGNumber10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 11 } g3atmportpg1SGNumber11 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 12 } g3atmportpg1SGNumber12 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 13 } g3atmportpg1SGNumber13 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 14 } g3atmportpg1SGNumber14 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 15 } g3atmportpg1SGNumber15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 16 } g3atmportpg1SGNumber16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 17 } g3atmportpg1SGNumber17 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 18 } g3atmportpg1SGNumber18 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 19 } g3atmportpg1SGNumber19 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 20 } g3atmportpg1SGNumber20 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 21 } g3atmportpg1SGNumber21 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 22 } g3atmportpg1SGNumber22 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 23 } g3atmportpg1SGNumber23 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 24 } g3atmportpg1SGNumber24 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 25 } g3atmportpg1SGNumber25 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 26 } g3atmportpg1SGNumber26 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 27 } g3atmportpg1SGNumber27 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 28 } g3atmportpg1SGNumber28 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 29 } g3atmportpg1SGNumber29 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 30 } g3atmportpg1SGNumber30 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 31 } g3atmportpg1SGNumber31 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 32 } g3atmportpg1SGNumber32 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 33 } g3atmportpg1SGNumber33 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 34 } g3atmportpg1SGNumber34 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 35 } g3atmportpg1SGNumber35 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 36 } g3atmportpg1SGNumber36 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 37 } g3atmportpg1SGNumber37 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 38 } g3atmportpg1SGNumber38 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 39 } g3atmportpg1SGNumber39 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 40 } g3atmportpg1SGNumber40 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 41 } g3atmportpg1SGNumber41 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 42 } g3atmportpg1SGNumber42 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 43 } g3atmportpg1SGNumber43 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 44 } g3atmportpg1SGNumber44 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 45 } g3atmportpg1SGNumber45 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 46 } g3atmportpg1SGNumber46 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 47 } g3atmportpg1SGNumber47 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 48 } g3atmportpg1SGNumber48 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 49 } g3atmportpg1SGNumber49 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 50 } g3atmportpg1SGNumber50 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 51 } g3atmportpg1SGNumber51 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 52 } g3atmportpg1SGNumber52 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 53 } g3atmportpg1SGNumber53 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 54 } g3atmportpg1SGNumber54 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 55 } g3atmportpg1SGNumber55 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 56 } g3atmportpg1SGNumber56 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 57 } g3atmportpg1SGNumber57 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 58 } g3atmportpg1SGNumber58 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 59 } g3atmportpg1SGNumber59 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 60 } g3atmportpg1SGNumber60 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 61 } g3atmportpg1SGNumber61 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 62 } g3atmportpg1SGNumber62 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 63 } g3atmportpg1SGNumber63 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 64 } g3atmportpg1SGNumber64 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 65 } g3atmportpg1SGNumber65 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 66 } g3atmportpg1SGNumber66 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 67 } g3atmportpg1SGNumber67 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 68 } g3atmportpg1SGNumber68 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 69 } g3atmportpg1SGNumber69 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 70 } g3atmportpg1SGNumber70 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 71 } g3atmportpg1SGNumber71 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 72 } g3atmportpg1SGNumber72 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 73 } g3atmportpg1SGNumber73 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 74 } g3atmportpg1SGNumber74 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 75 } g3atmportpg1SGNumber75 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 76 } g3atmportpg1SGNumber76 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 77 } g3atmportpg1SGNumber77 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 78 } g3atmportpg1SGNumber78 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 79 } g3atmportpg1SGNumber79 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 80 } g3atmportpg1SGNumber80 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 81 } g3atmportpg1SGNumber81 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 82 } g3atmportpg1SGNumber82 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 83 } g3atmportpg1SGNumber83 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 84 } g3atmportpg1SGNumber84 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 85 } g3atmportpg1SGNumber85 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 86 } g3atmportpg1SGNumber86 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 87 } g3atmportpg1SGNumber87 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 88 } g3atmportpg1SGNumber88 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 89 } g3atmportpg1SGNumber89 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 90 } g3atmportpg1SGNumber90 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1SGNumber1." ::= { g3atmportpg1Entry 91 } g3atmportpg1TGNumber1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (1 to 90) on page 1 of the form." ::= { g3atmportpg1Entry 92 } g3atmportpg1TGNumber2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 93 } g3atmportpg1TGNumber3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 94 } g3atmportpg1TGNumber4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 95 } g3atmportpg1TGNumber5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 96 } g3atmportpg1TGNumber6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 97 } g3atmportpg1TGNumber7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 98 } g3atmportpg1TGNumber8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 99 } g3atmportpg1TGNumber9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 100 } g3atmportpg1TGNumber10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 101 } g3atmportpg1TGNumber11 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 102 } g3atmportpg1TGNumber12 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 103 } g3atmportpg1TGNumber13 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 104 } g3atmportpg1TGNumber14 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 105 } g3atmportpg1TGNumber15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 106 } g3atmportpg1TGNumber16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 107 } g3atmportpg1TGNumber17 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 108 } g3atmportpg1TGNumber18 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 109 } g3atmportpg1TGNumber19 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 110 } g3atmportpg1TGNumber20 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 111 } g3atmportpg1TGNumber21 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 112 } g3atmportpg1TGNumber22 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 113 } g3atmportpg1TGNumber23 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 114 } g3atmportpg1TGNumber24 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 115 } g3atmportpg1TGNumber25 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 116 } g3atmportpg1TGNumber26 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 117 } g3atmportpg1TGNumber27 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 118 } g3atmportpg1TGNumber28 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 119 } g3atmportpg1TGNumber29 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 120 } g3atmportpg1TGNumber30 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 121 } g3atmportpg1TGNumber31 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 122 } g3atmportpg1TGNumber32 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 123 } g3atmportpg1TGNumber33 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 124 } g3atmportpg1TGNumber34 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 125 } g3atmportpg1TGNumber35 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 126 } g3atmportpg1TGNumber36 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 127 } g3atmportpg1TGNumber37 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 128 } g3atmportpg1TGNumber38 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 129 } g3atmportpg1TGNumber39 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 130 } g3atmportpg1TGNumber40 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 131 } g3atmportpg1TGNumber41 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 132 } g3atmportpg1TGNumber42 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 133 } g3atmportpg1TGNumber43 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 134 } g3atmportpg1TGNumber44 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 135 } g3atmportpg1TGNumber45 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 136 } g3atmportpg1TGNumber46 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 137 } g3atmportpg1TGNumber47 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 138 } g3atmportpg1TGNumber48 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 139 } g3atmportpg1TGNumber49 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 140 } g3atmportpg1TGNumber50 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 141 } g3atmportpg1TGNumber51 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 142 } g3atmportpg1TGNumber52 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 143 } g3atmportpg1TGNumber53 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 144 } g3atmportpg1TGNumber54 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 145 } g3atmportpg1TGNumber55 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 146 } g3atmportpg1TGNumber56 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 147 } g3atmportpg1TGNumber57 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 148 } g3atmportpg1TGNumber58 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 149 } g3atmportpg1TGNumber59 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 150 } g3atmportpg1TGNumber60 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 151 } g3atmportpg1TGNumber61 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 152 } g3atmportpg1TGNumber62 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 153 } g3atmportpg1TGNumber63 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 154 } g3atmportpg1TGNumber64 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 155 } g3atmportpg1TGNumber65 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 156 } g3atmportpg1TGNumber66 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 157 } g3atmportpg1TGNumber67 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 158 } g3atmportpg1TGNumber68 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 159 } g3atmportpg1TGNumber69 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 160 } g3atmportpg1TGNumber70 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 161 } g3atmportpg1TGNumber71 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 162 } g3atmportpg1TGNumber72 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 163 } g3atmportpg1TGNumber73 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 164 } g3atmportpg1TGNumber74 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 165 } g3atmportpg1TGNumber75 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 166 } g3atmportpg1TGNumber76 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 167 } g3atmportpg1TGNumber77 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 168 } g3atmportpg1TGNumber78 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 169 } g3atmportpg1TGNumber79 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 170 } g3atmportpg1TGNumber80 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 171 } g3atmportpg1TGNumber81 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 172 } g3atmportpg1TGNumber82 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 173 } g3atmportpg1TGNumber83 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 174 } g3atmportpg1TGNumber84 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 175 } g3atmportpg1TGNumber85 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 176 } g3atmportpg1TGNumber86 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 177 } g3atmportpg1TGNumber87 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 178 } g3atmportpg1TGNumber88 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 179 } g3atmportpg1TGNumber89 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 180 } g3atmportpg1TGNumber90 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg1TGNumber1." ::= { g3atmportpg1Entry 181 } -- the g3atmportpg2 group g3atmportpg2Tage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg2Tintvl object allows the Network Manager to determine the validity of the atm port data in the cache and to control when the proxy agent extracts the atm port data from the switch." ::= { g3atmportpg2 1 } g3atmportpg2Tintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm port data objects is received by the agent it Uses the g3atmportpg2Tage and g3atmportpg2Tintvl objects to determine whether it should refresh the cached atmportpg2Table. If g3atmportpg2Tstmp + g3atmportpg2Tintvl is less than the current value of the sysUpTime object then the agent refreshes the atmportpg2Table cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3atmportpg2 2 } g3atmportpg2Tdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3atmportpg2 3 } g3atmportpg2Tretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3atmportpg2 4 } g3atmportpg2Tcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3atmportpg2 5 } g3atmportpg2Table OBJECT-TYPE SYNTAX SEQUENCE OF G3atmportpg2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3atmportpg2 entries." ::= { g3atmportpg2 6 } g3atmportpg2Entry OBJECT-TYPE SYNTAX G3atmportpg2Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3atmportpg2 entry containing objects of the g3atmportpg2 information sent by the switch." INDEX { g3atmportpg2Location } ::= { g3atmportpg2Table 1 } G3atmportpg2Entry ::= SEQUENCE { g3atmportpg2Location DisplayString, g3atmportpg2SGNumber91 INTEGER, g3atmportpg2SGNumber92 INTEGER, g3atmportpg2SGNumber93 INTEGER, g3atmportpg2SGNumber94 INTEGER, g3atmportpg2SGNumber95 INTEGER, g3atmportpg2SGNumber96 INTEGER, g3atmportpg2SGNumber97 INTEGER, g3atmportpg2SGNumber98 INTEGER, g3atmportpg2SGNumber99 INTEGER, g3atmportpg2SGNumber100 INTEGER, g3atmportpg2SGNumber101 INTEGER, g3atmportpg2SGNumber102 INTEGER, g3atmportpg2SGNumber103 INTEGER, g3atmportpg2SGNumber104 INTEGER, g3atmportpg2SGNumber105 INTEGER, g3atmportpg2SGNumber106 INTEGER, g3atmportpg2SGNumber107 INTEGER, g3atmportpg2SGNumber108 INTEGER, g3atmportpg2SGNumber109 INTEGER, g3atmportpg2SGNumber110 INTEGER, g3atmportpg2SGNumber111 INTEGER, g3atmportpg2SGNumber112 INTEGER, g3atmportpg2SGNumber113 INTEGER, g3atmportpg2SGNumber114 INTEGER, g3atmportpg2SGNumber115 INTEGER, g3atmportpg2SGNumber116 INTEGER, g3atmportpg2SGNumber117 INTEGER, g3atmportpg2SGNumber118 INTEGER, g3atmportpg2SGNumber119 INTEGER, g3atmportpg2SGNumber120 INTEGER, g3atmportpg2SGNumber121 INTEGER, g3atmportpg2SGNumber122 INTEGER, g3atmportpg2SGNumber123 INTEGER, g3atmportpg2SGNumber124 INTEGER, g3atmportpg2SGNumber125 INTEGER, g3atmportpg2SGNumber126 INTEGER, g3atmportpg2SGNumber127 INTEGER, g3atmportpg2SGNumber128 INTEGER, g3atmportpg2SGNumber129 INTEGER, g3atmportpg2SGNumber130 INTEGER, g3atmportpg2SGNumber131 INTEGER, g3atmportpg2SGNumber132 INTEGER, g3atmportpg2SGNumber133 INTEGER, g3atmportpg2SGNumber134 INTEGER, g3atmportpg2SGNumber135 INTEGER, g3atmportpg2SGNumber136 INTEGER, g3atmportpg2SGNumber137 INTEGER, g3atmportpg2SGNumber138 INTEGER, g3atmportpg2SGNumber139 INTEGER, g3atmportpg2SGNumber140 INTEGER, g3atmportpg2SGNumber141 INTEGER, g3atmportpg2SGNumber142 INTEGER, g3atmportpg2SGNumber143 INTEGER, g3atmportpg2SGNumber144 INTEGER, g3atmportpg2SGNumber145 INTEGER, g3atmportpg2SGNumber146 INTEGER, g3atmportpg2SGNumber147 INTEGER, g3atmportpg2SGNumber148 INTEGER, g3atmportpg2SGNumber149 INTEGER, g3atmportpg2SGNumber150 INTEGER, g3atmportpg2SGNumber151 INTEGER, g3atmportpg2SGNumber152 INTEGER, g3atmportpg2SGNumber153 INTEGER, g3atmportpg2SGNumber154 INTEGER, g3atmportpg2SGNumber155 INTEGER, g3atmportpg2SGNumber156 INTEGER, g3atmportpg2SGNumber157 INTEGER, g3atmportpg2SGNumber158 INTEGER, g3atmportpg2SGNumber159 INTEGER, g3atmportpg2SGNumber160 INTEGER, g3atmportpg2SGNumber161 INTEGER, g3atmportpg2SGNumber162 INTEGER, g3atmportpg2SGNumber163 INTEGER, g3atmportpg2SGNumber164 INTEGER, g3atmportpg2SGNumber165 INTEGER, g3atmportpg2SGNumber166 INTEGER, g3atmportpg2SGNumber167 INTEGER, g3atmportpg2SGNumber168 INTEGER, g3atmportpg2SGNumber169 INTEGER, g3atmportpg2SGNumber170 INTEGER, g3atmportpg2SGNumber171 INTEGER, g3atmportpg2SGNumber172 INTEGER, g3atmportpg2SGNumber173 INTEGER, g3atmportpg2SGNumber174 INTEGER, g3atmportpg2SGNumber175 INTEGER, g3atmportpg2SGNumber176 INTEGER, g3atmportpg2SGNumber177 INTEGER, g3atmportpg2SGNumber178 INTEGER, g3atmportpg2SGNumber179 INTEGER, g3atmportpg2SGNumber180 INTEGER, g3atmportpg2TGNumber91 INTEGER, g3atmportpg2TGNumber92 INTEGER, g3atmportpg2TGNumber93 INTEGER, g3atmportpg2TGNumber94 INTEGER, g3atmportpg2TGNumber95 INTEGER, g3atmportpg2TGNumber96 INTEGER, g3atmportpg2TGNumber97 INTEGER, g3atmportpg2TGNumber98 INTEGER, g3atmportpg2TGNumber99 INTEGER, g3atmportpg2TGNumber100 INTEGER, g3atmportpg2TGNumber101 INTEGER, g3atmportpg2TGNumber102 INTEGER, g3atmportpg2TGNumber103 INTEGER, g3atmportpg2TGNumber104 INTEGER, g3atmportpg2TGNumber105 INTEGER, g3atmportpg2TGNumber106 INTEGER, g3atmportpg2TGNumber107 INTEGER, g3atmportpg2TGNumber108 INTEGER, g3atmportpg2TGNumber109 INTEGER, g3atmportpg2TGNumber110 INTEGER, g3atmportpg2TGNumber111 INTEGER, g3atmportpg2TGNumber112 INTEGER, g3atmportpg2TGNumber113 INTEGER, g3atmportpg2TGNumber114 INTEGER, g3atmportpg2TGNumber115 INTEGER, g3atmportpg2TGNumber116 INTEGER, g3atmportpg2TGNumber117 INTEGER, g3atmportpg2TGNumber118 INTEGER, g3atmportpg2TGNumber119 INTEGER, g3atmportpg2TGNumber120 INTEGER, g3atmportpg2TGNumber121 INTEGER, g3atmportpg2TGNumber122 INTEGER, g3atmportpg2TGNumber123 INTEGER, g3atmportpg2TGNumber124 INTEGER, g3atmportpg2TGNumber125 INTEGER, g3atmportpg2TGNumber126 INTEGER, g3atmportpg2TGNumber127 INTEGER, g3atmportpg2TGNumber128 INTEGER, g3atmportpg2TGNumber129 INTEGER, g3atmportpg2TGNumber130 INTEGER, g3atmportpg2TGNumber131 INTEGER, g3atmportpg2TGNumber132 INTEGER, g3atmportpg2TGNumber133 INTEGER, g3atmportpg2TGNumber134 INTEGER, g3atmportpg2TGNumber135 INTEGER, g3atmportpg2TGNumber136 INTEGER, g3atmportpg2TGNumber137 INTEGER, g3atmportpg2TGNumber138 INTEGER, g3atmportpg2TGNumber139 INTEGER, g3atmportpg2TGNumber140 INTEGER, g3atmportpg2TGNumber141 INTEGER, g3atmportpg2TGNumber142 INTEGER, g3atmportpg2TGNumber143 INTEGER, g3atmportpg2TGNumber144 INTEGER, g3atmportpg2TGNumber145 INTEGER, g3atmportpg2TGNumber146 INTEGER, g3atmportpg2TGNumber147 INTEGER, g3atmportpg2TGNumber148 INTEGER, g3atmportpg2TGNumber149 INTEGER, g3atmportpg2TGNumber150 INTEGER, g3atmportpg2TGNumber151 INTEGER, g3atmportpg2TGNumber152 INTEGER, g3atmportpg2TGNumber153 INTEGER, g3atmportpg2TGNumber154 INTEGER, g3atmportpg2TGNumber155 INTEGER, g3atmportpg2TGNumber156 INTEGER, g3atmportpg2TGNumber157 INTEGER, g3atmportpg2TGNumber158 INTEGER, g3atmportpg2TGNumber159 INTEGER, g3atmportpg2TGNumber160 INTEGER, g3atmportpg2TGNumber161 INTEGER, g3atmportpg2TGNumber162 INTEGER, g3atmportpg2TGNumber163 INTEGER, g3atmportpg2TGNumber164 INTEGER, g3atmportpg2TGNumber165 INTEGER, g3atmportpg2TGNumber166 INTEGER, g3atmportpg2TGNumber167 INTEGER, g3atmportpg2TGNumber168 INTEGER, g3atmportpg2TGNumber169 INTEGER, g3atmportpg2TGNumber170 INTEGER, g3atmportpg2TGNumber171 INTEGER, g3atmportpg2TGNumber172 INTEGER, g3atmportpg2TGNumber173 INTEGER, g3atmportpg2TGNumber174 INTEGER, g3atmportpg2TGNumber175 INTEGER, g3atmportpg2TGNumber176 INTEGER, g3atmportpg2TGNumber177 INTEGER, g3atmportpg2TGNumber178 INTEGER, g3atmportpg2TGNumber179 INTEGER, g3atmportpg2TGNumber180 INTEGER } g3atmportpg2Location OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3atmportpg2Entry 1 } g3atmportpg2SGNumber91 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (91 to 180) on page 2 of the form." ::= { g3atmportpg2Entry 2 } g3atmportpg2SGNumber92 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 3 } g3atmportpg2SGNumber93 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 4 } g3atmportpg2SGNumber94 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 5 } g3atmportpg2SGNumber95 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 6 } g3atmportpg2SGNumber96 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 7 } g3atmportpg2SGNumber97 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 8 } g3atmportpg2SGNumber98 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 9 } g3atmportpg2SGNumber99 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 10 } g3atmportpg2SGNumber100 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 11 } g3atmportpg2SGNumber101 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 12 } g3atmportpg2SGNumber102 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 13 } g3atmportpg2SGNumber103 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 14 } g3atmportpg2SGNumber104 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 15 } g3atmportpg2SGNumber105 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 16 } g3atmportpg2SGNumber106 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 17 } g3atmportpg2SGNumber107 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 18 } g3atmportpg2SGNumber108 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 19 } g3atmportpg2SGNumber109 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 20 } g3atmportpg2SGNumber110 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 21 } g3atmportpg2SGNumber111 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 22 } g3atmportpg2SGNumber112 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 23 } g3atmportpg2SGNumber113 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 24 } g3atmportpg2SGNumber114 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 25 } g3atmportpg2SGNumber115 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 26 } g3atmportpg2SGNumber116 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 27 } g3atmportpg2SGNumber117 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 28 } g3atmportpg2SGNumber118 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 29 } g3atmportpg2SGNumber119 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 30 } g3atmportpg2SGNumber120 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 31 } g3atmportpg2SGNumber121 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 32 } g3atmportpg2SGNumber122 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 33 } g3atmportpg2SGNumber123 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 34 } g3atmportpg2SGNumber124 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 35 } g3atmportpg2SGNumber125 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 36 } g3atmportpg2SGNumber126 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 37 } g3atmportpg2SGNumber127 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 38 } g3atmportpg2SGNumber128 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 39 } g3atmportpg2SGNumber129 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 40 } g3atmportpg2SGNumber130 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 41 } g3atmportpg2SGNumber131 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 42 } g3atmportpg2SGNumber132 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 43 } g3atmportpg2SGNumber133 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 44 } g3atmportpg2SGNumber134 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 45 } g3atmportpg2SGNumber135 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 46 } g3atmportpg2SGNumber136 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 47 } g3atmportpg2SGNumber137 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 48 } g3atmportpg2SGNumber138 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 49 } g3atmportpg2SGNumber139 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 50 } g3atmportpg2SGNumber140 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 51 } g3atmportpg2SGNumber141 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 52 } g3atmportpg2SGNumber142 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 53 } g3atmportpg2SGNumber143 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 54 } g3atmportpg2SGNumber144 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 55 } g3atmportpg2SGNumber145 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 56 } g3atmportpg2SGNumber146 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 57 } g3atmportpg2SGNumber147 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 58 } g3atmportpg2SGNumber148 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 59 } g3atmportpg2SGNumber149 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 60 } g3atmportpg2SGNumber150 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 61 } g3atmportpg2SGNumber151 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 62 } g3atmportpg2SGNumber152 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 63 } g3atmportpg2SGNumber153 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 64 } g3atmportpg2SGNumber154 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 65 } g3atmportpg2SGNumber155 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 66 } g3atmportpg2SGNumber156 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 67 } g3atmportpg2SGNumber157 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 68 } g3atmportpg2SGNumber158 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 69 } g3atmportpg2SGNumber159 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 70 } g3atmportpg2SGNumber160 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 71 } g3atmportpg2SGNumber161 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 72 } g3atmportpg2SGNumber162 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 73 } g3atmportpg2SGNumber163 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 74 } g3atmportpg2SGNumber164 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 75 } g3atmportpg2SGNumber165 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 76 } g3atmportpg2SGNumber166 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 77 } g3atmportpg2SGNumber167 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 78 } g3atmportpg2SGNumber168 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 79 } g3atmportpg2SGNumber169 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 80 } g3atmportpg2SGNumber170 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 81 } g3atmportpg2SGNumber171 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 82 } g3atmportpg2SGNumber172 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 83 } g3atmportpg2SGNumber173 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 84 } g3atmportpg2SGNumber174 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 85 } g3atmportpg2SGNumber175 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 86 } g3atmportpg2SGNumber176 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 87 } g3atmportpg2SGNumber177 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 88 } g3atmportpg2SGNumber178 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 89 } g3atmportpg2SGNumber179 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 90 } g3atmportpg2SGNumber180 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2SGNumber91." ::= { g3atmportpg2Entry 91 } g3atmportpg2TGNumber91 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (91 to 180) on page 2 of the form." ::= { g3atmportpg2Entry 92 } g3atmportpg2TGNumber92 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 93 } g3atmportpg2TGNumber93 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 94 } g3atmportpg2TGNumber94 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 95 } g3atmportpg2TGNumber95 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 96 } g3atmportpg2TGNumber96 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 97 } g3atmportpg2TGNumber97 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 98 } g3atmportpg2TGNumber98 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 99 } g3atmportpg2TGNumber99 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 100 } g3atmportpg2TGNumber100 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 101 } g3atmportpg2TGNumber101 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 102 } g3atmportpg2TGNumber102 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 103 } g3atmportpg2TGNumber103 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 104 } g3atmportpg2TGNumber104 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 105 } g3atmportpg2TGNumber105 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 106 } g3atmportpg2TGNumber106 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 107 } g3atmportpg2TGNumber107 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 108 } g3atmportpg2TGNumber108 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 109 } g3atmportpg2TGNumber109 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 110 } g3atmportpg2TGNumber110 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 111 } g3atmportpg2TGNumber111 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 112 } g3atmportpg2TGNumber112 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 113 } g3atmportpg2TGNumber113 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 114 } g3atmportpg2TGNumber114 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 115 } g3atmportpg2TGNumber115 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 116 } g3atmportpg2TGNumber116 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 117 } g3atmportpg2TGNumber117 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 118 } g3atmportpg2TGNumber118 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 119 } g3atmportpg2TGNumber119 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 120 } g3atmportpg2TGNumber120 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 121 } g3atmportpg2TGNumber121 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 122 } g3atmportpg2TGNumber122 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 123 } g3atmportpg2TGNumber123 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 124 } g3atmportpg2TGNumber124 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 125 } g3atmportpg2TGNumber125 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 126 } g3atmportpg2TGNumber126 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 127 } g3atmportpg2TGNumber127 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 128 } g3atmportpg2TGNumber128 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 129 } g3atmportpg2TGNumber129 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 130 } g3atmportpg2TGNumber130 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 131 } g3atmportpg2TGNumber131 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 132 } g3atmportpg2TGNumber132 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 133 } g3atmportpg2TGNumber133 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 134 } g3atmportpg2TGNumber134 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 135 } g3atmportpg2TGNumber135 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 136 } g3atmportpg2TGNumber136 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 137 } g3atmportpg2TGNumber137 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 138 } g3atmportpg2TGNumber138 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 139 } g3atmportpg2TGNumber139 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 140 } g3atmportpg2TGNumber140 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 141 } g3atmportpg2TGNumber141 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 142 } g3atmportpg2TGNumber142 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 143 } g3atmportpg2TGNumber143 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 144 } g3atmportpg2TGNumber144 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 145 } g3atmportpg2TGNumber145 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 146 } g3atmportpg2TGNumber146 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 147 } g3atmportpg2TGNumber147 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 148 } g3atmportpg2TGNumber148 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 149 } g3atmportpg2TGNumber149 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 150 } g3atmportpg2TGNumber150 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 151 } g3atmportpg2TGNumber151 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 152 } g3atmportpg2TGNumber152 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 153 } g3atmportpg2TGNumber153 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 154 } g3atmportpg2TGNumber154 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 155 } g3atmportpg2TGNumber155 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 156 } g3atmportpg2TGNumber156 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 157 } g3atmportpg2TGNumber157 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 158 } g3atmportpg2TGNumber158 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 159 } g3atmportpg2TGNumber159 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 160 } g3atmportpg2TGNumber160 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 161 } g3atmportpg2TGNumber161 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 162 } g3atmportpg2TGNumber162 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 163 } g3atmportpg2TGNumber163 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 164 } g3atmportpg2TGNumber164 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 165 } g3atmportpg2TGNumber165 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 166 } g3atmportpg2TGNumber166 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 167 } g3atmportpg2TGNumber167 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 168 } g3atmportpg2TGNumber168 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 169 } g3atmportpg2TGNumber169 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 170 } g3atmportpg2TGNumber170 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 171 } g3atmportpg2TGNumber171 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 172 } g3atmportpg2TGNumber172 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 173 } g3atmportpg2TGNumber173 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 174 } g3atmportpg2TGNumber174 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 175 } g3atmportpg2TGNumber175 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 176 } g3atmportpg2TGNumber176 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 177 } g3atmportpg2TGNumber177 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 178 } g3atmportpg2TGNumber178 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 179 } g3atmportpg2TGNumber179 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 180 } g3atmportpg2TGNumber180 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg2TGNumber91." ::= { g3atmportpg2Entry 181 } -- the g3atmportpg3 group g3atmportpg3Tage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the atm port data was extracted from the switch by the G3 Proxy Agent. This object along with the g3atmportpg3Tintvl object allows the Network Manager to determine the validity of the atm port data in the cache and to control when the proxy agent extracts the atm port data from the switch." ::= { g3atmportpg3 1 } g3atmportpg3Tintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the atm port data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for atm port data objects is received by the agent it uses the g3atmportpg3Tage and g3atmportpg3Tintvl objects to determine whether it should refresh the cached atmportpg3Table. If g3atmportpg3Tstmp + g3atmportpg3Tintvl is less than the current value of the sysUpTime object then the agent refreshes the atmportpg3Table cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3atmportpg3 2 } g3atmportpg3Tdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3atmportpg3 3 } g3atmportpg3Tretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3atmportpg3 4 } g3atmportpg3Tcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3atmportpg3 5 } g3atmportpg3Table OBJECT-TYPE SYNTAX SEQUENCE OF G3atmportpg3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3atmportpg3 entries." ::= { g3atmportpg3 6 } g3atmportpg3Entry OBJECT-TYPE SYNTAX G3atmportpg3Entry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3atmportpg3 entry containing objects of the g3atmportpg3 information sent by the switch." INDEX { g3atmportpg3Location } ::= { g3atmportpg3Table 1 } G3atmportpg3Entry ::= SEQUENCE { g3atmportpg3Location DisplayString, g3atmportpg3SGNumber181 INTEGER, g3atmportpg3SGNumber182 INTEGER, g3atmportpg3SGNumber183 INTEGER, g3atmportpg3SGNumber184 INTEGER, g3atmportpg3SGNumber185 INTEGER, g3atmportpg3SGNumber186 INTEGER, g3atmportpg3SGNumber187 INTEGER, g3atmportpg3SGNumber188 INTEGER, g3atmportpg3SGNumber189 INTEGER, g3atmportpg3SGNumber190 INTEGER, g3atmportpg3SGNumber191 INTEGER, g3atmportpg3SGNumber192 INTEGER, g3atmportpg3SGNumber193 INTEGER, g3atmportpg3SGNumber194 INTEGER, g3atmportpg3SGNumber195 INTEGER, g3atmportpg3SGNumber196 INTEGER, g3atmportpg3SGNumber197 INTEGER, g3atmportpg3SGNumber198 INTEGER, g3atmportpg3SGNumber199 INTEGER, g3atmportpg3SGNumber200 INTEGER, g3atmportpg3SGNumber201 INTEGER, g3atmportpg3SGNumber202 INTEGER, g3atmportpg3SGNumber203 INTEGER, g3atmportpg3SGNumber204 INTEGER, g3atmportpg3SGNumber205 INTEGER, g3atmportpg3SGNumber206 INTEGER, g3atmportpg3SGNumber207 INTEGER, g3atmportpg3SGNumber208 INTEGER, g3atmportpg3SGNumber209 INTEGER, g3atmportpg3SGNumber210 INTEGER, g3atmportpg3SGNumber211 INTEGER, g3atmportpg3SGNumber212 INTEGER, g3atmportpg3SGNumber213 INTEGER, g3atmportpg3SGNumber214 INTEGER, g3atmportpg3SGNumber215 INTEGER, g3atmportpg3SGNumber216 INTEGER, g3atmportpg3SGNumber217 INTEGER, g3atmportpg3SGNumber218 INTEGER, g3atmportpg3SGNumber219 INTEGER, g3atmportpg3SGNumber220 INTEGER, g3atmportpg3SGNumber221 INTEGER, g3atmportpg3SGNumber222 INTEGER, g3atmportpg3SGNumber223 INTEGER, g3atmportpg3SGNumber224 INTEGER, g3atmportpg3SGNumber225 INTEGER, g3atmportpg3SGNumber226 INTEGER, g3atmportpg3SGNumber227 INTEGER, g3atmportpg3SGNumber228 INTEGER, g3atmportpg3SGNumber229 INTEGER, g3atmportpg3SGNumber230 INTEGER, g3atmportpg3SGNumber231 INTEGER, g3atmportpg3SGNumber232 INTEGER, g3atmportpg3SGNumber233 INTEGER, g3atmportpg3SGNumber234 INTEGER, g3atmportpg3SGNumber235 INTEGER, g3atmportpg3SGNumber236 INTEGER, g3atmportpg3SGNumber237 INTEGER, g3atmportpg3SGNumber238 INTEGER, g3atmportpg3SGNumber239 INTEGER, g3atmportpg3SGNumber240 INTEGER, g3atmportpg3SGNumber241 INTEGER, g3atmportpg3SGNumber242 INTEGER, g3atmportpg3SGNumber243 INTEGER, g3atmportpg3SGNumber244 INTEGER, g3atmportpg3SGNumber245 INTEGER, g3atmportpg3SGNumber246 INTEGER, g3atmportpg3SGNumber247 INTEGER, g3atmportpg3SGNumber248 INTEGER, g3atmportpg3SGNumber249 INTEGER, g3atmportpg3SGNumber250 INTEGER, g3atmportpg3SGNumber251 INTEGER, g3atmportpg3SGNumber252 INTEGER, g3atmportpg3SGNumber253 INTEGER, g3atmportpg3SGNumber254 INTEGER, g3atmportpg3SGNumber255 INTEGER, g3atmportpg3SGNumber256 INTEGER, g3atmportpg3TGNumber181 INTEGER, g3atmportpg3TGNumber182 INTEGER, g3atmportpg3TGNumber183 INTEGER, g3atmportpg3TGNumber184 INTEGER, g3atmportpg3TGNumber185 INTEGER, g3atmportpg3TGNumber186 INTEGER, g3atmportpg3TGNumber187 INTEGER, g3atmportpg3TGNumber188 INTEGER, g3atmportpg3TGNumber189 INTEGER, g3atmportpg3TGNumber190 INTEGER, g3atmportpg3TGNumber191 INTEGER, g3atmportpg3TGNumber192 INTEGER, g3atmportpg3TGNumber193 INTEGER, g3atmportpg3TGNumber194 INTEGER, g3atmportpg3TGNumber195 INTEGER, g3atmportpg3TGNumber196 INTEGER, g3atmportpg3TGNumber197 INTEGER, g3atmportpg3TGNumber198 INTEGER, g3atmportpg3TGNumber199 INTEGER, g3atmportpg3TGNumber200 INTEGER, g3atmportpg3TGNumber201 INTEGER, g3atmportpg3TGNumber202 INTEGER, g3atmportpg3TGNumber203 INTEGER, g3atmportpg3TGNumber204 INTEGER, g3atmportpg3TGNumber205 INTEGER, g3atmportpg3TGNumber206 INTEGER, g3atmportpg3TGNumber207 INTEGER, g3atmportpg3TGNumber208 INTEGER, g3atmportpg3TGNumber209 INTEGER, g3atmportpg3TGNumber210 INTEGER, g3atmportpg3TGNumber211 INTEGER, g3atmportpg3TGNumber212 INTEGER, g3atmportpg3TGNumber213 INTEGER, g3atmportpg3TGNumber214 INTEGER, g3atmportpg3TGNumber215 INTEGER, g3atmportpg3TGNumber216 INTEGER, g3atmportpg3TGNumber217 INTEGER, g3atmportpg3TGNumber218 INTEGER, g3atmportpg3TGNumber219 INTEGER, g3atmportpg3TGNumber220 INTEGER, g3atmportpg3TGNumber221 INTEGER, g3atmportpg3TGNumber222 INTEGER, g3atmportpg3TGNumber223 INTEGER, g3atmportpg3TGNumber224 INTEGER, g3atmportpg3TGNumber225 INTEGER, g3atmportpg3TGNumber226 INTEGER, g3atmportpg3TGNumber227 INTEGER, g3atmportpg3TGNumber228 INTEGER, g3atmportpg3TGNumber229 INTEGER, g3atmportpg3TGNumber230 INTEGER, g3atmportpg3TGNumber231 INTEGER, g3atmportpg3TGNumber232 INTEGER, g3atmportpg3TGNumber233 INTEGER, g3atmportpg3TGNumber234 INTEGER, g3atmportpg3TGNumber235 INTEGER, g3atmportpg3TGNumber236 INTEGER, g3atmportpg3TGNumber237 INTEGER, g3atmportpg3TGNumber238 INTEGER, g3atmportpg3TGNumber239 INTEGER, g3atmportpg3TGNumber240 INTEGER, g3atmportpg3TGNumber241 INTEGER, g3atmportpg3TGNumber242 INTEGER, g3atmportpg3TGNumber243 INTEGER, g3atmportpg3TGNumber244 INTEGER, g3atmportpg3TGNumber245 INTEGER, g3atmportpg3TGNumber246 INTEGER, g3atmportpg3TGNumber247 INTEGER, g3atmportpg3TGNumber248 INTEGER, g3atmportpg3TGNumber249 INTEGER, g3atmportpg3TGNumber250 INTEGER, g3atmportpg3TGNumber251 INTEGER, g3atmportpg3TGNumber252 INTEGER, g3atmportpg3TGNumber253 INTEGER, g3atmportpg3TGNumber254 INTEGER, g3atmportpg3TGNumber255 INTEGER, g3atmportpg3TGNumber256 INTEGER } g3atmportpg3Location OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the ATM trunk board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3atmportpg3Entry 1 } g3atmportpg3SGNumber181 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with the ATM ports (181 to 244) on page 3 of the form." ::= { g3atmportpg3Entry 2 } g3atmportpg3SGNumber182 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 3 } g3atmportpg3SGNumber183 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 4 } g3atmportpg3SGNumber184 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 5 } g3atmportpg3SGNumber185 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 6 } g3atmportpg3SGNumber186 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 7 } g3atmportpg3SGNumber187 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 8 } g3atmportpg3SGNumber188 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 9 } g3atmportpg3SGNumber189 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 10 } g3atmportpg3SGNumber190 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 11 } g3atmportpg3SGNumber191 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 12 } g3atmportpg3SGNumber192 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 13 } g3atmportpg3SGNumber193 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 14 } g3atmportpg3SGNumber194 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 15 } g3atmportpg3SGNumber195 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 16 } g3atmportpg3SGNumber196 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 17 } g3atmportpg3SGNumber197 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 18 } g3atmportpg3SGNumber198 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 19 } g3atmportpg3SGNumber199 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 20 } g3atmportpg3SGNumber200 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 21 } g3atmportpg3SGNumber201 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 22 } g3atmportpg3SGNumber202 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 23 } g3atmportpg3SGNumber203 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 24 } g3atmportpg3SGNumber204 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 25 } g3atmportpg3SGNumber205 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 26 } g3atmportpg3SGNumber206 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 27 } g3atmportpg3SGNumber207 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 28 } g3atmportpg3SGNumber208 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 29 } g3atmportpg3SGNumber209 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 30 } g3atmportpg3SGNumber210 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 31 } g3atmportpg3SGNumber211 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 32 } g3atmportpg3SGNumber212 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 33 } g3atmportpg3SGNumber213 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 34 } g3atmportpg3SGNumber214 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 35 } g3atmportpg3SGNumber215 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 36 } g3atmportpg3SGNumber216 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 37 } g3atmportpg3SGNumber217 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 38 } g3atmportpg3SGNumber218 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 39 } g3atmportpg3SGNumber219 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 40 } g3atmportpg3SGNumber220 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 41 } g3atmportpg3SGNumber221 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 42 } g3atmportpg3SGNumber222 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 43 } g3atmportpg3SGNumber223 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 44 } g3atmportpg3SGNumber224 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 45 } g3atmportpg3SGNumber225 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 46 } g3atmportpg3SGNumber226 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 47 } g3atmportpg3SGNumber227 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 48 } g3atmportpg3SGNumber228 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 49 } g3atmportpg3SGNumber229 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 50 } g3atmportpg3SGNumber230 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 51 } g3atmportpg3SGNumber231 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 52 } g3atmportpg3SGNumber232 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 53 } g3atmportpg3SGNumber233 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 54 } g3atmportpg3SGNumber234 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 55 } g3atmportpg3SGNumber235 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 56 } g3atmportpg3SGNumber236 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 57 } g3atmportpg3SGNumber237 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 58 } g3atmportpg3SGNumber238 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 59 } g3atmportpg3SGNumber239 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 60 } g3atmportpg3SGNumber240 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 61 } g3atmportpg3SGNumber241 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 62 } g3atmportpg3SGNumber242 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 63 } g3atmportpg3SGNumber243 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 64 } g3atmportpg3SGNumber244 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 65 } g3atmportpg3SGNumber245 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3SGNumber181." ::= { g3atmportpg3Entry 66 } g3atmportpg3SGNumber246 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 246 on page 3 of the form." ::= { g3atmportpg3Entry 67 } g3atmportpg3SGNumber247 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 247 on page 3 of the form." ::= { g3atmportpg3Entry 68 } g3atmportpg3SGNumber248 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 248 on page 3 of the form." ::= { g3atmportpg3Entry 69 } g3atmportpg3SGNumber249 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 249 on page 3 of the form." ::= { g3atmportpg3Entry 70 } g3atmportpg3SGNumber250 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 250 on page 3 of the form." ::= { g3atmportpg3Entry 71 } g3atmportpg3SGNumber251 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 251 on page 3 of the form." ::= { g3atmportpg3Entry 72 } g3atmportpg3SGNumber252 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 252 on page 3 of the form." ::= { g3atmportpg3Entry 73 } g3atmportpg3SGNumber253 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 253 on page 3 of the form." ::= { g3atmportpg3Entry 74 } g3atmportpg3SGNumber254 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 254 on page 3 of the form." ::= { g3atmportpg3Entry 75 } g3atmportpg3SGNumber255 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 255 on page 3 of the form." ::= { g3atmportpg3Entry 76 } g3atmportpg3SGNumber256 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the signaling group associated with ATM port 256 on page 3 of the form." ::= { g3atmportpg3Entry 77 } g3atmportpg3TGNumber181 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM ports (181 to 244) on page 3 of the form." ::= { g3atmportpg3Entry 78 } g3atmportpg3TGNumber182 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 79 } g3atmportpg3TGNumber183 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 80 } g3atmportpg3TGNumber184 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 81 } g3atmportpg3TGNumber185 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 82 } g3atmportpg3TGNumber186 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 83 } g3atmportpg3TGNumber187 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 84 } g3atmportpg3TGNumber188 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 85 } g3atmportpg3TGNumber189 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 86 } g3atmportpg3TGNumber190 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 87 } g3atmportpg3TGNumber191 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 88 } g3atmportpg3TGNumber192 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 89 } g3atmportpg3TGNumber193 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 90 } g3atmportpg3TGNumber194 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 91 } g3atmportpg3TGNumber195 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 92 } g3atmportpg3TGNumber196 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 93 } g3atmportpg3TGNumber197 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 94 } g3atmportpg3TGNumber198 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 95 } g3atmportpg3TGNumber199 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 96 } g3atmportpg3TGNumber200 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 97 } g3atmportpg3TGNumber201 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 98 } g3atmportpg3TGNumber202 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 99 } g3atmportpg3TGNumber203 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 100 } g3atmportpg3TGNumber204 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 101 } g3atmportpg3TGNumber205 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 102 } g3atmportpg3TGNumber206 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 103 } g3atmportpg3TGNumber207 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 104 } g3atmportpg3TGNumber208 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 105 } g3atmportpg3TGNumber209 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 106 } g3atmportpg3TGNumber210 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 107 } g3atmportpg3TGNumber211 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 108 } g3atmportpg3TGNumber212 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 109 } g3atmportpg3TGNumber213 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 110 } g3atmportpg3TGNumber214 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 111 } g3atmportpg3TGNumber215 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 112 } g3atmportpg3TGNumber216 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 113 } g3atmportpg3TGNumber217 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 114 } g3atmportpg3TGNumber218 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 115 } g3atmportpg3TGNumber219 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 116 } g3atmportpg3TGNumber220 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 117 } g3atmportpg3TGNumber221 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 118 } g3atmportpg3TGNumber222 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 119 } g3atmportpg3TGNumber223 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 120 } g3atmportpg3TGNumber224 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 121 } g3atmportpg3TGNumber225 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 122 } g3atmportpg3TGNumber226 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 123 } g3atmportpg3TGNumber227 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 124 } g3atmportpg3TGNumber228 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 125 } g3atmportpg3TGNumber229 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 126 } g3atmportpg3TGNumber230 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 127 } g3atmportpg3TGNumber231 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 128 } g3atmportpg3TGNumber232 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 129 } g3atmportpg3TGNumber233 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 130 } g3atmportpg3TGNumber234 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 131 } g3atmportpg3TGNumber235 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 132 } g3atmportpg3TGNumber236 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 133 } g3atmportpg3TGNumber237 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 134 } g3atmportpg3TGNumber238 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 135 } g3atmportpg3TGNumber239 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 136 } g3atmportpg3TGNumber240 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 137 } g3atmportpg3TGNumber241 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 138 } g3atmportpg3TGNumber242 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 139 } g3atmportpg3TGNumber243 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 140 } g3atmportpg3TGNumber244 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 141 } g3atmportpg3TGNumber245 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3atmportpg3TGNumber181." ::= { g3atmportpg3Entry 142 } g3atmportpg3TGNumber246 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 246 on page 3 of the form." ::= { g3atmportpg3Entry 143 } g3atmportpg3TGNumber247 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 247 on page 3 of the form." ::= { g3atmportpg3Entry 144 } g3atmportpg3TGNumber248 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 248 on page 3 of the form." ::= { g3atmportpg3Entry 145 } g3atmportpg3TGNumber249 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 249 on page 3 of the form." ::= { g3atmportpg3Entry 146 } g3atmportpg3TGNumber250 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 250 on page 3 of the form." ::= { g3atmportpg3Entry 147 } g3atmportpg3TGNumber251 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 251 on page 3 of the form." ::= { g3atmportpg3Entry 148 } g3atmportpg3TGNumber252 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 252 on page 3 of the form." ::= { g3atmportpg3Entry 149 } g3atmportpg3TGNumber253 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 253 on page 3 of the form." ::= { g3atmportpg3Entry 150 } g3atmportpg3TGNumber254 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 254 on page 3 of the form." ::= { g3atmportpg3Entry 151 } g3atmportpg3TGNumber255 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 255 on page 3 of the form." ::= { g3atmportpg3Entry 152 } g3atmportpg3TGNumber256 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies the trunk group associated with the ATM port 256 on page 3 of the form." ::= { g3atmportpg3Entry 153 } -- the g3dmodule group g3dmoduleTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data-module data was last extracted from the switch by the Proxy Agent. This object along with the g3dmoduleintvl object allows the Network Manager to determine the validity of the data-module data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3dmodule 1 } g3dmoduleTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data-module data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data-module data objects is received by the agent it uses the g3dmoduleage and g3dmoduleintvl objects to determine whether it should refresh the cached dmoduleTable. If g3dmodulestmp + g3dmoduleintvl is less than the current value of the sysUpTime object then the agent refreshes the dmoduleTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3dmodule 2 } g3dmoduleTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3dmodule 3 } g3dmoduleTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3dmodule 4 } g3dmoduleTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3dmodule 5 } g3dmoduleTable OBJECT-TYPE SYNTAX SEQUENCE OF G3dmoduleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3dmodule entries." ::= { g3dmodule 6 } g3dmoduleEntry OBJECT-TYPE SYNTAX G3dmoduleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3dmodule entry containing objects of the g3dmodule information sent by the switch." INDEX { g3dmoduleExtension } ::= { g3dmoduleTable 1 } G3dmoduleEntry ::= SEQUENCE { g3dmoduleExtension DisplayString, g3dmoduleType DisplayString, g3dmoduleName DisplayString, g3dmodulePort DisplayString } g3dmoduleExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies an administered data module." ::= { g3dmoduleEntry 1 } g3dmoduleType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the data module type." ::= { g3dmoduleEntry 2 } g3dmoduleName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name assigned to the data module." ::= { g3dmoduleEntry 3 } g3dmodulePort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a data-module port based on its location in the system. The syntax for the Port location is as follows: cabinet(01-44):carrier(A-E):slot(01-20):port(01-32)." ::= { g3dmoduleEntry 4 } -- the g3occsum group g3occsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the occupancy summary data was last extracted from the switch by the Proxy Agent. This object along with the g3occsumintvl object allows the Network Manager to determine the validity of the occupancy summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3occsum 1 } g3occsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the occupancy summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for occupancy summary objects is received by the agent it uses the g3occsumage and g3occsumintvl objects to determine whether it should refresh the cached occsumTable. If g3occsumstmp + g3occsumintvl is less than the current value of the sysUpTime object then the agent refreshes the occsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3occsum 2 } g3occsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3occsum 3 } g3occsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3occsum 4 } g3occsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3occsum 5 } g3occsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3occsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3occsum entries." ::= { g3occsum 6 } g3occsumEntry OBJECT-TYPE SYNTAX G3occsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3occsum entry containing objects of the g3occsum information sent by the switch." INDEX { g3occsumMeasHour } ::= { g3occsumTable 1 } G3occsumEntry ::= SEQUENCE { g3occsumMeasHour INTEGER, g3occsumRunYear INTEGER, g3occsumRunMonth INTEGER, g3occsumRunDay INTEGER, g3occsumRunHour INTEGER, g3occsumPeakHour INTEGER, g3occsumStatOcc INTEGER, g3occsumCPOcc INTEGER, g3occsumSMOcc INTEGER, g3occsumIdleOcc INTEGER, g3occsumTotCall INTEGER, g3occsumTandCall INTEGER, g3occsumTotAtt INTEGER, g3occsumIntcomAtt INTEGER, g3occsumIncAtt INTEGER, g3occsumOutAtt INTEGER, g3occsumPnetAtt INTEGER } g3occsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Peak Hour for occupancy." ::= { g3occsumEntry 1 } g3occsumRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3occsumEntry 2 } g3occsumRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3occsumEntry 3 } g3occsumRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3occsumEntry 4 } g3occsumRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3occsumEntry 5 } g3occsumPeakHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3occsumEntry 6 } g3occsumStatOcc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the processor utilized by static processes." ::= { g3occsumEntry 7 } g3occsumCPOcc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the processor occupancy utilized by Call Processing processes." ::= { g3occsumEntry 8 } g3occsumSMOcc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the processor occupancy utilized by System Management processes." ::= { g3occsumEntry 9 } g3occsumIdleOcc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the processor occupancy that is unused." ::= { g3occsumEntry 10 } g3occsumTotCall OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing total calls connected for the measurement hour." ::= { g3occsumEntry 11 } g3occsumTandCall OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing trunk-to-trunk calls connected for the measurement hour." ::= { g3occsumEntry 12 } g3occsumTotAtt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total calls attempted for the measurement hour." ::= { g3occsumEntry 13 } g3occsumIntcomAtt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of extension-to-extension calls on the same switch and partially completed calls for the measurement hour." ::= { g3occsumEntry 14 } g3occsumIncAtt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of incoming trunk seizures from public network facilities." ::= { g3occsumEntry 15 } g3occsumOutAtt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of outgoing trunk seizures that are made over public network facilities." ::= { g3occsumEntry 16 } g3occsumPnetAtt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of incoming and outgoing seizures that are made over" ::= { g3occsumEntry 17 } -- the g3attdgrp group g3attdgrpTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the attendant group data was last extracted from the switch by the Proxy Agent. This object along with the g3attdgrpintvl object allows the Network Manager to determine the validity of the attendant group data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3attdgrp 1 } g3attdgrpTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the attendant group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for attendant group objects is received by the agent it uses the g3attdgrpage and g3attdgrpintvl objects to determine whether it should refresh the cached attdgrpTable. If g3attdgrpstmp + g3attdgrpintvl is less than the current value of the sysUpTime object then the agent refreshes the attdgrpTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3attdgrp 2 } g3attdgrpTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3attdgrp 3 } g3attdgrpTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3attdgrp 4 } g3attdgrpTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3attdgrp 5 } g3attdgrpTable OBJECT-TYPE SYNTAX SEQUENCE OF G3attdgrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3attdgrp entries." ::= { g3attdgrp 6 } g3attdgrpEntry OBJECT-TYPE SYNTAX G3attdgrpEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3attdgrp entry containing objects of the g3attdgrp information sent by the switch." INDEX { g3attdgrpMeasType } ::= { g3attdgrpTable 1 } G3attdgrpEntry ::= SEQUENCE { g3attdgrpMeasType DisplayString, g3attdgrpMeasHour INTEGER, g3attdgrpRunYear INTEGER, g3attdgrpRunMonth INTEGER, g3attdgrpRunDay INTEGER, g3attdgrpRunHour INTEGER, g3attdgrpGrpSiz INTEGER, g3attdgrpCallsAns INTEGER, g3attdgrpCallsAbnd INTEGER, g3attdgrpCallsQued INTEGER, g3attdgrpCallsHAbd INTEGER, g3attdgrpCallsHeld INTEGER, g3attdgrpTimeAvail INTEGER, g3attdgrpTimeTalk INTEGER, g3attdgrpTimeHeld INTEGER, g3attdgrpTimeAbnd INTEGER, g3attdgrpSpeedAns INTEGER } g3attdgrpMeasType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the measurement type (YEST PEAK, TODAY PEAK, LASTHOUR)." ::= { g3attdgrpEntry 1 } g3attdgrpMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3attdgrpEntry 2 } g3attdgrpRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3attdgrpEntry 3 } g3attdgrpRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3attdgrpEntry 4 } g3attdgrpRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3attdgrpEntry 5 } g3attdgrpRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3attdgrpEntry 6 } g3attdgrpGrpSiz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of attendant positions that are administered for the groups." ::= { g3attdgrpEntry 7 } g3attdgrpCallsAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls answered by all active attendants during the measurement hour." ::= { g3attdgrpEntry 8 } g3attdgrpCallsAbnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that ring an attendant group and drop (hang up) before an attendant answers." ::= { g3attdgrpEntry 9 } g3attdgrpCallsQued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that were placed in the attendant queue (delayed) because no attendants were available." ::= { g3attdgrpEntry 10 } g3attdgrpCallsHAbd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that abandon while the caller is in hold mode." ::= { g3attdgrpEntry 11 } g3attdgrpCallsHeld OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that are answered by the attendant group and then placed on hold." ::= { g3attdgrpEntry 12 } g3attdgrpTimeAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the time during which the pos avail lamp is lit on all attendant consoles, and the attendants are not talking on calls but are available to handle new calls (in CCS)." ::= { g3attdgrpEntry 13 } g3attdgrpTimeTalk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the time that attendants are active or talking on a loop (in CCS)." ::= { g3attdgrpEntry 14 } g3attdgrpTimeHeld OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the time that attendants have calls on hold (in seconds)." ::= { g3attdgrpEntry 15 } g3attdgrpTimeAbnd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average amount of time that calls spend in queue and/or ringing at the console before the caller hangs up (in seconds)." ::= { g3attdgrpEntry 16 } g3attdgrpSpeedAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average elapsed time from when a call terminates at the attendant group to when the call is answered by an attendant (in seconds)." ::= { g3attdgrpEntry 17 } -- the g3attdpos group g3attdposTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the attendant position data was last extracted from the switch by the Proxy Agent. This object along with the g3attdposintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3attdpos 1 } g3attdposTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the attendant position data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for attendant position objects is received by the agent it uses the g3attdposage and g3attdposintvl objects to determine whether it should refresh the cached attdposTable. If g3attdposstmp + g3attdposintvl is less than the current value of the sysUpTime object then the agent refreshes the attdposTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3attdpos 2 } g3attdposTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3attdpos 3 } g3attdposTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3attdpos 4 } g3attdposTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3attdpos 5 } g3attdposTable OBJECT-TYPE SYNTAX SEQUENCE OF G3attdposEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3attdpos entries." ::= { g3attdpos 6 } g3attdposEntry OBJECT-TYPE SYNTAX G3attdposEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3attdpos entry containing objects of the g3attdpos information sent by the switch." INDEX { g3attdposAttdID } ::= { g3attdposTable 1 } G3attdposEntry ::= SEQUENCE { g3attdposAttdID INTEGER, g3attdposYear INTEGER, g3attdposMonth INTEGER, g3attdposDay INTEGER, g3attdposHour INTEGER, g3attdposPeakHour INTEGER, g3attdposPkTimeAvail INTEGER, g3attdposPkTimeTalk INTEGER, g3attdposPkTimeHeld INTEGER, g3attdposPkCallsAns INTEGER, g3attdposLastHour INTEGER, g3attdposTimeAvail INTEGER, g3attdposTimeTalk INTEGER, g3attdposTimeHeld INTEGER, g3attdposCallsAns INTEGER } g3attdposAttdID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing an attendant number to identify which attendant data is being displayed." ::= { g3attdposEntry 1 } g3attdposYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3attdposEntry 2 } g3attdposMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3attdposEntry 3 } g3attdposDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3attdposEntry 4 } g3attdposHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3attdposEntry 5 } g3attdposPeakHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak measurement hour." ::= { g3attdposEntry 6 } g3attdposPkTimeAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time the attendant is availiable to receive calls during the polling interval (in CCS)." ::= { g3attdposEntry 7 } g3attdposPkTimeTalk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time the attendant is active on calls (in CCS)." ::= { g3attdposEntry 8 } g3attdposPkTimeHeld OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time the attendant has calls on hold (in seconds)." ::= { g3attdposEntry 9 } g3attdposPkCallsAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the attendant (in CCS)." ::= { g3attdposEntry 10 } g3attdposLastHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the last measurement hour." ::= { g3attdposEntry 11 } g3attdposTimeAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time the attendant is availiable to receive calls during the polling interval (in CCS)." ::= { g3attdposEntry 12 } g3attdposTimeTalk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time the attendant is active on calls (in CCS)." ::= { g3attdposEntry 13 } g3attdposTimeHeld OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time the attendant has calls on hold (in seconds)." ::= { g3attdposEntry 14 } g3attdposCallsAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the attendant (in CCS)." ::= { g3attdposEntry 15 } -- the g3trunksum group g3trunksumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunksumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3trunksum 1 } g3trunksumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk summary objects is received by the agent it uses the g3trunksumage and g3trunksumintvl objects to determine whether it should refresh the cached trunksumTable. If g3trunksumstmp + g3trunksumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunksumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3trunksum 2 } g3trunksumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3trunksum 3 } g3trunksumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3trunksum 4 } g3trunksumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3trunksum 5 } g3trunksumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunksumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunksum entries." ::= { g3trunksum 6 } g3trunksumEntry OBJECT-TYPE SYNTAX G3trunksumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunksum entry containing objects of the g3trunksum information sent by the switch." INDEX { g3trunksumTrunkGroup } ::= { g3trunksumTable 1 } G3trunksumEntry ::= SEQUENCE { g3trunksumTrunkGroup INTEGER, g3trunksumMeasHour INTEGER, g3trunksumRunYear INTEGER, g3trunksumRunMonth INTEGER, g3trunksumRunDay INTEGER, g3trunksumRunHour INTEGER, g3trunksumGroupSize INTEGER, g3trunksumTotalUsage INTEGER, g3trunksumTotalSeize INTEGER, g3trunksumIncSeize INTEGER, g3trunksumGrpOvfl INTEGER, g3trunksumQueSiz INTEGER, g3trunksumCallQued INTEGER, g3trunksumQueOvf INTEGER, g3trunksumQueAbd INTEGER, g3trunksumOutSrv INTEGER, g3trunksumPercentAtb INTEGER, g3trunksumPercentOutBlk INTEGER } g3trunksumTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number for which data has been collected." ::= { g3trunksumEntry 1 } g3trunksumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3trunksumEntry 2 } g3trunksumRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3trunksumEntry 3 } g3trunksumRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3trunksumEntry 4 } g3trunksumRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3trunksumEntry 5 } g3trunksumRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3trunksumEntry 6 } g3trunksumGroupSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of administered trunks in the trunk group." ::= { g3trunksumEntry 7 } g3trunksumTotalUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time trunks are busy with calls during the measurement period (in CCS)." ::= { g3trunksumEntry 8 } g3trunksumTotalSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times a trunk was seized in the group including false starts, don't answer and busy." ::= { g3trunksumEntry 9 } g3trunksumIncSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of incoming seizures carried on the trunk group." ::= { g3trunksumEntry 10 } g3trunksumGrpOvfl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to a trunk group that are not carried or queued." ::= { g3trunksumEntry 11 } g3trunksumQueSiz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a number (0-100) that identifies the number of slots assigned to the trunk group queue." ::= { g3trunksumEntry 12 } g3trunksumCallQued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that entered the trunk group queue after finding all trunks busy." ::= { g3trunksumEntry 13 } g3trunksumQueOvf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that were not queued because the queue was full." ::= { g3trunksumEntry 14 } g3trunksumQueAbd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that were removed from the queue (i.e., due to queue timeout or user cancel)" ::= { g3trunksumEntry 15 } g3trunksumOutSrv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of trunks in the group that are out of service (maintenance busy)." ::= { g3trunksumEntry 16 } g3trunksumPercentAtb OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time all trunks in the group were simultaneously in use." ::= { g3trunksumEntry 17 } g3trunksumPercentOutBlk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of offered calls that are not carried on the group." ::= { g3trunksumEntry 18 } -- the g3pktrunksum group g3pktrunksumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunksumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pktrunksum 1 } g3pktrunksumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk summary objects is received by the agent it uses the g3trunksumage and g3trunksumintvl objects to determine whether it should refresh the cached trunksumTable. If g3trunksumstmp + g3trunksumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunksumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pktrunksum 2 } g3pktrunksumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pktrunksum 3 } g3pktrunksumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pktrunksum 4 } g3pktrunksumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pktrunksum 5 } g3pktrunksumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pktrunksumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pktrunksum entries." ::= { g3pktrunksum 6 } g3pktrunksumEntry OBJECT-TYPE SYNTAX G3pktrunksumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pktrunksum entry containing objects of the g3pktrunksum information sent by the switch." INDEX { g3pktrunksumTrunkGroup } ::= { g3pktrunksumTable 1 } G3pktrunksumEntry ::= SEQUENCE { g3pktrunksumTrunkGroup INTEGER, g3pktrunksumMeasHour INTEGER, g3pktrunksumRunYear INTEGER, g3pktrunksumRunMonth INTEGER, g3pktrunksumRunDay INTEGER, g3pktrunksumRunHour INTEGER, g3pktrunksumGroupSize INTEGER, g3pktrunksumTotalUsage INTEGER, g3pktrunksumTotalSeize INTEGER, g3pktrunksumIncSeize INTEGER, g3pktrunksumGrpOvfl INTEGER, g3pktrunksumQueSiz INTEGER, g3pktrunksumCallQued INTEGER, g3pktrunksumQueOvf INTEGER, g3pktrunksumQueAbd INTEGER, g3pktrunksumOutSrv INTEGER, g3pktrunksumPercentAtb INTEGER, g3pktrunksumPercentOutBlk INTEGER } g3pktrunksumTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number for which data has been collected." ::= { g3pktrunksumEntry 1 } g3pktrunksumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktrunksumEntry 2 } g3pktrunksumRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pktrunksumEntry 3 } g3pktrunksumRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pktrunksumEntry 4 } g3pktrunksumRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pktrunksumEntry 5 } g3pktrunksumRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pktrunksumEntry 6 } g3pktrunksumGroupSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of administered trunks in the trunk group." ::= { g3pktrunksumEntry 7 } g3pktrunksumTotalUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time trunks are busy with calls during the measurement period (in CCS)." ::= { g3pktrunksumEntry 8 } g3pktrunksumTotalSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times a trunk was seized in the group including false starts, don't answer and busy." ::= { g3pktrunksumEntry 9 } g3pktrunksumIncSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of incoming seizures carried on the trunk group." ::= { g3pktrunksumEntry 10 } g3pktrunksumGrpOvfl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to a trunk group that are not carried or queued." ::= { g3pktrunksumEntry 11 } g3pktrunksumQueSiz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a number (0-100) that identifies the number of slots assigned to the trunk group queue." ::= { g3pktrunksumEntry 12 } g3pktrunksumCallQued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that entered the trunk group queue after finding all trunks busy." ::= { g3pktrunksumEntry 13 } g3pktrunksumQueOvf OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that were not queued because the queue was full." ::= { g3pktrunksumEntry 14 } g3pktrunksumQueAbd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that were removed from the queue (i.e., due to queue timeout or user cancel)" ::= { g3pktrunksumEntry 15 } g3pktrunksumOutSrv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of trunks in the group that are out of service (maintenance busy)." ::= { g3pktrunksumEntry 16 } g3pktrunksumPercentAtb OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time all trunks in the group were simultaneously in use." ::= { g3pktrunksumEntry 17 } g3pktrunksumPercentOutBlk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of offered calls that are not carried on the group." ::= { g3pktrunksumEntry 18 } -- the g3trunkwbsum group g3trunkwbsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the wideband trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkwbsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3trunkwbsum 1 } g3trunkwbsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the wideband trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for wideband trunk summary objects is received by the agent it uses the g3trunkwbsumage and g3trunkwbsumintvl objects to determine whether it should refresh the cached trunkwbsumTable. If g3trunkwbsumstmp + g3trunkwbsumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkwbsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3trunkwbsum 2 } g3trunkwbsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3trunkwbsum 3 } g3trunkwbsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3trunkwbsum 4 } g3trunkwbsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3trunkwbsum 5 } g3trunkwbsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunkwbsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunkwbsum entries." ::= { g3trunkwbsum 6 } g3trunkwbsumEntry OBJECT-TYPE SYNTAX G3trunkwbsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunkwbsum entry containing objects of the g3trunkwbsum information sent by the switch." INDEX { g3trunkwbsumTrunkGroup } ::= { g3trunkwbsumTable 1 } G3trunkwbsumEntry ::= SEQUENCE { g3trunkwbsumTrunkGroup INTEGER, g3trunkwbsumMeasHour INTEGER, g3trunkwbsumYear INTEGER, g3trunkwbsumMonth INTEGER, g3trunkwbsumDay INTEGER, g3trunkwbsumHour INTEGER, g3trunkwbsumTotalUsage INTEGER, g3trunkwbsumTotalSeize INTEGER, g3trunkwbsumIncSeize INTEGER, g3trunkwbsumGrpOvfl INTEGER, g3trunkwbsumOutSrv INTEGER, g3trunkwbsumPercentAtb INTEGER, g3trunkwbsumPercentOutBlk INTEGER } g3trunkwbsumTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number for which data has been collected." ::= { g3trunkwbsumEntry 1 } g3trunkwbsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3trunkwbsumEntry 2 } g3trunkwbsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3trunkwbsumEntry 3 } g3trunkwbsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3trunkwbsumEntry 4 } g3trunkwbsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3trunkwbsumEntry 5 } g3trunkwbsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3trunkwbsumEntry 6 } g3trunkwbsumTotalUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total wideband call usage for all trunks in the trunk group (in CCS)." ::= { g3trunkwbsumEntry 7 } g3trunkwbsumTotalSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband call attempts." ::= { g3trunkwbsumEntry 8 } g3trunkwbsumIncSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband incoming call attempts." ::= { g3trunkwbsumEntry 9 } g3trunkwbsumGrpOvfl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband outgoing calls that were attempted when the remaining trunk group capacity was insufficient to accommodate the call or the trunk group's remaining bandwidth was in the wrong configuration." ::= { g3trunkwbsumEntry 10 } g3trunkwbsumOutSrv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband trunks in the group that are out of service (listed as maintenance busy)." ::= { g3trunkwbsumEntry 11 } g3trunkwbsumPercentAtb OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time that all trunks in the trunk group were simultaneously in use during the measurement interval." ::= { g3trunkwbsumEntry 12 } g3trunkwbsumPercentOutBlk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of offered wideband calls that are not carried on the trunk group." ::= { g3trunkwbsumEntry 13 } -- the g3pktrunkwbsum group g3pktrunkwbsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the wideband trunk summary data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkwbsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pktrunkwbsum 1 } g3pktrunkwbsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the wideband trunk summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for wideband trunk summary objects is received by the agent it uses the g3trunkwbsumage and g3trunkwbsumintvl objects to determine whether it should refresh the cached trunkwbsumTable. If g3trunkwbsumstmp + g3trunkwbsumintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkwbsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pktrunkwbsum 2 } g3pktrunkwbsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pktrunkwbsum 3 } g3pktrunkwbsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pktrunkwbsum 4 } g3pktrunkwbsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pktrunkwbsum 5 } g3pktrunkwbsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pktrunkwbsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pktrunkwbsum entries." ::= { g3pktrunkwbsum 6 } g3pktrunkwbsumEntry OBJECT-TYPE SYNTAX G3pktrunkwbsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pktrunkwbsum entry containing objects of the g3pktrunkwbsum information sent by the switch." INDEX { g3pktrunkwbsumTrunkGroup } ::= { g3pktrunkwbsumTable 1 } G3pktrunkwbsumEntry ::= SEQUENCE { g3pktrunkwbsumTrunkGroup INTEGER, g3pktrunkwbsumMeasHour INTEGER, g3pktrunkwbsumYear INTEGER, g3pktrunkwbsumMonth INTEGER, g3pktrunkwbsumDay INTEGER, g3pktrunkwbsumHour INTEGER, g3pktrunkwbsumTotalUsage INTEGER, g3pktrunkwbsumTotalSeize INTEGER, g3pktrunkwbsumIncSeize INTEGER, g3pktrunkwbsumGrpOvfl INTEGER, g3pktrunkwbsumOutSrv INTEGER, g3pktrunkwbsumPercentAtb INTEGER, g3pktrunkwbsumPercentOutBlk INTEGER } g3pktrunkwbsumTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number for which data has been collected." ::= { g3pktrunkwbsumEntry 1 } g3pktrunkwbsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktrunkwbsumEntry 2 } g3pktrunkwbsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pktrunkwbsumEntry 3 } g3pktrunkwbsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pktrunkwbsumEntry 4 } g3pktrunkwbsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pktrunkwbsumEntry 5 } g3pktrunkwbsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pktrunkwbsumEntry 6 } g3pktrunkwbsumTotalUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total wideband call usage for all trunks in the trunk group (in CCS)." ::= { g3pktrunkwbsumEntry 7 } g3pktrunkwbsumTotalSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband call attempts." ::= { g3pktrunkwbsumEntry 8 } g3pktrunkwbsumIncSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband incoming call attempts." ::= { g3pktrunkwbsumEntry 9 } g3pktrunkwbsumGrpOvfl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband outgoing calls that were attempted when the remaining trunk group capacity was insufficient to accommodate the call or the trunk group's remaining bandwidth was in the wrong configuration." ::= { g3pktrunkwbsumEntry 10 } g3pktrunkwbsumOutSrv OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of wideband trunks in the group that are out of service (listed as maintenance busy)." ::= { g3pktrunkwbsumEntry 11 } g3pktrunkwbsumPercentAtb OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time that all trunks in the trunk group were simultaneously in use during the measurement interval." ::= { g3pktrunkwbsumEntry 12 } g3pktrunkwbsumPercentOutBlk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of offered wideband calls that are not carried on the trunk group." ::= { g3pktrunkwbsumEntry 13 } -- the g3pktrunkout group g3pktrunkoutTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the outage trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3pktrunkoutintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pktrunkout 1 } g3pktrunkoutTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the trunk outage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk outage objects is received by the agent it uses the g3pktrunkoutage and g3pktrunkoutintvl objects to determine whether it should refresh the cached pktrunkoutTable. If g3pktrunkoutstmp + g3pktrunkoutintvl is less than the current value of the sysUpTime object then the agent refreshes the pktrunkoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pktrunkout 2 } g3pktrunkoutTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pktrunkout 3 } g3pktrunkoutTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pktrunkout 4 } g3pktrunkoutTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pktrunkout 5 } g3pktrunkoutTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pktrunkoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pktrunkout entries." ::= { g3pktrunkout 6 } g3pktrunkoutEntry OBJECT-TYPE SYNTAX G3pktrunkoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pktrunkout entry containing objects of the g3pktrunkout information sent by the switch." INDEX { g3pktrunkoutTrunkGroup, g3pktrunkoutMember } ::= { g3pktrunkoutTable 1 } G3pktrunkoutEntry ::= SEQUENCE { g3pktrunkoutTrunkGroup INTEGER, g3pktrunkoutMember INTEGER, g3pktrunkoutYear INTEGER, g3pktrunkoutMonth INTEGER, g3pktrunkoutDay INTEGER, g3pktrunkoutHour INTEGER, g3pktrunkoutOutages INTEGER } g3pktrunkoutTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number." ::= { g3pktrunkoutEntry 1 } g3pktrunkoutMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the group member number." ::= { g3pktrunkoutEntry 2 } g3pktrunkoutYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pktrunkoutEntry 3 } g3pktrunkoutMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pktrunkoutEntry 4 } g3pktrunkoutDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pktrunkoutEntry 5 } g3pktrunkoutHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pktrunkoutEntry 6 } g3pktrunkoutOutages OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times the group member is sampled as out of service over the measurement period." ::= { g3pktrunkoutEntry 7 } -- the g3pktrunklight group g3pktrunklightTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the lightly used trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3pktrunklightintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pktrunklight 1 } g3pktrunklightTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the lightly used trunk data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for lightly used trunk objects is received by the agent it uses the g3pktrunklightage and g3pktrunklightintvl objects to determine whether it should refresh the cached pktrunklightTable. If g3pktrunklightstmp+g3pktrunklightintvl is less than the current value of the sysUpTime object then the agent refreshes the pktrunklightTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pktrunklight 2 } g3pktrunklightTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pktrunklight 3 } g3pktrunklightTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pktrunklight 4 } g3pktrunklightTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pktrunklight 5 } g3pktrunklightTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pktrunklightEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pktrunklight entries." ::= { g3pktrunklight 6 } g3pktrunklightEntry OBJECT-TYPE SYNTAX G3pktrunklightEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pktrunklight entry containing objects of the g3pktrunklight information sent by the switch." INDEX { g3pktrunklightTrunkGroup, g3pktrunklightMember } ::= { g3pktrunklightTable 1 } G3pktrunklightEntry ::= SEQUENCE { g3pktrunklightTrunkGroup INTEGER, g3pktrunklightMember INTEGER, g3pktrunklightYear INTEGER, g3pktrunklightMonth INTEGER, g3pktrunklightDay INTEGER, g3pktrunklightHour INTEGER, g3pktrunklightCarried INTEGER } g3pktrunklightTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number." ::= { g3pktrunklightEntry 1 } g3pktrunklightMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the group member number." ::= { g3pktrunklightEntry 2 } g3pktrunklightYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pktrunklightEntry 3 } g3pktrunklightMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pktrunklightEntry 4 } g3pktrunklightDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pktrunklightEntry 5 } g3pktrunklightHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pktrunklightEntry 6 } g3pktrunklightCarried OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls carried on the trunk member over the measurement interval." ::= { g3pktrunklightEntry 7 } -- the g3pnblock group g3pnblockTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the port network blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3pnblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pnblock 1 } g3pnblockTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the port network blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for port network blockage objects is received by the agent it uses the g3pnblockage and g3pnblockintvl objects to determine whether it should refresh the cached pnblockTable. If g3pnblockstmp + g3pnblockintvl is less than the current value of the sysUpTime object then the agent refreshes the pnblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pnblock 2 } g3pnblockTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pnblock 3 } g3pnblockTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pnblock 4 } g3pnblockTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pnblock 5 } g3pnblockTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pnblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pnblock entries." ::= { g3pnblock 6 } g3pnblockEntry OBJECT-TYPE SYNTAX G3pnblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pnblock entry containing objects of the g3pnblock information sent by the switch." INDEX { g3pnblockPNNumber } ::= { g3pnblockTable 1 } G3pnblockEntry ::= SEQUENCE { g3pnblockPNNumber INTEGER, g3pnblockMeasHour INTEGER, g3pnblockYear INTEGER, g3pnblockMonth INTEGER, g3pnblockDay INTEGER, g3pnblockHour INTEGER, g3pnblockTdmUsage INTEGER, g3pnblockTdmPeg INTEGER, g3pnblockTdmPeak INTEGER, g3pnblockTdmBlockage INTEGER, g3pnblockTimeSlots INTEGER, g3pnblockPNlinkUsage INTEGER, g3pnblockPNlinkPeg INTEGER, g3pnblockPNlinkPeak INTEGER, g3pnblockPNlinkBlockage INTEGER } g3pnblockPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3pnblockEntry 1 } g3pnblockMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pnblockEntry 2 } g3pnblockYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pnblockEntry 3 } g3pnblockMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pnblockEntry 4 } g3pnblockDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pnblockEntry 5 } g3pnblockHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pnblockEntry 6 } g3pnblockTdmUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total TDM time-slot usage." ::= { g3pnblockEntry 7 } g3pnblockTdmPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switch TDM time-slot seizure attempts for the PN." ::= { g3pnblockEntry 8 } g3pnblockTdmPeak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the maximum number of time-slots allocated at any one time." ::= { g3pnblockEntry 9 } g3pnblockTdmBlockage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of TDM blockages, that is, the total number of times a TDM time-slot request is denied for the PN." ::= { g3pnblockEntry 10 } g3pnblockTimeSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of PN link time-slots available between port networks or between Port Networks and Switch Nodes." ::= { g3pnblockEntry 11 } g3pnblockPNlinkUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total circuit switch usage of the available PN link(s) connecting the PN to the SN or to other PNs." ::= { g3pnblockEntry 12 } g3pnblockPNlinkPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched time-slot seizure attempts for the link(s)." ::= { g3pnblockEntry 13 } g3pnblockPNlinkPeak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the maximum number of time slots allocated at any one time on the PN links." ::= { g3pnblockEntry 14 } g3pnblockPNlinkBlockage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched PN blockages, that is, the number of times a PN link time-slot is denied." ::= { g3pnblockEntry 15 } -- the g3pkpnblock group g3pkpnblockTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the port network blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3pnblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkpnblock 1 } g3pkpnblockTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the port network blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for port network blockage objects is received by the agent it uses the g3pnblockage and g3pnblockintvl objects to determine whether it should refresh the cached pnblockTable. If g3pnblockstmp + g3pnblockintvl is less than the current value of the sysUpTime object then the agent refreshes the pnblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkpnblock 2 } g3pkpnblockTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkpnblock 3 } g3pkpnblockTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkpnblock 4 } g3pkpnblockTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkpnblock 5 } g3pkpnblockTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkpnblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkpnblock entries." ::= { g3pkpnblock 6 } g3pkpnblockEntry OBJECT-TYPE SYNTAX G3pkpnblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkpnblock entry containing objects of the g3pkpnblock information sent by the switch." INDEX { g3pkpnblockPNNumber } ::= { g3pkpnblockTable 1 } G3pkpnblockEntry ::= SEQUENCE { g3pkpnblockPNNumber INTEGER, g3pkpnblockMeasHour INTEGER, g3pkpnblockYear INTEGER, g3pkpnblockMonth INTEGER, g3pkpnblockDay INTEGER, g3pkpnblockHour INTEGER, g3pkpnblockTdmUsage INTEGER, g3pkpnblockTdmPeg INTEGER, g3pkpnblockTdmPeak INTEGER, g3pkpnblockTdmBlockage INTEGER, g3pkpnblockTimeSlots INTEGER, g3pkpnblockPNlinkUsage INTEGER, g3pkpnblockPNlinkPeg INTEGER, g3pkpnblockPNlinkPeak INTEGER, g3pkpnblockPNlinkBlockage INTEGER } g3pkpnblockPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3pkpnblockEntry 1 } g3pkpnblockMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pkpnblockEntry 2 } g3pkpnblockYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkpnblockEntry 3 } g3pkpnblockMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkpnblockEntry 4 } g3pkpnblockDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkpnblockEntry 5 } g3pkpnblockHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkpnblockEntry 6 } g3pkpnblockTdmUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total TDM time-slot usage." ::= { g3pkpnblockEntry 7 } g3pkpnblockTdmPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switch TDM time-slot seizure attempts for the PN." ::= { g3pkpnblockEntry 8 } g3pkpnblockTdmPeak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the maximum number of time-slots allocated at any one time." ::= { g3pkpnblockEntry 9 } g3pkpnblockTdmBlockage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of TDM blockages, that is, the total number of times a TDM time-slot request is denied for the PN." ::= { g3pkpnblockEntry 10 } g3pkpnblockTimeSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of PN link time-slots available between port networks or between Port Networks and Switch Nodes." ::= { g3pkpnblockEntry 11 } g3pkpnblockPNlinkUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total circuit switch usage of the available PN link(s) connecting the PN to the SN or to other PNs." ::= { g3pkpnblockEntry 12 } g3pkpnblockPNlinkPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched time-slot seizure attempts for the link(s)." ::= { g3pkpnblockEntry 13 } g3pkpnblockPNlinkPeak OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the maximum number of time slots allocated at any one time on the PN links." ::= { g3pkpnblockEntry 14 } g3pkpnblockPNlinkBlockage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched PN blockages, that is, the number of times a PN link time-slot is denied." ::= { g3pkpnblockEntry 15 } -- the g3snblock group g3snblockTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the switch node blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3snblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3snblock 1 } g3snblockTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the switch node blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for switch node blockage objects is received by the agent it uses the g3snblockage and g3snblockintvl objects to determine whether it should refresh the cached snblockTable. If g3snblockstmp + g3snblockintvl is less than the current value of the sysUpTime object then the agent refreshes the snblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3snblock 2 } g3snblockTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3snblock 3 } g3snblockTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3snblock 4 } g3snblockTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3snblock 5 } g3snblockTable OBJECT-TYPE SYNTAX SEQUENCE OF G3snblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3snblock entries." ::= { g3snblock 6 } g3snblockEntry OBJECT-TYPE SYNTAX G3snblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3snblock entry containing objects of the g3snblock information sent by the switch." INDEX { g3snblockSnPair } ::= { g3snblockTable 1 } G3snblockEntry ::= SEQUENCE { g3snblockSnPair DisplayString, g3snblockMeasHour INTEGER, g3snblockYear INTEGER, g3snblockMonth INTEGER, g3snblockDay INTEGER, g3snblockHour INTEGER, g3snblockTimeSlots INTEGER, g3snblockUsage INTEGER, g3snblockSnPeg INTEGER, g3snblockLinkBlockage INTEGER, g3snblockOverflow INTEGER } g3snblockSnPair OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the identifiers for the two SNs connected by the SN link being measured." ::= { g3snblockEntry 1 } g3snblockMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3snblockEntry 2 } g3snblockYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3snblockEntry 3 } g3snblockMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3snblockEntry 4 } g3snblockDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3snblockEntry 5 } g3snblockHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3snblockEntry 6 } g3snblockTimeSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of SN link time-slots available between SNs." ::= { g3snblockEntry 7 } g3snblockUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total circuit switch usage of the SN link connecting the two SNs." ::= { g3snblockEntry 8 } g3snblockSnPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched SN link time-slot seizure attempts between the two measured SNs." ::= { g3snblockEntry 9 } g3snblockLinkBlockage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched SN link blockages, that is, the total number of times a call is blocked because no time-slots are available either in the most direct route or through any alternate route." ::= { g3snblockEntry 10 } g3snblockOverflow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a call had to be routed over an alternate route." ::= { g3snblockEntry 11 } -- the g3pksnblock group g3pksnblockTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the switch node blockage data was last extracted from the switch by the Proxy Agent. This object along with the g3snblockintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pksnblock 1 } g3pksnblockTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the switch node blockage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for switch node blockage objects is received by the agent it uses the g3snblockage and g3snblockintvl objects to determine whether it should refresh the cached snblockTable. If g3snblockstmp + g3snblockintvl is less than the current value of the sysUpTime object then the agent refreshes the snblockTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pksnblock 2 } g3pksnblockTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pksnblock 3 } g3pksnblockTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pksnblock 4 } g3pksnblockTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pksnblock 5 } g3pksnblockTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pksnblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pksnblock entries." ::= { g3pksnblock 6 } g3pksnblockEntry OBJECT-TYPE SYNTAX G3pksnblockEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pksnblock entry containing objects of the g3pksnblock information sent by the switch." INDEX { g3pksnblockSnPair } ::= { g3pksnblockTable 1 } G3pksnblockEntry ::= SEQUENCE { g3pksnblockSnPair DisplayString, g3pksnblockMeasHour INTEGER, g3pksnblockYear INTEGER, g3pksnblockMonth INTEGER, g3pksnblockDay INTEGER, g3pksnblockHour INTEGER, g3pksnblockTimeSlots INTEGER, g3pksnblockUsage INTEGER, g3pksnblockSnPeg INTEGER, g3pksnblockLinkBlockage INTEGER, g3pksnblockOverflow INTEGER } g3pksnblockSnPair OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the identifiers for the two SNs connected by the SN link being measured." ::= { g3pksnblockEntry 1 } g3pksnblockMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pksnblockEntry 2 } g3pksnblockYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pksnblockEntry 3 } g3pksnblockMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pksnblockEntry 4 } g3pksnblockDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pksnblockEntry 5 } g3pksnblockHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pksnblockEntry 6 } g3pksnblockTimeSlots OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of SN link time-slots available between SNs." ::= { g3pksnblockEntry 7 } g3pksnblockUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total circuit switch usage of the SN link connecting the two SNs." ::= { g3pksnblockEntry 8 } g3pksnblockSnPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched SN link time-slot seizure attempts between the two measured SNs." ::= { g3pksnblockEntry 9 } g3pksnblockLinkBlockage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total count of circuit switched SN link blockages, that is, the total number of times a call is blocked because no time-slots are available either in the most direct route or through any alternate route." ::= { g3pksnblockEntry 10 } g3pksnblockOverflow OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a call had to be routed over an alternate route." ::= { g3pksnblockEntry 11 } -- the g3hunt group g3huntTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the hunt group data was last extracted from the switch by the Proxy Agent. This object along with the g3huntintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3hunt 1 } g3huntTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the hunt group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for hunt group objects is received by the agent it uses the g3huntage and g3huntintvl objects to determine whether it should refresh the cached huntTable. If g3huntstmp + g3huntintvl is less than the current value of the sysUpTime object then the agent refreshes the huntTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3hunt 2 } g3huntTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3hunt 3 } g3huntTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3hunt 4 } g3huntTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3hunt 5 } g3huntTable OBJECT-TYPE SYNTAX SEQUENCE OF G3huntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3hunt entries." ::= { g3hunt 6 } g3huntEntry OBJECT-TYPE SYNTAX G3huntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3hunt entry containing objects of the g3hunt information sent by the switch." INDEX { g3huntHuntGroup } ::= { g3huntTable 1 } G3huntEntry ::= SEQUENCE { g3huntHuntGroup INTEGER, g3huntMeasHour INTEGER, g3huntYear INTEGER, g3huntMonth INTEGER, g3huntDay INTEGER, g3huntHour INTEGER, g3huntGroupSize INTEGER, g3huntTotalUsage INTEGER, g3huntCallsAns INTEGER, g3huntCallsAban INTEGER, g3huntQueSiz INTEGER, g3huntCallsQue INTEGER, g3huntQueOvfl INTEGER, g3huntTimeAvail INTEGER, g3huntSpeedAns INTEGER } g3huntHuntGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hunt group number." ::= { g3huntEntry 1 } g3huntMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3huntEntry 2 } g3huntYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3huntEntry 3 } g3huntMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3huntEntry 4 } g3huntDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3huntEntry 5 } g3huntHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3huntEntry 6 } g3huntGroupSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of members in the trunk group." ::= { g3huntEntry 7 } g3huntTotalUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the sum of all times that the members of the hunt group are busy on hunt group calls (in CCS)." ::= { g3huntEntry 8 } g3huntCallsAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that are answered by the hunt group." ::= { g3huntEntry 9 } g3huntCallsAban OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that attempt to reach the hunt group but abandon the attempt before being answered." ::= { g3huntEntry 10 } g3huntQueSiz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the length of the queue assigned to the hunt group during administration." ::= { g3huntEntry 11 } g3huntCallsQue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that arrive to find all members of the hunt group busy and are placed in the queue." ::= { g3huntEntry 12 } g3huntQueOvfl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that arrive when all slots in the hunt group queue are occupied." ::= { g3huntEntry 13 } g3huntTimeAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that the hunt group extensions are not in use but are available to receive hunt group calls (in CCS)." ::= { g3huntEntry 14 } g3huntSpeedAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average time interval from when the call first enters the hunt group or hunt group queue until the call is answered by a hunt group member (in seconds)." ::= { g3huntEntry 15 } -- the g3pkhunt group g3pkhuntTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak hunt group data was last extracted from the switch by the Proxy Agent. This object along with the g3pkhuntintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkhunt 1 } g3pkhuntTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the peak hunt group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for peak hunt group objects is received by the agent it uses the g3pkhuntage and g3pkhuntintvl objects to determine whether it should refresh the cached pkhuntTable. If g3pkhuntstmp + g3pkhuntintvl is less than the current value of the sysUpTime object then the agent refreshes the pkhuntTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkhunt 2 } g3pkhuntTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkhunt 3 } g3pkhuntTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkhunt 4 } g3pkhuntTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkhunt 5 } g3pkhuntTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkhuntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkhunt entries." ::= { g3pkhunt 6 } g3pkhuntEntry OBJECT-TYPE SYNTAX G3pkhuntEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkhunt entry containing objects of the g3pkhunt information sent by the switch." INDEX { g3pkhuntHuntGroup } ::= { g3pkhuntTable 1 } G3pkhuntEntry ::= SEQUENCE { g3pkhuntHuntGroup INTEGER, g3pkhuntMeasHour INTEGER, g3pkhuntYear INTEGER, g3pkhuntMonth INTEGER, g3pkhuntDay INTEGER, g3pkhuntHour INTEGER, g3pkhuntGroupSize INTEGER, g3pkhuntTotalUsage INTEGER, g3pkhuntCallsAns INTEGER, g3pkhuntCallsAban INTEGER, g3pkhuntQueSiz INTEGER, g3pkhuntCallsQue INTEGER, g3pkhuntQueOvfl INTEGER, g3pkhuntTimeAvail INTEGER, g3pkhuntSpeedAns INTEGER } g3pkhuntHuntGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hunt group number." ::= { g3pkhuntEntry 1 } g3pkhuntMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pkhuntEntry 2 } g3pkhuntYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkhuntEntry 3 } g3pkhuntMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkhuntEntry 4 } g3pkhuntDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkhuntEntry 5 } g3pkhuntHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkhuntEntry 6 } g3pkhuntGroupSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of members in the trunk group." ::= { g3pkhuntEntry 7 } g3pkhuntTotalUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the sum of all times that the members of the hunt group are busy on hunt group calls (in CCS)." ::= { g3pkhuntEntry 8 } g3pkhuntCallsAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that are answered by the hunt group." ::= { g3pkhuntEntry 9 } g3pkhuntCallsAban OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that attempt to reach the hunt group but abandon the attempt before being answered." ::= { g3pkhuntEntry 10 } g3pkhuntQueSiz OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the length of the queue assigned to the hunt group during administration." ::= { g3pkhuntEntry 11 } g3pkhuntCallsQue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that arrive to find all members of the hunt group busy and are placed in the queue." ::= { g3pkhuntEntry 12 } g3pkhuntQueOvfl OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that arrive when all slots in the hunt group queue are occupied." ::= { g3pkhuntEntry 13 } g3pkhuntTimeAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that the hunt group extensions are not in use but are available to receive hunt group calls (in CCS)." ::= { g3pkhuntEntry 14 } g3pkhuntSpeedAns OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average time interval from when the call first enters the hunt group or hunt group queue until the call is answered by a hunt group member (in seconds)." ::= { g3pkhuntEntry 15 } -- the g3huntlist group g3huntlistTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the hunt group list data was last extracted from the switch by the Proxy Agent. This object along with the g3huntlistintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3huntlist 1 } g3huntlistTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the hunt group list data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for hunt group list objects is received by the agent it uses the g3huntlistage and g3huntlistintvl objects to determine whether it should refresh the cached huntlistTable. If g3huntliststmp + g3huntlistintvl is less than the current value of the sysUpTime object then the agent refreshes the huntlistTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3huntlist 2 } g3huntlistTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3huntlist 3 } g3huntlistTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3huntlist 4 } g3huntlistTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3huntlist 5 } g3huntlistTable OBJECT-TYPE SYNTAX SEQUENCE OF G3huntlistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3huntlist entries." ::= { g3huntlist 6 } g3huntlistEntry OBJECT-TYPE SYNTAX G3huntlistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3huntlist entry containing objects of the g3huntlist information sent by the switch." INDEX { g3huntlistHGNumber } ::= { g3huntlistTable 1 } G3huntlistEntry ::= SEQUENCE { g3huntlistHGNumber INTEGER, g3huntlistName DisplayString, g3huntlistExtension DisplayString, g3huntlistType DisplayString } g3huntlistHGNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of the hunt group." ::= { g3huntlistEntry 1 } g3huntlistName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..27)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name of the hunt group." ::= { g3huntlistEntry 2 } g3huntlistExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension of the hunt group." ::= { g3huntlistEntry 3 } g3huntlistType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the type of hunt group." ::= { g3huntlistEntry 4 } -- the g3tonerec group g3tonerecTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the tone receiver data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3tonerec 1 } g3tonerecTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the tone receiver data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver objects is received by the agent it uses the g3tonerecage and g3tonerecintvl objects to determine whether it should refresh the cached tonerecTable. If g3tonerecstmp + g3tonerecintvl is less than the current value of the sysUpTime object then the agent refreshes the tonerecTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3tonerec 2 } g3tonerecTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3tonerec 3 } g3tonerecTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3tonerec 4 } g3tonerecTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3tonerec 5 } g3tonerecTable OBJECT-TYPE SYNTAX SEQUENCE OF G3tonerecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3tonerec entries." ::= { g3tonerec 6 } g3tonerecEntry OBJECT-TYPE SYNTAX G3tonerecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3tonerec entry containing objects of the g3tonerec information sent by the switch." INDEX { g3tonerecPNNumber } ::= { g3tonerecTable 1 } G3tonerecEntry ::= SEQUENCE { g3tonerecPNNumber INTEGER, g3tonerecMeasHour INTEGER, g3tonerecYear INTEGER, g3tonerecMonth INTEGER, g3tonerecDay INTEGER, g3tonerecHour INTEGER, g3tonerecDTMFPnReq INTEGER, g3tonerecDTMFPnAlloc INTEGER, g3tonerecDTMFPkAlloc INTEGER, g3tonerecDTMFTotOffPN INTEGER, g3tonerecDTMFPkOffPN INTEGER, g3tonerecGPTDPnReq INTEGER, g3tonerecGPTDPnAlloc INTEGER, g3tonerecGPTDPkAlloc INTEGER, g3tonerecGPTDTotOffPN INTEGER, g3tonerecGPTDPkOffPN INTEGER, g3tonerecCCTTRPnReq INTEGER, g3tonerecCCTTRPnAlloc INTEGER, g3tonerecCCTTRPkAlloc INTEGER, g3tonerecCCTTRTotOffPN INTEGER, g3tonerecCCTTRPkOffPN INTEGER, g3tonerecCCCPTRPnReq INTEGER, g3tonerecCCCPTRPnAlloc INTEGER, g3tonerecCCCPTRPkAlloc INTEGER, g3tonerecCCCPTRTotOffPN INTEGER, g3tonerecCCCPTRPkOffPN INTEGER, g3tonerecCCMFCRPnReq INTEGER, g3tonerecCCMFCRPnAlloc INTEGER, g3tonerecCCMFCRPkAlloc INTEGER, g3tonerecCCMFCRTotOffPN INTEGER, g3tonerecCCMFCRPkOffPN INTEGER } g3tonerecPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number in which the tone receiver is located." ::= { g3tonerecEntry 1 } g3tonerecMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3tonerecEntry 2 } g3tonerecYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3tonerecEntry 3 } g3tonerecMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3tonerecEntry 4 } g3tonerecDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3tonerecEntry 5 } g3tonerecHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3tonerecEntry 6 } g3tonerecDTMFPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of DTMF requests within the PN." ::= { g3tonerecEntry 7 } g3tonerecDTMFPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of DTMF receivers located in the listed PN that were allocated during the last hour." ::= { g3tonerecEntry 8 } g3tonerecDTMFPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of DTMF receivers located in the listed PN that were in use simulatneously." ::= { g3tonerecEntry 9 } g3tonerecDTMFTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of DTMF receivers allocated of a different PN for requests originated on this PN." ::= { g3tonerecEntry 10 } g3tonerecDTMFPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of DTMF receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3tonerecEntry 11 } g3tonerecGPTDPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of GPTD requests within the PN." ::= { g3tonerecEntry 12 } g3tonerecGPTDPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of GPTD receivers located in the listed PN that were allocated during the last hour." ::= { g3tonerecEntry 13 } g3tonerecGPTDPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of GPTD receivers located in the listed PN that were in use simulatneously." ::= { g3tonerecEntry 14 } g3tonerecGPTDTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of GPTD receivers allocated of a different PN for requests originated on this PN." ::= { g3tonerecEntry 15 } g3tonerecGPTDPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of GPTD receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3tonerecEntry 16 } g3tonerecCCTTRPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of CC-TTR requests within the PN." ::= { g3tonerecEntry 17 } g3tonerecCCTTRPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-TTR receivers located in the listed PN that were allocated during the last hour." ::= { g3tonerecEntry 18 } g3tonerecCCTTRPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-TTR receivers located in the listed PN that were in use simulatneously." ::= { g3tonerecEntry 19 } g3tonerecCCTTRTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-TTR receivers allocated of a different PN for requests originated on this PN." ::= { g3tonerecEntry 20 } g3tonerecCCTTRPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-TTR receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3tonerecEntry 21 } g3tonerecCCCPTRPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of CC-CPTR requests within the PN." ::= { g3tonerecEntry 22 } g3tonerecCCCPTRPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-CPTR receivers located in the listed PN that were allocated during the last hour." ::= { g3tonerecEntry 23 } g3tonerecCCCPTRPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-CPTR receivers located in the listed PN that were in use simulatneously." ::= { g3tonerecEntry 24 } g3tonerecCCCPTRTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-CPTR receivers allocated of a different PN for requests originated on this PN." ::= { g3tonerecEntry 25 } g3tonerecCCCPTRPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-CPTR receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3tonerecEntry 26 } g3tonerecCCMFCRPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of CC-MFCR requests within the PN." ::= { g3tonerecEntry 27 } g3tonerecCCMFCRPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-MFCR receivers located in the listed PN that were allocated during the last hour." ::= { g3tonerecEntry 28 } g3tonerecCCMFCRPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-MFCR receivers located in the listed PN that were in use simulatneously." ::= { g3tonerecEntry 29 } g3tonerecCCMFCRTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-MFCR receivers allocated of a different PN for requests originated on this PN." ::= { g3tonerecEntry 30 } g3tonerecCCMFCRPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-MFCR receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3tonerecEntry 31 } -- the g3pktonerec group g3pktonerecTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the tone receiver data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pktonerec 1 } g3pktonerecTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the tone receiver data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver objects is received by the agent it uses the g3tonerecage and g3tonerecintvl objects to determine whether it should refresh the cached tonerecTable. If g3tonerecstmp + g3tonerecintvl is less than the current value of the sysUpTime object then the agent refreshes the tonerecTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pktonerec 2 } g3pktonerecTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pktonerec 3 } g3pktonerecTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pktonerec 4 } g3pktonerecTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pktonerec 5 } g3pktonerecTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pktonerecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pktonerec entries." ::= { g3pktonerec 6 } g3pktonerecEntry OBJECT-TYPE SYNTAX G3pktonerecEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pktonerec entry containing objects of the g3pktonerec information sent by the switch." INDEX { g3pktonerecPNNumber } ::= { g3pktonerecTable 1 } G3pktonerecEntry ::= SEQUENCE { g3pktonerecPNNumber INTEGER, g3pktonerecMeasHour INTEGER, g3pktonerecYear INTEGER, g3pktonerecMonth INTEGER, g3pktonerecDay INTEGER, g3pktonerecHour INTEGER, g3pktonerecDTMFPnReq INTEGER, g3pktonerecDTMFPnAlloc INTEGER, g3pktonerecDTMFPkAlloc INTEGER, g3pktonerecDTMFTotOffPN INTEGER, g3pktonerecDTMFPkOffPN INTEGER, g3pktonerecGPTDPnReq INTEGER, g3pktonerecGPTDPnAlloc INTEGER, g3pktonerecGPTDPkAlloc INTEGER, g3pktonerecGPTDTotOffPN INTEGER, g3pktonerecGPTDPkOffPN INTEGER, g3pktonerecCCTTRPnReq INTEGER, g3pktonerecCCTTRPnAlloc INTEGER, g3pktonerecCCTTRPkAlloc INTEGER, g3pktonerecCCTTRTotOffPN INTEGER, g3pktonerecCCTTRPkOffPN INTEGER, g3pktonerecCCCPTRPnReq INTEGER, g3pktonerecCCCPTRPnAlloc INTEGER, g3pktonerecCCCPTRPkAlloc INTEGER, g3pktonerecCCCPTRTotOffPN INTEGER, g3pktonerecCCCPTRPkOffPN INTEGER, g3pktonerecCCMFCRPnReq INTEGER, g3pktonerecCCMFCRPnAlloc INTEGER, g3pktonerecCCMFCRPkAlloc INTEGER, g3pktonerecCCMFCRTotOffPN INTEGER, g3pktonerecCCMFCRPkOffPN INTEGER } g3pktonerecPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number in which the tone receiver is located." ::= { g3pktonerecEntry 1 } g3pktonerecMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktonerecEntry 2 } g3pktonerecYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pktonerecEntry 3 } g3pktonerecMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pktonerecEntry 4 } g3pktonerecDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pktonerecEntry 5 } g3pktonerecHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pktonerecEntry 6 } g3pktonerecDTMFPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of DTMF requests within the PN." ::= { g3pktonerecEntry 7 } g3pktonerecDTMFPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of DTMF receivers located in the listed PN that were allocated during the last hour." ::= { g3pktonerecEntry 8 } g3pktonerecDTMFPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of DTMF receivers located in the listed PN that were in use simulatneously." ::= { g3pktonerecEntry 9 } g3pktonerecDTMFTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of DTMF receivers allocated of a different PN for requests originated on this PN." ::= { g3pktonerecEntry 10 } g3pktonerecDTMFPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of DTMF receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3pktonerecEntry 11 } g3pktonerecGPTDPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of GPTD requests within the PN." ::= { g3pktonerecEntry 12 } g3pktonerecGPTDPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of GPTD receivers located in the listed PN that were allocated during the last hour." ::= { g3pktonerecEntry 13 } g3pktonerecGPTDPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of GPTD receivers located in the listed PN that were in use simulatneously." ::= { g3pktonerecEntry 14 } g3pktonerecGPTDTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of GPTD receivers allocated of a different PN for requests originated on this PN." ::= { g3pktonerecEntry 15 } g3pktonerecGPTDPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of GPTD receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3pktonerecEntry 16 } g3pktonerecCCTTRPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of CC-TTR requests within the PN." ::= { g3pktonerecEntry 17 } g3pktonerecCCTTRPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-TTR receivers located in the listed PN that were allocated during the last hour." ::= { g3pktonerecEntry 18 } g3pktonerecCCTTRPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-TTR receivers located in the listed PN that were in use simulatneously." ::= { g3pktonerecEntry 19 } g3pktonerecCCTTRTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-TTR receivers allocated of a different PN for requests originated on this PN." ::= { g3pktonerecEntry 20 } g3pktonerecCCTTRPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-TTR receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3pktonerecEntry 21 } g3pktonerecCCCPTRPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of CC-CPTR requests within the PN." ::= { g3pktonerecEntry 22 } g3pktonerecCCCPTRPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-CPTR receivers located in the listed PN that were allocated during the last hour." ::= { g3pktonerecEntry 23 } g3pktonerecCCCPTRPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-CPTR receivers located in the listed PN that were in use simulatneously." ::= { g3pktonerecEntry 24 } g3pktonerecCCCPTRTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-CPTR receivers allocated of a different PN for requests originated on this PN." ::= { g3pktonerecEntry 25 } g3pktonerecCCCPTRPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-CPTR receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3pktonerecEntry 26 } g3pktonerecCCMFCRPnReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of CC-MFCR requests within the PN." ::= { g3pktonerecEntry 27 } g3pktonerecCCMFCRPnAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-MFCR receivers located in the listed PN that were allocated during the last hour." ::= { g3pktonerecEntry 28 } g3pktonerecCCMFCRPkAlloc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-MFCR receivers located in the listed PN that were in use simulatneously." ::= { g3pktonerecEntry 29 } g3pktonerecCCMFCRTotOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of CC-MFCR receivers allocated of a different PN for requests originated on this PN." ::= { g3pktonerecEntry 30 } g3pktonerecCCMFCRPkOffPN OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of CC-MFCR receivers simultaneously allocated on a different PN for requests originated on this PN." ::= { g3pktonerecEntry 31 } -- the g3tonerecsum group g3tonerecsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the tone receiver summary data was last extracted from the switch by the Proxy Agent. This object along with the g3tonerecsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3tonerecsum 1 } g3tonerecsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the tone receiver summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver summary objects is received by the agent it uses the g3tonerecsumage and g3tonerecsumintvl objects to determine whether it should refresh the cached tonerecsumTable. If g3tonerecsumstmp + g3tonerecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the tonerecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3tonerecsum 2 } g3tonerecsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3tonerecsum 3 } g3tonerecsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3tonerecsum 4 } g3tonerecsumRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3tonerecsum 5 } g3tonerecsumRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3tonerecsum 6 } g3tonerecsumRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3tonerecsum 7 } g3tonerecsumRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3tonerecsum 8 } g3tonerecsumDTMFHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3tonerecsum 9 } g3tonerecsumDTMFTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3tonerecsum 10 } g3tonerecsumDTMFPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3tonerecsum 11 } g3tonerecsumDTMFTQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval." ::= { g3tonerecsum 12 } g3tonerecsumDTMFPQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type." ::= { g3tonerecsum 13 } g3tonerecsumDTMFTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 14 } g3tonerecsumDTMFPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 15 } g3tonerecsumGPTDHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3tonerecsum 16 } g3tonerecsumGPTDTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3tonerecsum 17 } g3tonerecsumGPTDPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3tonerecsum 18 } g3tonerecsumGPTDTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 19 } g3tonerecsumGPTDPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 20 } g3tonerecsumCCTTRHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3tonerecsum 21 } g3tonerecsumCCTTRTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3tonerecsum 22 } g3tonerecsumCCTTRPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3tonerecsum 23 } g3tonerecsumCCTTRTQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval." ::= { g3tonerecsum 24 } g3tonerecsumCCTTRPQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type." ::= { g3tonerecsum 25 } g3tonerecsumCCTTRTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 26 } g3tonerecsumCCTTRPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 27 } g3tonerecsumCCCPTRHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3tonerecsum 28 } g3tonerecsumCCCPTRTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3tonerecsum 29 } g3tonerecsumCCCPTRPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3tonerecsum 30 } g3tonerecsumCCCPTRTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 31 } g3tonerecsumCCCPTRPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 32 } g3tonerecsumCCMFCRHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3tonerecsum 33 } g3tonerecsumCCMFCRTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3tonerecsum 34 } g3tonerecsumCCMFCRPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3tonerecsum 35 } g3tonerecsumCCMFCRTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 36 } g3tonerecsumCCMFCRPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3tonerecsum 37 } g3tonerecsumDTMRTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3tonerecsum 38 } g3tonerecsumGPRDTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3tonerecsum 39 } g3tonerecsumCLASTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3tonerecsum 40 } g3tonerecsumETRTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3tonerecsum 41 } -- the g3pktonerecsum group g3pktonerecsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the tone receiver summary data was last extracted from the switch by the Proxy Agent. This object along with the g3pktonerecsumintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pktonerecsum 1 } g3pktonerecsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the tone receiver summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for tone receiver summary objects is received by the agent it uses the g3pktonerecsumage and g3pktonerecsumintvl objects to determine whether it should refresh the cached pktonerecsumTable. If pkg3tonerecsumstmp+pkg3tonerecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the pktonerecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pktonerecsum 2 } g3pktonerecsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pktonerecsum 3 } g3pktonerecsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pktonerecsum 4 } g3pktonerecsumRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pktonerecsum 5 } g3pktonerecsumRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pktonerecsum 6 } g3pktonerecsumRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pktonerecsum 7 } g3pktonerecsumRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktonerecsum 8 } g3pktonerecsumDTMFHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktonerecsum 9 } g3pktonerecsumDTMFTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3pktonerecsum 10 } g3pktonerecsumDTMFPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3pktonerecsum 11 } g3pktonerecsumDTMFTQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval." ::= { g3pktonerecsum 12 } g3pktonerecsumDTMFPQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type." ::= { g3pktonerecsum 13 } g3pktonerecsumDTMFTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 14 } g3pktonerecsumDTMFPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were" ::= { g3pktonerecsum 15 } g3pktonerecsumGPTDHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktonerecsum 16 } g3pktonerecsumGPTDTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3pktonerecsum 17 } g3pktonerecsumGPTDPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3pktonerecsum 18 } g3pktonerecsumGPTDTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 19 } g3pktonerecsumGPTDPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 20 } g3pktonerecsumCCTTRHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktonerecsum 21 } g3pktonerecsumCCTTRTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3pktonerecsum 22 } g3pktonerecsumCCTTRPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3pktonerecsum 23 } g3pktonerecsumCCTTRTQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests queued for tone receivers of this type during the measurement interval." ::= { g3pktonerecsum 24 } g3pktonerecsumCCTTRPQueue OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests queued at any one time during the measurement hour for tone receivers of this type." ::= { g3pktonerecsum 25 } g3pktonerecsumCCTTRTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 26 } g3pktonerecsumCCTTRPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 27 } g3pktonerecsumCCCPTRHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktonerecsum 28 } g3pktonerecsumCCCPTRTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3pktonerecsum 29 } g3pktonerecsumCCCPTRPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3pktonerecsum 30 } g3pktonerecsumCCCPTRTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 31 } g3pktonerecsumCCCPTRPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 32 } g3pktonerecsumCCMFCRHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3pktonerecsum 33 } g3pktonerecsumCCMFCRTReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests for tone receivers of this type for the measurement interval." ::= { g3pktonerecsum 34 } g3pktonerecsumCCMFCRPReq OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of simultaneous requests for tone receivers of this type that occurred at any one time over the measurement interval." ::= { g3pktonerecsum 35 } g3pktonerecsumCCMFCRTDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide total number of requests that were denied because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 36 } g3pktonerecsumCCMFCRPDeny OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system-wide peak number of requests that were denied at any one time because no receivers of this type were available during the measurement hour." ::= { g3pktonerecsum 37 } g3pktonerecsumDTMRTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3pktonerecsum 38 } g3pktonerecsumGPRDTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3pktonerecsum 39 } g3pktonerecsumCLASTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3pktonerecsum 40 } g3pktonerecsumETRTAvail OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports available for the type of tone receiver." ::= { g3pktonerecsum 41 } -- the g3rpatcfg group g3rpatcfgTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatcfgintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3rpatcfg 1 } g3rpatcfgTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for route pattern objects is received by the agent it uses the g3rpatcfgage and g3rpatcfgintvl objects to determine whether it should refresh the cached rpatcfgTable. If g3rpatcfgstmp + g3rpatcfgintvl is less than the current value of the sysUpTime object then the agent refreshes the rpatcfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3rpatcfg 2 } g3rpatcfgTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3rpatcfg 3 } g3rpatcfgTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3rpatcfg 4 } g3rpatcfgTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3rpatcfg 5 } g3rpatcfgPattern1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 1 route pattern" ::= { g3rpatcfg 6 } g3rpatcfgPattern2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 2 route pattern" ::= { g3rpatcfg 7 } g3rpatcfgPattern3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 3 route pattern" ::= { g3rpatcfg 8 } g3rpatcfgPattern4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 4 route pattern" ::= { g3rpatcfg 9 } g3rpatcfgPattern5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 5 route pattern" ::= { g3rpatcfg 10 } g3rpatcfgPattern6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 6 route pattern" ::= { g3rpatcfg 11 } g3rpatcfgPattern7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 7 route pattern" ::= { g3rpatcfg 12 } g3rpatcfgPattern8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 8 route pattern" ::= { g3rpatcfg 13 } g3rpatcfgPattern9 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 9 route pattern" ::= { g3rpatcfg 14 } g3rpatcfgPattern10 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 10 route pattern" ::= { g3rpatcfg 15 } g3rpatcfgPattern11 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 11 route pattern" ::= { g3rpatcfg 16 } g3rpatcfgPattern12 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 12 route pattern" ::= { g3rpatcfg 17 } g3rpatcfgPattern13 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 13 route pattern" ::= { g3rpatcfg 18 } g3rpatcfgPattern14 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 14 route pattern" ::= { g3rpatcfg 19 } g3rpatcfgPattern15 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 15 route pattern" ::= { g3rpatcfg 20 } g3rpatcfgPattern16 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 16 route pattern" ::= { g3rpatcfg 21 } g3rpatcfgPattern17 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 17 route pattern" ::= { g3rpatcfg 22 } g3rpatcfgPattern18 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 18 route pattern" ::= { g3rpatcfg 23 } g3rpatcfgPattern19 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 19 route pattern" ::= { g3rpatcfg 24 } g3rpatcfgPattern20 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 20 route pattern" ::= { g3rpatcfg 25 } g3rpatcfgPattern21 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 21 route pattern" ::= { g3rpatcfg 26 } g3rpatcfgPattern22 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 22 route pattern" ::= { g3rpatcfg 27 } g3rpatcfgPattern23 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 23 route pattern" ::= { g3rpatcfg 28 } g3rpatcfgPattern24 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 24 route pattern" ::= { g3rpatcfg 29 } g3rpatcfgPattern25 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measurement 25 route pattern" ::= { g3rpatcfg 30 } -- the g3rpat group g3rpatTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3rpat 1 } g3rpatTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for route pattern objects is received by the agent it uses the g3rpatage and g3rpatintvl objects to determine whether it should refresh the cached rpatTable. If g3rpatstmp + g3rpatintvl is less than the current value of the sysUpTime object then the agent refreshes the rpatTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3rpat 2 } g3rpatTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3rpat 3 } g3rpatTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3rpat 4 } g3rpatTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3rpat 5 } g3rpatTable OBJECT-TYPE SYNTAX SEQUENCE OF G3rpatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3rpat entries." ::= { g3rpat 6 } g3rpatEntry OBJECT-TYPE SYNTAX G3rpatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3rpat entry containing objects of the g3rpat information sent by the switch." INDEX { g3rpatPattern, g3rpatIndex } ::= { g3rpatTable 1 } G3rpatEntry ::= SEQUENCE { g3rpatPattern INTEGER, g3rpatTrunkGroup INTEGER, g3rpatYear INTEGER, g3rpatMonth INTEGER, g3rpatDay INTEGER, g3rpatHour INTEGER, g3rpatQueueSize INTEGER, g3rpatCallsOffered INTEGER, g3rpatCallsCarried INTEGER, g3rpatCallsBlocked INTEGER, g3rpatCallsQueued INTEGER, g3rpatQueueOvflo INTEGER, g3rpatCallsCarrd INTEGER, g3rpatTotalCalls INTEGER, g3rpatIndex INTEGER } g3rpatPattern OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of route pattern being measured." ::= { g3rpatEntry 1 } g3rpatTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first trunk group number." ::= { g3rpatEntry 2 } g3rpatYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3rpatEntry 3 } g3rpatMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3rpatEntry 4 } g3rpatDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3rpatEntry 5 } g3rpatHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3rpatEntry 6 } g3rpatQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the length of the queue for the first trunk group in the route pattern." ::= { g3rpatEntry 7 } g3rpatCallsOffered OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls offered to the route pattern." ::= { g3rpatEntry 8 } g3rpatCallsCarried OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of seizures for all trunk groups in the routing pattern." ::= { g3rpatEntry 9 } g3rpatCallsBlocked OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of outgoing calls that found all trunk groups in the pattern busy." ::= { g3rpatEntry 10 } g3rpatCallsQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of offered calls that found all trunk groups in the pattern busy and were placed in queue for the first trunk group in the pattern." ::= { g3rpatEntry 11 } g3rpatQueueOvflo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that find the queue on the first trunk group full." ::= { g3rpatEntry 12 } g3rpatCallsCarrd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of total calls carried over the route pattern by the trunk group." ::= { g3rpatEntry 13 } g3rpatTotalCalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls carried by the route pattern over the trunk group." ::= { g3rpatEntry 14 } g3rpatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing an index for a route pattern/trunk group number combination to make a record unique." ::= { g3rpatEntry 15 } -- the g3pkrpat group g3pkrpatTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the route pattern data was last extracted from the switch by the Proxy Agent. This object along with the g3rpatintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkrpat 1 } g3pkrpatTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the route pattern data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for route pattern objects is received by the agent it uses the g3rpatage and g3rpatintvl objects to determine whether it should refresh the cached rpatTable. If g3rpatstmp + g3rpatintvl is less than the current value of the sysUpTime object then the agent refreshes the rpatTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkrpat 2 } g3pkrpatTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkrpat 3 } g3pkrpatTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkrpat 4 } g3pkrpatTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkrpat 5 } g3pkrpatTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkrpatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkrpat entries." ::= { g3pkrpat 6 } g3pkrpatEntry OBJECT-TYPE SYNTAX G3pkrpatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkrpat entry containing objects of the g3pkrpat information sent by the switch." INDEX { g3pkrpatPattern, g3pkrpatIndex } ::= { g3pkrpatTable 1 } G3pkrpatEntry ::= SEQUENCE { g3pkrpatPattern INTEGER, g3pkrpatTrunkGroup INTEGER, g3pkrpatYear INTEGER, g3pkrpatMonth INTEGER, g3pkrpatDay INTEGER, g3pkrpatHour INTEGER, g3pkrpatQueueSize INTEGER, g3pkrpatCallsOffered INTEGER, g3pkrpatCallsCarried INTEGER, g3pkrpatCallsBlocked INTEGER, g3pkrpatCallsQueued INTEGER, g3pkrpatQueueOvflo INTEGER, g3pkrpatCallsCarrd INTEGER, g3pkrpatTotalCalls INTEGER, g3pkrpatIndex INTEGER } g3pkrpatPattern OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of route pattern being measured." ::= { g3pkrpatEntry 1 } g3pkrpatTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first trunk group number." ::= { g3pkrpatEntry 2 } g3pkrpatYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkrpatEntry 3 } g3pkrpatMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkrpatEntry 4 } g3pkrpatDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkrpatEntry 5 } g3pkrpatHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkrpatEntry 6 } g3pkrpatQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the length of the queue for the first trunk group in the route pattern." ::= { g3pkrpatEntry 7 } g3pkrpatCallsOffered OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls offered to the route pattern." ::= { g3pkrpatEntry 8 } g3pkrpatCallsCarried OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of seizures for all trunk groups in the routing pattern." ::= { g3pkrpatEntry 9 } g3pkrpatCallsBlocked OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of outgoing calls that found all trunk groups in the pattern busy." ::= { g3pkrpatEntry 10 } g3pkrpatCallsQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of offered calls that found all trunk groups in the pattern busy and were placed in queue for the first trunk group in the pattern." ::= { g3pkrpatEntry 11 } g3pkrpatQueueOvflo OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that find the queue on the first trunk group full." ::= { g3pkrpatEntry 12 } g3pkrpatCallsCarrd OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of total calls carried over the route pattern by the trunk group." ::= { g3pkrpatEntry 13 } g3pkrpatTotalCalls OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls carried by the route" ::= { g3pkrpatEntry 14 } g3pkrpatIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing an index for a route pattern/trunk group number combination to make a record unique." ::= { g3pkrpatEntry 15 } -- the g3secviolate group g3secviolateTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the security violations data was last extracted from the switch by the Proxy Agent. This object along with the g3secviolateintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3secviolate 1 } g3secviolateTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the security violations data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for security violations objects is received by the agent it uses the g3secviolateage and g3secviolateintvl objects to determine whether it should refresh the cached secviolateTable. If g3secviolatestmp + g3secviolateintvl is less than the current value of the sysUpTime object then the agent refreshes the secviolateTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3secviolate 2 } g3secviolateTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3secviolate 3 } g3secviolateTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3secviolate 4 } g3secviolateTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3secviolate 5 } g3secviolateTable OBJECT-TYPE SYNTAX SEQUENCE OF G3secviolateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3secviolate entries." ::= { g3secviolate 6 } g3secviolateEntry OBJECT-TYPE SYNTAX G3secviolateEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3secviolate entry containing objects of the g3secviolate information sent by the switch." INDEX { g3secviolatePortType } ::= { g3secviolateTable 1 } G3secviolateEntry ::= SEQUENCE { g3secviolatePortType DisplayString, g3secviolateYear INTEGER, g3secviolateMonth INTEGER, g3secviolateDay INTEGER, g3secviolateHour INTEGER, g3secviolateCountSince DisplayString, g3secviolateValidBC INTEGER, g3secviolateInvalidBC INTEGER, g3secviolateViolateBC INTEGER, g3secviolateStnValidSSC INTEGER, g3secviolateStnInvalidSSC INTEGER, g3secviolateTrkValidSSC INTEGER, g3secviolateTrkInvalidSSC INTEGER, g3secviolateTtlValidSSC INTEGER, g3secviolateTtlInvalidSSC INTEGER, g3secviolateTtlViolateSSC INTEGER, g3secviolateStnValidAC INTEGER, g3secviolateStnInvalidAC INTEGER, g3secviolateStnViolateAC INTEGER, g3secviolateTrkValidAC INTEGER, g3secviolateTrkInvalidAC INTEGER, g3secviolateTrkViolateAC INTEGER, g3secviolateRAValidAC INTEGER, g3secviolateRAInvalidAC INTEGER, g3secviolateRAViolateAC INTEGER, g3secviolateAtdValidAC INTEGER, g3secviolateAtdInvalidAC INTEGER, g3secviolateAtdViolateAC INTEGER, g3secviolateTtlValidAC INTEGER, g3secviolateTtlInvalidAC INTEGER, g3secviolateTtlViolateAC INTEGER, g3secviolateLoginSuccess INTEGER, g3secviolateInvalidAttempt INTEGER, g3secviolateInvalidID INTEGER, g3secviolateForceDsc INTEGER, g3secviolateSecViolate INTEGER, g3secviolateTrivialAttempt INTEGER } g3secviolatePortType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the type of port to which the login was attempted." ::= { g3secviolateEntry 1 } g3secviolateYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3secviolateEntry 2 } g3secviolateMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3secviolateEntry 3 } g3secviolateDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3secviolateEntry 4 } g3secviolateHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3secviolateEntry 5 } g3secviolateCountSince OBJECT-TYPE SYNTAX DisplayString (SIZE (0..27)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3secviolateEntry 6 } g3secviolateValidBC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a user entered a valid barrier code." ::= { g3secviolateEntry 7 } g3secviolateInvalidBC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a user entered a invalid barrier code." ::= { g3secviolateEntry 8 } g3secviolateViolateBC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of security violations for barrier codes." ::= { g3secviolateEntry 9 } g3secviolateStnValidSSC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from stations that generated valid station security codes." ::= { g3secviolateEntry 10 } g3secviolateStnInvalidSSC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from stations that generated invalid station security codes." ::= { g3secviolateEntry 11 } g3secviolateTrkValidSSC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from trunks that generated valid station security codes." ::= { g3secviolateEntry 12 } g3secviolateTrkInvalidSSC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from trunks that generated invalid station security codes." ::= { g3secviolateEntry 13 } g3secviolateTtlValidSSC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of total calls that generated valid station security codes." ::= { g3secviolateEntry 14 } g3secviolateTtlInvalidSSC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of total calls that generated invalid station security codes." ::= { g3secviolateEntry 15 } g3secviolateTtlViolateSSC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of total calls that generated station security violations." ::= { g3secviolateEntry 16 } g3secviolateStnValidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from stations that generated valid authorization codes." ::= { g3secviolateEntry 17 } g3secviolateStnInvalidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from stations that generated invalid authorization codes." ::= { g3secviolateEntry 18 } g3secviolateStnViolateAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from stations that generated security violations for authorization codes." ::= { g3secviolateEntry 19 } g3secviolateTrkValidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from trunks that generated valid authorization codes." ::= { g3secviolateEntry 20 } g3secviolateTrkInvalidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from trunks that generated invalid authorization codes." ::= { g3secviolateEntry 21 } g3secviolateTrkViolateAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from trunks that generated security violations for authorization codes." ::= { g3secviolateEntry 22 } g3secviolateRAValidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from remote access that generated valid authorization codes." ::= { g3secviolateEntry 23 } g3secviolateRAInvalidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from remote access that generated invalid authorization codes." ::= { g3secviolateEntry 24 } g3secviolateRAViolateAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from remote access that generated security violations for authorization codes." ::= { g3secviolateEntry 25 } g3secviolateAtdValidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from attendants that generated valid authorization codes." ::= { g3secviolateEntry 26 } g3secviolateAtdInvalidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from attendants that generated invalid authorization codes." ::= { g3secviolateEntry 27 } g3secviolateAtdViolateAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls originating from attendants that generated security violations for authorization codes." ::= { g3secviolateEntry 28 } g3secviolateTtlValidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of total calls that generated valid authorization codes." ::= { g3secviolateEntry 29 } g3secviolateTtlInvalidAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of total calls that generated invalid authorization codes." ::= { g3secviolateEntry 30 } g3secviolateTtlViolateAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of total calls that generated security violations for authorization codes." ::= { g3secviolateEntry 31 } g3secviolateLoginSuccess OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of successful logins into the given port type." ::= { g3secviolateEntry 32 } g3secviolateInvalidAttempt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of login attempts where the login ID or password were invalid." ::= { g3secviolateEntry 33 } g3secviolateInvalidID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of login attempts where the login ID was invalid." ::= { g3secviolateEntry 34 } g3secviolateForceDsc OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of login processes that were disconnected automatically by the switch because the threshold for consecutive invalid login attempts was exceeded." ::= { g3secviolateEntry 35 } g3secviolateSecViolate OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of login security violations." ::= { g3secviolateEntry 36 } g3secviolateTrivialAttempt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a user connected to the system and gave no input to the login sequence." ::= { g3secviolateEntry 37 } -- the g3cbctrunk group g3cbctrunkTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the cbc trunk group data was last extracted from the switch by the Proxy Agent. This object along with the g3cbctrunkintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3cbctrunk 1 } g3cbctrunkTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the cbc trunk group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for cbc trunk group objects is received by the agent it uses the g3cbctrunkage and g3cbctrunkintvl objects to determine whether it should refresh the cached cbctrunkTable. If g3cbctrunkstmp + g3cbctrunkintvl is less than the current value of the sysUpTime object then the agent refreshes the cbctrunkTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3cbctrunk 2 } g3cbctrunkTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3cbctrunk 3 } g3cbctrunkTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3cbctrunk 4 } g3cbctrunkTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3cbctrunk 5 } g3cbctrunkTable OBJECT-TYPE SYNTAX SEQUENCE OF G3cbctrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3cbctrunk entries." ::= { g3cbctrunk 6 } g3cbctrunkEntry OBJECT-TYPE SYNTAX G3cbctrunkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3cbctrunk entry containing objects of the g3cbctrunk information sent by the switch." INDEX { g3cbctrunkTGNumber, g3cbctrunkServiceName } ::= { g3cbctrunkTable 1 } G3cbctrunkEntry ::= SEQUENCE { g3cbctrunkTGNumber INTEGER, g3cbctrunkServiceName DisplayString, g3cbctrunkYear INTEGER, g3cbctrunkMonth INTEGER, g3cbctrunkDay INTEGER, g3cbctrunkHour INTEGER, g3cbctrunkQueueSize INTEGER, g3cbctrunkCallsQueued INTEGER, g3cbctrunkQueueOvflw INTEGER, g3cbctrunkQueueAband INTEGER, g3cbctrunkTrunksOOS INTEGER, g3cbctrunkPlan1 INTEGER, g3cbctrunkPlan2 INTEGER, g3cbctrunkPlan3 INTEGER, g3cbctrunkPlan4 INTEGER, g3cbctrunkPlan5 INTEGER, g3cbctrunkPlan6 INTEGER, g3cbctrunkDur1 INTEGER, g3cbctrunkDur2 INTEGER, g3cbctrunkDur3 INTEGER, g3cbctrunkDur4 INTEGER, g3cbctrunkDur5 INTEGER, g3cbctrunkDur6 INTEGER, g3cbctrunkMinChan INTEGER, g3cbctrunkMaxChan INTEGER, g3cbctrunkMeasHour INTEGER, g3cbctrunkTotUsage INTEGER, g3cbctrunkTotSeize INTEGER, g3cbctrunkIncSeize INTEGER, g3cbctrunkTanSeize INTEGER, g3cbctrunkOvfTG INTEGER, g3cbctrunkOvfSF INTEGER, g3cbctrunkOvfMAX INTEGER, g3cbctrunkTBM INTEGER, g3cbctrunkATB INTEGER, g3cbctrunkOutBlk INTEGER } g3cbctrunkTGNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number." ::= { g3cbctrunkEntry 1 } g3cbctrunkServiceName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the name of the services or features for which the associated measurements are being reported." ::= { g3cbctrunkEntry 2 } g3cbctrunkYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3cbctrunkEntry 3 } g3cbctrunkMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3cbctrunkEntry 4 } g3cbctrunkDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3cbctrunkEntry 5 } g3cbctrunkHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3cbctrunkEntry 6 } g3cbctrunkQueueSize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the size of the trunk group queue." ::= { g3cbctrunkEntry 7 } g3cbctrunkCallsQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that entered the queue." ::= { g3cbctrunkEntry 8 } g3cbctrunkQueueOvflw OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that were denied access to the trunk, found the queue full, and received reorder tone." ::= { g3cbctrunkEntry 9 } g3cbctrunkQueueAband OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls that were removed from the queue by the system or the user." ::= { g3cbctrunkEntry 10 } g3cbctrunkTrunksOOS OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of trunks in the group that were out-of-service when measurements were collected." ::= { g3cbctrunkEntry 11 } g3cbctrunkPlan1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first usage allocation plan number (if any)." ::= { g3cbctrunkEntry 12 } g3cbctrunkPlan2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second usage allocation plan number (if any)." ::= { g3cbctrunkEntry 13 } g3cbctrunkPlan3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third usage allocation plan number (if any)." ::= { g3cbctrunkEntry 14 } g3cbctrunkPlan4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the fourth usage allocation plan number (if any)." ::= { g3cbctrunkEntry 15 } g3cbctrunkPlan5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the fifth usage allocation plan number (if any)." ::= { g3cbctrunkEntry 16 } g3cbctrunkPlan6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the sixth usage allocation plan number (if any)." ::= { g3cbctrunkEntry 17 } g3cbctrunkDur1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first usage allocation plan duration (in minutes) that the first plan was in effect (if any)." ::= { g3cbctrunkEntry 18 } g3cbctrunkDur2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second usage allocation plan duration (in minutes) that the second plan was in effect (if any)." ::= { g3cbctrunkEntry 19 } g3cbctrunkDur3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third usage allocation plan duration (in minutes) that the third plan was in effect (if any)." ::= { g3cbctrunkEntry 20 } g3cbctrunkDur4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the fourth usage allocation plan duration (in minutes) that the fourth plan was in effect (if any)." ::= { g3cbctrunkEntry 21 } g3cbctrunkDur5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the fifth usage allocation plan duration (in minutes) that the fifth plan was in effect (if any)." ::= { g3cbctrunkEntry 22 } g3cbctrunkDur6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the sixth usage allocation plan duration (in minutes) that the sixth plan was in effect (if any)." ::= { g3cbctrunkEntry 23 } g3cbctrunkMinChan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minimum number of channels in the ISDN-PRI CBC trunk group allocated to the specified service/feature." ::= { g3cbctrunkEntry 24 } g3cbctrunkMaxChan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the maximum number of channels in the ISDN-PRI CBC trunk group allocated to the specified service/feature." ::= { g3cbctrunkEntry 25 } g3cbctrunkMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken." ::= { g3cbctrunkEntry 26 } g3cbctrunkTotUsage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the sum of time (CCS) for all channels used by the specified service/feature." ::= { g3cbctrunkEntry 27 } g3cbctrunkTotSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of incoming and outgoing calls that requested the specified service/feature." ::= { g3cbctrunkEntry 28 } g3cbctrunkIncSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of incoming calls that requested the specified service/feature." ::= { g3cbctrunkEntry 29 } g3cbctrunkTanSeize OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of trunk-to-trunk call seizures using the specified service/feature." ::= { g3cbctrunkEntry 30 } g3cbctrunkOvfTG OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of outgoing calls that requested the specified service/feature, but were not carried because the calls arrived to find no idle trunk members." ::= { g3cbctrunkEntry 31 } g3cbctrunkOvfSF OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that requested the specified service/feature but were denied." ::= { g3cbctrunkEntry 32 } g3cbctrunkOvfMAX OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls that were not carried because they originated at a time when the specified service/feature had already used up its allotted maximum number of channels." ::= { g3cbctrunkEntry 33 } g3cbctrunkTBM OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the polling interval that the number of channels in use by the specified service/feature is below the specified minimum." ::= { g3cbctrunkEntry 34 } g3cbctrunkATB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measurement interval that the specified service/feature could not get a channel." ::= { g3cbctrunkEntry 35 } g3cbctrunkOutBlk OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the ratio of outgoing calls not carried for a specified service/feature to the outgoing calls offered by the service/feature." ::= { g3cbctrunkEntry 36 } -- the g3deftime group g3deftimeTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the definity time data was last extracted from the switch by the Proxy Agent. This object along with the g3deftimeintvl object allows the Network Manager to determine the validity of the definity time data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3deftime 1 } g3deftimeTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the definity time data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for definity time objects is received by the agent it uses the g3deftimeage and g3deftimeintvl objects to determine whether it should refresh the cached deftimeTable. If g3deftimestmp + g3deftimeintvl is less than the current value of the sysUpTime object then the agent refreshes the deftimeTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3deftime 2 } g3deftimeTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3deftime 3 } g3deftimeTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3deftime 4 } g3deftimeDayOfMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Day of the Month (1-31)." ::= { g3deftime 5 } g3deftimeMonth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the name of the Month ('January', 'February', 'March', 'April', 'May', 'June', 'July', 'August', 'September', 'October', 'November', or 'December')." ::= { g3deftime 6 } g3deftimeYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Year (0000-9999)." ::= { g3deftime 7 } g3deftimeDayOfWeek OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the day of the week ('Monday', 'Tuesday', 'Wednesday', 'Thursday', 'Friday', 'Saturday', or 'Sunday')." ::= { g3deftime 8 } g3deftimeHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Hour (0-23)." ::= { g3deftime 9 } g3deftimeMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Minute (0-59)." ::= { g3deftime 10 } g3deftimeSecond OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the current system time Second (0-59)." ::= { g3deftime 11 } -- the g3trunkout group g3trunkoutTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the trunk outage data was last extracted from the switch by the Proxy Agent. This object along with the g3trunkoutintvl object allows the Network Manager to determine the validity of the trunk outage data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3trunkout 1 } g3trunkoutTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the trunk outage data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for trunk outage objects is received by the agent it uses the g3trunkoutage and g3trunkoutintvl objects to determine whether it should refresh the cached trunkoutTable. If g3trunkoutstmp + g3trunkoutintvl is less than the current value of the sysUpTime object then the agent refreshes the trunkoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3trunkout 2 } g3trunkoutTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3trunkout 3 } g3trunkoutTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3trunkout 4 } g3trunkoutTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3trunkout 5 } g3trunkoutTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunkoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunkout entries." ::= { g3trunkout 6 } g3trunkoutEntry OBJECT-TYPE SYNTAX G3trunkoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunkout entry containing objects of the g3trunkout information sent by the switch." INDEX { g3trunkoutTrunkGroup, g3trunkoutMember } ::= { g3trunkoutTable 1 } G3trunkoutEntry ::= SEQUENCE { g3trunkoutTrunkGroup INTEGER, g3trunkoutMember INTEGER, g3trunkoutYear INTEGER, g3trunkoutMonth INTEGER, g3trunkoutDay INTEGER, g3trunkoutHour INTEGER, g3trunkoutOutages INTEGER } g3trunkoutTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number." ::= { g3trunkoutEntry 1 } g3trunkoutMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the group member number." ::= { g3trunkoutEntry 2 } g3trunkoutYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3trunkoutEntry 3 } g3trunkoutMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3trunkoutEntry 4 } g3trunkoutDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3trunkoutEntry 5 } g3trunkoutHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3trunkoutEntry 6 } g3trunkoutOutages OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times the group member is sampled as out of service over the measurement period." ::= { g3trunkoutEntry 7 } -- the g3trunklight group g3trunklightTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the lightly used trunk data was last extracted from the switch by the Proxy Agent. This object along with the g3trunklightintvl object allows the Network Manager to determine the validity of the lightly used trunk data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3trunklight 1 } g3trunklightTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the lightly used trunk data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for lightly used trunk objects is received by the agent it uses the g3trunklightage and g3trunklightintvl objects to determine whether it should refresh the cached trunklightTable. If g3trunklightstmp+g3trunklightintvl is less than the current value of the sysUpTime object then the agent refreshes the trunklightTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3trunklight 2 } g3trunklightTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3trunklight 3 } g3trunklightTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3trunklight 4 } g3trunklightTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3trunklight 5 } g3trunklightTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trunklightEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trunklight entries." ::= { g3trunklight 6 } g3trunklightEntry OBJECT-TYPE SYNTAX G3trunklightEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trunklight entry containing objects of the g3trunklight information sent by the switch." INDEX { g3trunklightTrunkGroup, g3trunklightMember } ::= { g3trunklightTable 1 } G3trunklightEntry ::= SEQUENCE { g3trunklightTrunkGroup INTEGER, g3trunklightMember INTEGER, g3trunklightYear INTEGER, g3trunklightMonth INTEGER, g3trunklightDay INTEGER, g3trunklightHour INTEGER, g3trunklightCarried INTEGER } g3trunklightTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the trunk group number." ::= { g3trunklightEntry 1 } g3trunklightMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the group member number." ::= { g3trunklightEntry 2 } g3trunklightYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3trunklightEntry 3 } g3trunklightMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3trunklightEntry 4 } g3trunklightDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3trunklightEntry 5 } g3trunklightHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3trunklightEntry 6 } g3trunklightCarried OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls carried on the trunk member over the measurement interval." ::= { g3trunklightEntry 7 } -- the g3loadtotal group g3loadtotalTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadtotalintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3loadtotal 1 } g3loadtotalTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadtotalage and g3loadtotalintvl objects to determine whether it should refresh the cached loadtotalTable. If g3loadtotalstmp + g3loadtotalintvl is less than the current value of the sysUpTime object then the agent refreshes the loadtotalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3loadtotal 2 } g3loadtotalTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3loadtotal 3 } g3loadtotalTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3loadtotal 4 } g3loadtotalTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3loadtotal 5 } g3loadtotalTable OBJECT-TYPE SYNTAX SEQUENCE OF G3loadtotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3loadtotal entries." ::= { g3loadtotal 6 } g3loadtotalEntry OBJECT-TYPE SYNTAX G3loadtotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3loadtotal entry containing objects of the g3loadtotal information sent by the switch." INDEX { g3loadtotalPNNumber } ::= { g3loadtotalTable 1 } G3loadtotalEntry ::= SEQUENCE { g3loadtotalPNNumber INTEGER, g3loadtotalYear INTEGER, g3loadtotalMonth INTEGER, g3loadtotalDay INTEGER, g3loadtotalHour INTEGER, g3loadtotalPNOccupancy INTEGER, g3loadtotalPNUtil INTEGER, g3loadtotalTDMOccupancy INTEGER, g3loadtotalMeasHour INTEGER } g3loadtotalPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3loadtotalEntry 1 } g3loadtotalYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3loadtotalEntry 2 } g3loadtotalMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3loadtotalEntry 3 } g3loadtotalDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3loadtotalEntry 4 } g3loadtotalHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3loadtotalEntry 5 } g3loadtotalPNOccupancy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of port network link occupancy." ::= { g3loadtotalEntry 6 } g3loadtotalPNUtil OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of the total capacity of the processor on the measured EI board." ::= { g3loadtotalEntry 7 } g3loadtotalTDMOccupancy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time division muliplexed occupancy." ::= { g3loadtotalEntry 8 } g3loadtotalMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3loadtotalEntry 9 } -- the g3loadint group g3loadintTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadintintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3loadint 1 } g3loadintTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadintage and g3loadintintvl objects to determine whether it should refresh the cached loadintTable. If g3loadintstmp + g3loadintintvl is less than the current value of the sysUpTime object then the agent refreshes the loadintTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3loadint 2 } g3loadintTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3loadint 3 } g3loadintTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3loadint 4 } g3loadintTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3loadint 5 } g3loadintTable OBJECT-TYPE SYNTAX SEQUENCE OF G3loadintEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3loadint entries." ::= { g3loadint 6 } g3loadintEntry OBJECT-TYPE SYNTAX G3loadintEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3loadint entry containing objects of the g3loadint information sent by the switch." INDEX { g3loadintPNNumber } ::= { g3loadintTable 1 } G3loadintEntry ::= SEQUENCE { g3loadintPNNumber INTEGER, g3loadintYear INTEGER, g3loadintMonth INTEGER, g3loadintDay INTEGER, g3loadintHour INTEGER, g3loadintIntIntraPNUse INTEGER, g3loadintIntIntraPNPeg INTEGER, g3loadintIntInterPNUse INTEGER, g3loadintIntInterPNPeg INTEGER, g3loadintMeasHour INTEGER } g3loadintPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3loadintEntry 1 } g3loadintYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3loadintEntry 2 } g3loadintMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3loadintEntry 3 } g3loadintDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3loadintEntry 4 } g3loadintHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3loadintEntry 5 } g3loadintIntIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by station-to-station calls between terminals on the same port network (displayed in CCS)." ::= { g3loadintEntry 6 } g3loadintIntIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by station-to-station calls between terminals on the same PN." ::= { g3loadintEntry 7 } g3loadintIntInterPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by station-to-station calls between terminals on different port networks (in CCS)." ::= { g3loadintEntry 8 } g3loadintIntInterPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time slot seizures caused by station-to-station calls between terminals on different PNs." ::= { g3loadintEntry 9 } g3loadintMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3loadintEntry 10 } -- the g3loadinc group g3loadincTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadincintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3loadinc 1 } g3loadincTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadincage and g3loadincintvl objects to determine whether it should refresh the cached loadincTable. If g3loadincstmp + g3loadincintvl is less than the current value of the sysUpTime object then the agent refreshes the loadincTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3loadinc 2 } g3loadincTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3loadinc 3 } g3loadincTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3loadinc 4 } g3loadincTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3loadinc 5 } g3loadincTable OBJECT-TYPE SYNTAX SEQUENCE OF G3loadincEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3loadinc entries." ::= { g3loadinc 6 } g3loadincEntry OBJECT-TYPE SYNTAX G3loadincEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3loadinc entry containing objects of the g3loadinc information sent by the switch." INDEX { g3loadincPNNumber } ::= { g3loadincTable 1 } G3loadincEntry ::= SEQUENCE { g3loadincPNNumber INTEGER, g3loadincYear INTEGER, g3loadincMonth INTEGER, g3loadincDay INTEGER, g3loadincHour INTEGER, g3loadincIncIntraPNUse INTEGER, g3loadincIncIntraPNPeg INTEGER, g3loadincIncIncomingUse INTEGER, g3loadincIncIncomingPeg INTEGER, g3loadincIncOutgoingUse INTEGER, g3loadincIncOutgoingPeg INTEGER, g3loadincMeasHour INTEGER } g3loadincPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3loadincEntry 1 } g3loadincYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3loadincEntry 2 } g3loadincMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3loadincEntry 3 } g3loadincDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3loadincEntry 4 } g3loadincHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3loadincEntry 5 } g3loadincIncIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by incoming trunk calls to a station on the same port network (in CCS)." ::= { g3loadincEntry 6 } g3loadincIncIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by incoming trunk calls to a station on the same port network." ::= { g3loadincEntry 7 } g3loadincIncIncomingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by calls to a station on the port network from an incoming trunk on another port network (in CCS)." ::= { g3loadincEntry 8 } g3loadincIncIncomingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by calls to a station on the port network from an incoming trunk on another port network." ::= { g3loadincEntry 9 } g3loadincIncOutgoingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by calls to a station on another port network from an incoming trunk on the measured port network (in CCS)." ::= { g3loadincEntry 10 } g3loadincIncOutgoingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by calls to a station on another port network from an incoming trunk on the measured port network." ::= { g3loadincEntry 11 } g3loadincMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3loadincEntry 12 } -- the g3loadout group g3loadoutTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3loadoutintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3loadout 1 } g3loadoutTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3loadoutage and g3loadoutintvl objects to determine whether it should refresh the cached loadoutTable. If g3loadoutstmp + g3loadoutintvl is less than the current value of the sysUpTime object then the agent refreshes the loadoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3loadout 2 } g3loadoutTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3loadout 3 } g3loadoutTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3loadout 4 } g3loadoutTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3loadout 5 } g3loadoutTable OBJECT-TYPE SYNTAX SEQUENCE OF G3loadoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3loadout entries." ::= { g3loadout 6 } g3loadoutEntry OBJECT-TYPE SYNTAX G3loadoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3loadout entry containing objects of the g3loadout information sent by the switch." INDEX { g3loadoutPNNumber } ::= { g3loadoutTable 1 } G3loadoutEntry ::= SEQUENCE { g3loadoutPNNumber INTEGER, g3loadoutYear INTEGER, g3loadoutMonth INTEGER, g3loadoutDay INTEGER, g3loadoutHour INTEGER, g3loadoutOutIntraPNUse INTEGER, g3loadoutOutIntraPNPeg INTEGER, g3loadoutOutIncomingUse INTEGER, g3loadoutOutIncomingPeg INTEGER, g3loadoutOutOutgoingUse INTEGER, g3loadoutOutOutgoingPeg INTEGER, g3loadoutMeasHour INTEGER } g3loadoutPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3loadoutEntry 1 } g3loadoutYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3loadoutEntry 2 } g3loadoutMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3loadoutEntry 3 } g3loadoutDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3loadoutEntry 4 } g3loadoutHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3loadoutEntry 5 } g3loadoutOutIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network (in CCS)." ::= { g3loadoutEntry 6 } g3loadoutOutIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network." ::= { g3loadoutEntry 7 } g3loadoutOutIncomingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on another port network but serviced by trunks on the port network being measured (in CCS)." ::= { g3loadoutEntry 8 } g3loadoutOutIncomingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on another port network, but serviced by trunks on the port network being measured." ::= { g3loadoutEntry 9 } g3loadoutOutOutgoingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network (in CCS)." ::= { g3loadoutEntry 10 } g3loadoutOutOutgoingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network." ::= { g3loadoutEntry 11 } g3loadoutMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3loadoutEntry 12 } -- the g3loadtan group g3loadtanTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the tandem load data was last extracted from the switch by the Proxy Agent. This object along with the g3loadtanintvl object allows the Network Manager to determine the validity of the tandem load data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3loadtan 1 } g3loadtanTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the tandem load data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the tandem load objects is received by the agent it uses the g3loadtanage and g3loadtanintvl objects to determine whether it should refresh the cached loadtanTable. If g3loadtanstmp + g3loadtanintvl is less than the current value of the sysUpTime object then the agent refreshes the loadtanTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3loadtan 2 } g3loadtanTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3loadtan 3 } g3loadtanTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3loadtan 4 } g3loadtanTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3loadtan 5 } g3loadtanTable OBJECT-TYPE SYNTAX SEQUENCE OF G3loadtanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3loadtan entries." ::= { g3loadtan 6 } g3loadtanEntry OBJECT-TYPE SYNTAX G3loadtanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3loadtan entry containing objects of the g3loadtan information sent by the switch." INDEX { g3loadtanPNNumber } ::= { g3loadtanTable 1 } G3loadtanEntry ::= SEQUENCE { g3loadtanPNNumber INTEGER, g3loadtanYear INTEGER, g3loadtanMonth INTEGER, g3loadtanDay INTEGER, g3loadtanHour INTEGER, g3loadtanTanIntraPNUse INTEGER, g3loadtanTanIntraPNPeg INTEGER, g3loadtanTanIncomingUse INTEGER, g3loadtanTanIncomingPeg INTEGER, g3loadtanTanOutgoingUse INTEGER, g3loadtanTanOutgoingPeg INTEGER, g3loadtanMeasHour INTEGER } g3loadtanPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3loadtanEntry 1 } g3loadtanYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3loadtanEntry 2 } g3loadtanMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3loadtanEntry 3 } g3loadtanDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3loadtanEntry 4 } g3loadtanHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3loadtanEntry 5 } g3loadtanTanIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM usage caused by tandem trunk calls originating and terminating on the port network being measured (in CCS)." ::= { g3loadtanEntry 6 } g3loadtanTanIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by tandem trunk calls originating and terminating on the port network being measured." ::= { g3loadtanEntry 7 } g3loadtanTanIncomingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM usage resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured (in CCS)." ::= { g3loadtanEntry 8 } g3loadtanTanIncomingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured. that is, the number of times a PN link time-slot is denied." ::= { g3loadtanEntry 9 } g3loadtanTanOutgoingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM usage resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network (in CCS)." ::= { g3loadtanEntry 10 } g3loadtanTanOutgoingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network." ::= { g3loadtanEntry 11 } g3loadtanMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3loadtanEntry 12 } -- the g3pkloadtotal group g3pkloadtotalTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadtotalintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkloadtotal 1 } g3pkloadtotalTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadtotalage and g3pkloadtotalintvl objects to determine whether it should refresh the cached pkloadtotalTable. If g3pkloadtotalstmp + g3pkloadtotalintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadtotalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkloadtotal 2 } g3pkloadtotalTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkloadtotal 3 } g3pkloadtotalTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkloadtotal 4 } g3pkloadtotalTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkloadtotal 5 } g3pkloadtotalTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkloadtotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkloadtotal entries." ::= { g3pkloadtotal 6 } g3pkloadtotalEntry OBJECT-TYPE SYNTAX G3pkloadtotalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkloadtotal entry containing objects of the g3pkloadtotal information sent by the switch." INDEX { g3pkloadtotalPNNumber } ::= { g3pkloadtotalTable 1 } G3pkloadtotalEntry ::= SEQUENCE { g3pkloadtotalPNNumber INTEGER, g3pkloadtotalYear INTEGER, g3pkloadtotalMonth INTEGER, g3pkloadtotalDay INTEGER, g3pkloadtotalHour INTEGER, g3pkloadtotalPNOccupancy INTEGER, g3pkloadtotalPNUtil INTEGER, g3pkloadtotalTDMOccupancy INTEGER, g3pkloadtotalMeasHour INTEGER } g3pkloadtotalPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3pkloadtotalEntry 1 } g3pkloadtotalYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkloadtotalEntry 2 } g3pkloadtotalMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkloadtotalEntry 3 } g3pkloadtotalDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkloadtotalEntry 4 } g3pkloadtotalHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkloadtotalEntry 5 } g3pkloadtotalPNOccupancy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of port network link occupancy." ::= { g3pkloadtotalEntry 6 } g3pkloadtotalPNUtil OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of the total capacity of the processor on the measured EI board (this field no longer is no longer populated)." ::= { g3pkloadtotalEntry 7 } g3pkloadtotalTDMOccupancy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time division muliplexed occupancy." ::= { g3pkloadtotalEntry 8 } g3pkloadtotalMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3pkloadtotalEntry 9 } -- the g3pkloadint group g3pkloadintTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadintintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkloadint 1 } g3pkloadintTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadintage and g3pkloadintintvl objects to determine whether it should refresh the cached pkloadintTable. If g3pkloadintstmp + g3pkloadintintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadintTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkloadint 2 } g3pkloadintTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkloadint 3 } g3pkloadintTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkloadint 4 } g3pkloadintTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkloadint 5 } g3pkloadintTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkloadintEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkloadint entries." ::= { g3pkloadint 6 } g3pkloadintEntry OBJECT-TYPE SYNTAX G3pkloadintEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkloadint entry containing objects of the g3pkloadint information sent by the switch." INDEX { g3pkloadintPNNumber } ::= { g3pkloadintTable 1 } G3pkloadintEntry ::= SEQUENCE { g3pkloadintPNNumber INTEGER, g3pkloadintYear INTEGER, g3pkloadintMonth INTEGER, g3pkloadintDay INTEGER, g3pkloadintHour INTEGER, g3pkloadintIntIntraPNUse INTEGER, g3pkloadintIntIntraPNPeg INTEGER, g3pkloadintIntInterPNUse INTEGER, g3pkloadintIntInterPNPeg INTEGER, g3pkloadintMeasHour INTEGER } g3pkloadintPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3pkloadintEntry 1 } g3pkloadintYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkloadintEntry 2 } g3pkloadintMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkloadintEntry 3 } g3pkloadintDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkloadintEntry 4 } g3pkloadintHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkloadintEntry 5 } g3pkloadintIntIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by station-to-station calls between terminals on the same port network (displayed in CCS)." ::= { g3pkloadintEntry 6 } g3pkloadintIntIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by station-to-station calls between terminals on the same PN." ::= { g3pkloadintEntry 7 } g3pkloadintIntInterPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by station-to-station calls between terminals on different port networks (in CCS)." ::= { g3pkloadintEntry 8 } g3pkloadintIntInterPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time slot seizures caused by station-to-station calls between terminals on different PNs." ::= { g3pkloadintEntry 9 } g3pkloadintMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3pkloadintEntry 10 } -- the g3pkloadinc group g3pkloadincTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadincintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkloadinc 1 } g3pkloadincTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadincage and g3pkloadincintvl objects to determine whether it should refresh the cached pkloadincTable. If g3pkloadincstmp + g3pkloadincintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadincTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkloadinc 2 } g3pkloadincTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkloadinc 3 } g3pkloadincTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkloadinc 4 } g3pkloadincTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkloadinc 5 } g3pkloadincTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkloadincEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkloadinc entries." ::= { g3pkloadinc 6 } g3pkloadincEntry OBJECT-TYPE SYNTAX G3pkloadincEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkloadinc entry containing objects of the g3pkloadinc information sent by the switch." INDEX { g3pkloadincPNNumber } ::= { g3pkloadincTable 1 } G3pkloadincEntry ::= SEQUENCE { g3pkloadincPNNumber INTEGER, g3pkloadincYear INTEGER, g3pkloadincMonth INTEGER, g3pkloadincDay INTEGER, g3pkloadincHour INTEGER, g3pkloadincIncIntraPNUse INTEGER, g3pkloadincIncIntraPNPeg INTEGER, g3pkloadincIncIncomingUse INTEGER, g3pkloadincIncIncomingPeg INTEGER, g3pkloadincIncOutgoingUse INTEGER, g3pkloadincIncOutgoingPeg INTEGER, g3pkloadincMeasHour INTEGER } g3pkloadincPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3pkloadincEntry 1 } g3pkloadincYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkloadincEntry 2 } g3pkloadincMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkloadincEntry 3 } g3pkloadincDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkloadincEntry 4 } g3pkloadincHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkloadincEntry 5 } g3pkloadincIncIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by incoming trunk calls to a station on the same port network (in CCS)." ::= { g3pkloadincEntry 6 } g3pkloadincIncIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by incoming trunk calls to a station on the same port network." ::= { g3pkloadincEntry 7 } g3pkloadincIncIncomingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by calls to a station on the port network from an incoming trunk on another port network (in CCS)." ::= { g3pkloadincEntry 8 } g3pkloadincIncIncomingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by calls to a station on the port network from an incoming trunk on another port network." ::= { g3pkloadincEntry 9 } g3pkloadincIncOutgoingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by calls to a station on another port network from an incoming trunk on the measured port network (in CCS)." ::= { g3pkloadincEntry 10 } g3pkloadincIncOutgoingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by calls to a station on another port network from an incoming trunk on the measured port network." ::= { g3pkloadincEntry 11 } g3pkloadincMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3pkloadincEntry 12 } -- the g3pkloadout group g3pkloadoutTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadoutintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkloadout 1 } g3pkloadoutTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3pkloadoutage and g3pkloadoutintvl objects to determine whether it should refresh the cached pkloadoutTable. If g3pkloadoutstmp + g3pkloadoutintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadoutTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkloadout 2 } g3pkloadoutTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkloadout 3 } g3pkloadoutTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkloadout 4 } g3pkloadoutTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkloadout 5 } g3pkloadoutTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkloadoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkloadout entries." ::= { g3pkloadout 6 } g3pkloadoutEntry OBJECT-TYPE SYNTAX G3pkloadoutEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkloadout entry containing objects of the g3pkloadout information sent by the switch." INDEX { g3pkloadoutPNNumber } ::= { g3pkloadoutTable 1 } G3pkloadoutEntry ::= SEQUENCE { g3pkloadoutPNNumber INTEGER, g3pkloadoutYear INTEGER, g3pkloadoutMonth INTEGER, g3pkloadoutDay INTEGER, g3pkloadoutHour INTEGER, g3pkloadoutOutIntraPNUse INTEGER, g3pkloadoutOutIntraPNPeg INTEGER, g3pkloadoutOutIncomingUse INTEGER, g3pkloadoutOutIncomingPeg INTEGER, g3pkloadoutOutOutgoingUse INTEGER, g3pkloadoutOutOutgoingPeg INTEGER, g3pkloadoutMeasHour INTEGER } g3pkloadoutPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3pkloadoutEntry 1 } g3pkloadoutYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkloadoutEntry 2 } g3pkloadoutMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkloadoutEntry 3 } g3pkloadoutDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkloadoutEntry 4 } g3pkloadoutHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkloadoutEntry 5 } g3pkloadoutOutIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network (in CCS)." ::= { g3pkloadoutEntry 6 } g3pkloadoutOutIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by outgoing calls made by stations on the measured port network and serviced by outgoing trunks on the same port network." ::= { g3pkloadoutEntry 7 } g3pkloadoutOutIncomingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on another port network but serviced by trunks on the port network being measured (in CCS)." ::= { g3pkloadoutEntry 8 } g3pkloadoutOutIncomingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on another port network, but serviced by trunks on the port network being measured." ::= { g3pkloadoutEntry 9 } g3pkloadoutOutOutgoingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM time-slot usage resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network (in CCS)." ::= { g3pkloadoutEntry 10 } g3pkloadoutOutOutgoingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from outgoing calls originated at stations on the port network being measured, but serviced by trunks on another port network." ::= { g3pkloadoutEntry 11 } g3pkloadoutMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3pkloadoutEntry 12 } -- the g3pkloadtan group g3pkloadtanTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak tandem load data was last extracted from the switch by the Proxy Agent. This object along with the g3pkloadtanintvl object allows the Network Manager to determine the validity of the peak tandem load data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkloadtan 1 } g3pkloadtanTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak tandem load objects is received by the agent it uses the g3pkloadtanage and g3pkloadtanintvl objects to determine whether it should refresh the cached pkloadtanTable. If g3pkloadtanstmp + g3pkloadtanintvl is less than the current value of the sysUpTime object then the agent refreshes the pkloadtanTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkloadtan 2 } g3pkloadtanTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkloadtan 3 } g3pkloadtanTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkloadtan 4 } g3pkloadtanTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkloadtan 5 } g3pkloadtanTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkloadtanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkloadtan entries." ::= { g3pkloadtan 6 } g3pkloadtanEntry OBJECT-TYPE SYNTAX G3pkloadtanEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkloadtan entry containing objects of the g3pkloadtan information sent by the switch." INDEX { g3pkloadtanPNNumber } ::= { g3pkloadtanTable 1 } G3pkloadtanEntry ::= SEQUENCE { g3pkloadtanPNNumber INTEGER, g3pkloadtanYear INTEGER, g3pkloadtanMonth INTEGER, g3pkloadtanDay INTEGER, g3pkloadtanHour INTEGER, g3pkloadtanTanIntraPNUse INTEGER, g3pkloadtanTanIntraPNPeg INTEGER, g3pkloadtanTanIncomingUse INTEGER, g3pkloadtanTanIncomingPeg INTEGER, g3pkloadtanTanOutgoingUse INTEGER, g3pkloadtanTanOutgoingPeg INTEGER, g3pkloadtanMeasHour INTEGER } g3pkloadtanPNNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Port Network number." ::= { g3pkloadtanEntry 1 } g3pkloadtanYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkloadtanEntry 2 } g3pkloadtanMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkloadtanEntry 3 } g3pkloadtanDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkloadtanEntry 4 } g3pkloadtanHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkloadtanEntry 5 } g3pkloadtanTanIntraPNUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM usage caused by tandem trunk calls originating and terminating on the port network being measured (in CCS)." ::= { g3pkloadtanEntry 6 } g3pkloadtanTanIntraPNPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures caused by tandem trunk calls originating and terminating on the port network being measured." ::= { g3pkloadtanEntry 7 } g3pkloadtanTanIncomingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM usage resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured (in CCS)." ::= { g3pkloadtanEntry 8 } g3pkloadtanTanIncomingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on another port network, but terminating on the port network being measured." ::= { g3pkloadtanEntry 9 } g3pkloadtanTanOutgoingUse OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the TDM usage resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network (in CCS)." ::= { g3pkloadtanEntry 10 } g3pkloadtanTanOutgoingPeg OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the count of TDM time-slot seizures resulting from tandem trunk calls originating on the port network being measured, but terminating on another port network." ::= { g3pkloadtanEntry 11 } g3pkloadtanMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken." ::= { g3pkloadtanEntry 12 } -- the g3atmlatency group g3atmlatencyTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the atm pnc latency data was last extracted from the switch by the Proxy Agent. This object along with the g3atmlatencyintvl object allows the Network Manager to determine the validity of the atm pnc latency data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3atmlatency 1 } g3atmlatencyTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the atm pnc latency objects is received by the agent it uses the g3atmlatencyage and g3atmlatencyintvl objects to determine whether it should refresh the cached atmlatencyTable. If g3atmlatencystmp + g3atmlatencyintvl is less than the current value of the sysUpTime object then the agent refreshes the atmlatencyTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3atmlatency 2 } g3atmlatencyTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3atmlatency 3 } g3atmlatencyTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3atmlatency 4 } g3atmlatencyTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3atmlatency 5 } g3atmlatencyTable OBJECT-TYPE SYNTAX SEQUENCE OF G3atmlatencyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3atmlatency entries." ::= { g3atmlatency 6 } g3atmlatencyEntry OBJECT-TYPE SYNTAX G3atmlatencyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3atmlatency entry containing objects of the g3atmlatency information sent by the switch." INDEX { g3atmlatencyPNPair } ::= { g3atmlatencyTable 1 } G3atmlatencyEntry ::= SEQUENCE { g3atmlatencyPNPair INTEGER, g3atmlatencyYear INTEGER, g3atmlatencyMonth INTEGER, g3atmlatencyDay INTEGER, g3atmlatencyHour INTEGER, g3atmlatencyPNOrig1 INTEGER, g3atmlatencyPNDest1 INTEGER, g3atmlatencyCount1A INTEGER, g3atmlatencySetup1A INTEGER, g3atmlatencyATMCount1A INTEGER, g3atmlatencyATMSetup1A INTEGER, g3atmlatencyMeasHour1A INTEGER, g3atmlatencyCount1B INTEGER, g3atmlatencySetup1B INTEGER, g3atmlatencyATMCount1B INTEGER, g3atmlatencyATMSetup1B INTEGER, g3atmlatencyMeasHour1B INTEGER } g3atmlatencyPNPair OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the PN Pair." ::= { g3atmlatencyEntry 1 } g3atmlatencyYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3atmlatencyEntry 2 } g3atmlatencyMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3atmlatencyEntry 3 } g3atmlatencyDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3atmlatencyEntry 4 } g3atmlatencyHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3atmlatencyEntry 5 } g3atmlatencyPNOrig1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Originating Port Network for the PN Pair." ::= { g3atmlatencyEntry 6 } g3atmlatencyPNDest1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Originating Port Network for the PN Pair." ::= { g3atmlatencyEntry 7 } g3atmlatencyCount1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of connections for the PN Pair on A-PNC." ::= { g3atmlatencyEntry 8 } g3atmlatencySetup1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on A-PNC." ::= { g3atmlatencyEntry 9 } g3atmlatencyATMCount1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of ATM network connections for the PN Pair on A-PNC." ::= { g3atmlatencyEntry 10 } g3atmlatencyATMSetup1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on A-PNC." ::= { g3atmlatencyEntry 11 } g3atmlatencyMeasHour1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the PN Pair A-PNC measurement was taken." ::= { g3atmlatencyEntry 12 } g3atmlatencyCount1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of connections for the PN Pair on B-PNC." ::= { g3atmlatencyEntry 13 } g3atmlatencySetup1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on B-PNC." ::= { g3atmlatencyEntry 14 } g3atmlatencyATMCount1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of ATM network connections for the PN Pair on B-PNC." ::= { g3atmlatencyEntry 15 } g3atmlatencyATMSetup1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on B-PNC." ::= { g3atmlatencyEntry 16 } g3atmlatencyMeasHour1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the PN Pair B-PNC measurement was taken." ::= { g3atmlatencyEntry 17 } -- the g3pkatmlatency group g3pkatmlatencyTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak atm latency data was last extracted from the switch by the Proxy Agent. This object along with the g3pkatmlatencyintvl object allows the Network Manager to determine the validity of the peak atm latency data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkatmlatency 1 } g3pkatmlatencyTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the peak atm latency data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak atm latency objects is received by the agent it uses the g3pkatmlatencyage and g3pkatmlatencyintvl objects to determine whether it should refresh the cached pkatmlatencyTable. If g3pkatmlatencystmp + g3pkatmlatencyintvl is less than the current value of the sysUpTime object then the agent refreshes the pkatmlatencyTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkatmlatency 2 } g3pkatmlatencyTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkatmlatency 3 } g3pkatmlatencyTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkatmlatency 4 } g3pkatmlatencyTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkatmlatency 5 } g3pkatmlatencyTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkatmlatencyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkatmlatency entries." ::= { g3pkatmlatency 6 } g3pkatmlatencyEntry OBJECT-TYPE SYNTAX G3pkatmlatencyEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkatmlatency entry containing objects of the g3pkatmlatency information sent by the switch." INDEX { g3pkatmlatencyPNPair } ::= { g3pkatmlatencyTable 1 } G3pkatmlatencyEntry ::= SEQUENCE { g3pkatmlatencyPNPair INTEGER, g3pkatmlatencyYear INTEGER, g3pkatmlatencyMonth INTEGER, g3pkatmlatencyDay INTEGER, g3pkatmlatencyHour INTEGER, g3pkatmlatencyPNOrig1 INTEGER, g3pkatmlatencyPNDest1 INTEGER, g3pkatmlatencyCount1A INTEGER, g3pkatmlatencySetup1A INTEGER, g3pkatmlatencyATMCount1A INTEGER, g3pkatmlatencyATMSetup1A INTEGER, g3pkatmlatencyMeasHour1A INTEGER, g3pkatmlatencyCount1B INTEGER, g3pkatmlatencySetup1B INTEGER, g3pkatmlatencyATMCount1B INTEGER, g3pkatmlatencyATMSetup1B INTEGER, g3pkatmlatencyMeasHour1B INTEGER } g3pkatmlatencyPNPair OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the PN Pair." ::= { g3pkatmlatencyEntry 1 } g3pkatmlatencyYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkatmlatencyEntry 2 } g3pkatmlatencyMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkatmlatencyEntry 3 } g3pkatmlatencyDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkatmlatencyEntry 4 } g3pkatmlatencyHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkatmlatencyEntry 5 } g3pkatmlatencyPNOrig1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Originating Port Network for the PN Pair." ::= { g3pkatmlatencyEntry 6 } g3pkatmlatencyPNDest1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "Originating Port Network for the PN Pair." ::= { g3pkatmlatencyEntry 7 } g3pkatmlatencyCount1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of connections for the PN Pair on A-PNC." ::= { g3pkatmlatencyEntry 8 } g3pkatmlatencySetup1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on A-PNC." ::= { g3pkatmlatencyEntry 9 } g3pkatmlatencyATMCount1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of ATM network connections for the PN Pair on A-PNC." ::= { g3pkatmlatencyEntry 10 } g3pkatmlatencyATMSetup1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on A-PNC." ::= { g3pkatmlatencyEntry 11 } g3pkatmlatencyMeasHour1A OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the PN Pair A-PNC measurement was taken." ::= { g3pkatmlatencyEntry 12 } g3pkatmlatencyCount1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of connections for the PN Pair on B-PNC." ::= { g3pkatmlatencyEntry 13 } g3pkatmlatencySetup1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average PN connection setup time (latency) in milliseconds for the PN Pair on B-PNC." ::= { g3pkatmlatencyEntry 14 } g3pkatmlatencyATMCount1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number (count) of ATM network connections for the PN Pair on B-PNC." ::= { g3pkatmlatencyEntry 15 } g3pkatmlatencyATMSetup1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average ATM network connection setup time (latency) in milliseconds for the PN Pair on B-PNC." ::= { g3pkatmlatencyEntry 16 } g3pkatmlatencyMeasHour1B OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the PN Pair B-PNC measurement was taken." ::= { g3pkatmlatencyEntry 17 } -- the g3ipcodecsum group g3ipcodecsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ip codec summary data was last extracted from the switch by the Proxy Agent. This object along with the g3ipcodecsumintvl object allows the Network Manager to determine the validity of the ip codec summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3ipcodecsum 1 } g3ipcodecsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip codec summary objects is received by the agent it uses the g3ipcodecsumage and g3ipcodecsumintvl objects to determine whether it should refresh the cached ipcodecsumTable. If g3ipcodecsumstmp + g3ipcodecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the ipcodecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ipcodecsum 2 } g3ipcodecsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3ipcodecsum 3 } g3ipcodecsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipcodecsum 4 } g3ipcodecsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipcodecsum 5 } g3ipcodecsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipcodecsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipcodecsum entries." ::= { g3ipcodecsum 6 } g3ipcodecsumEntry OBJECT-TYPE SYNTAX G3ipcodecsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipcodecsum entry containing objects of the g3ipcodecsum information sent by the switch." INDEX { g3ipcodecsumRegion } ::= { g3ipcodecsumTable 1 } G3ipcodecsumEntry ::= SEQUENCE { g3ipcodecsumRegion INTEGER, g3ipcodecsumMeasHour INTEGER, g3ipcodecsumYear INTEGER, g3ipcodecsumMonth INTEGER, g3ipcodecsumDay INTEGER, g3ipcodecsumHour INTEGER, g3ipcodecsumDSPRecs INTEGER, g3ipcodecsumG711Usage DisplayString, g3ipcodecsumG711InRegion INTEGER, g3ipcodecsumG711OutRegion INTEGER, g3ipcodecsumG723Usage DisplayString, g3ipcodecsumG723InRegion INTEGER, g3ipcodecsumG723OutRegion INTEGER } g3ipcodecsumRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing The network region that the IP Media Processors and Medpros for this measurement are in. Range: 1-44." ::= { g3ipcodecsumEntry 1 } g3ipcodecsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3ipcodecsumEntry 2 } g3ipcodecsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3ipcodecsumEntry 3 } g3ipcodecsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3ipcodecsumEntry 4 } g3ipcodecsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3ipcodecsumEntry 5 } g3ipcodecsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3ipcodecsumEntry 6 } g3ipcodecsumDSPRecs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total IP codec resources (voice channels) in the region." ::= { g3ipcodecsumEntry 7 } g3ipcodecsumG711Usage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the usage in Erlangs of G.711 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be measured from the time the voice channel is allocated until it is released." ::= { g3ipcodecsumEntry 8 } g3ipcodecsumG711InRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port in the region was allocated to a G.711 call. Range: 0-65535." ::= { g3ipcodecsumEntry 9 } g3ipcodecsumG711OutRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port was needed in the region for a G.711 call, but was successfully allocated to a resource in another region. Out of Region does not include denials." ::= { g3ipcodecsumEntry 10 } g3ipcodecsumG723Usage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the usage in Erlangs of G.723 or G.729 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage is measured from the time the voice channel is allocated until it is released." ::= { g3ipcodecsumEntry 11 } g3ipcodecsumG723InRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port in the region was allocated to a G.723 or G.729 call. Range: 0-65535." ::= { g3ipcodecsumEntry 12 } g3ipcodecsumG723OutRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port was needed in the region for a G.723 or G.729 call, but was successfully allocated to a resource in another region. Out of Region does not include denials." ::= { g3ipcodecsumEntry 13 } -- the g3pkipcodecsum group g3pkipcodecsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak ip codec summary data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipcodecsumintvl object allows the Network Manager to determine the validity of the peak ip codec summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkipcodecsum 1 } g3pkipcodecsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the peak ip codec summary data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak ip codec summary data objects is received by the agent it uses the g3pkipcodecsumage and g3pkipcodecsumintvl objects to determine whether it should refresh the cached pkipcodecsumTable. If g3pkipcodecsumstmp + g3pkipcodecsumintvl is less than the current value of the sysUpTime object then the agent refreshes the pkipcodecsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkipcodecsum 2 } g3pkipcodecsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkipcodecsum 3 } g3pkipcodecsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkipcodecsum 4 } g3pkipcodecsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkipcodecsum 5 } g3pkipcodecsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkipcodecsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkipcodecsum entries." ::= { g3pkipcodecsum 6 } g3pkipcodecsumEntry OBJECT-TYPE SYNTAX G3pkipcodecsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkipcodecsum entry containing objects of the g3pkipcodecsum information sent by the switch." INDEX { g3pkipcodecsumRegion } ::= { g3pkipcodecsumTable 1 } G3pkipcodecsumEntry ::= SEQUENCE { g3pkipcodecsumRegion INTEGER, g3pkipcodecsumMeasHour INTEGER, g3pkipcodecsumYear INTEGER, g3pkipcodecsumMonth INTEGER, g3pkipcodecsumDay INTEGER, g3pkipcodecsumHour INTEGER, g3pkipcodecsumDSPRecs INTEGER, g3pkipcodecsumG711Usage DisplayString, g3pkipcodecsumG711InRegion INTEGER, g3pkipcodecsumG711OutRegion INTEGER, g3pkipcodecsumG723Usage DisplayString, g3pkipcodecsumG723InRegion INTEGER, g3pkipcodecsumG723OutRegion INTEGER } g3pkipcodecsumRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3pkipcodecsumEntry 1 } g3pkipcodecsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3pkipcodecsumEntry 2 } g3pkipcodecsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3pkipcodecsumEntry 3 } g3pkipcodecsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3pkipcodecsumEntry 4 } g3pkipcodecsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3pkipcodecsumEntry 5 } g3pkipcodecsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3pkipcodecsumEntry 6 } g3pkipcodecsumDSPRecs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total IP codec resources (voice channels) in the region" ::= { g3pkipcodecsumEntry 7 } g3pkipcodecsumG711Usage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the usage in Erlangs of G.711 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be measured from the time the voice channel is allocated until it is released" ::= { g3pkipcodecsumEntry 8 } g3pkipcodecsumG711InRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port in the region was allocated to a G.711 call. Range: 0-65535." ::= { g3pkipcodecsumEntry 9 } g3pkipcodecsumG711OutRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port was needed in the region for a G.711 call, but was successfully allocated to a resource in another region. Out of Region does not include denials." ::= { g3pkipcodecsumEntry 10 } g3pkipcodecsumG723Usage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the usage in Erlangs of G.723 or G.729 codecs during the measurement interval. Includes time that the voice channels are on a call. Usage shall be measured from the time the voice channel is allocated until it is released." ::= { g3pkipcodecsumEntry 11 } g3pkipcodecsumG723InRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port in the region was allocated to a G.723 or G.729 call. Range: 0-65535." ::= { g3pkipcodecsumEntry 12 } g3pkipcodecsumG723OutRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port was needed in the region for a G.723 or G.729 call, but was successfully allocated to a resource in another region. Out of Region does not include denials." ::= { g3pkipcodecsumEntry 13 } -- the g3ipregion group g3ipregionTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ip network region data was last extracted from the switch by the Proxy Agent. This object along with the g3ipregionintvl object allows the Network Manager to determine the validity of the ip network region data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3ipregion 1 } g3ipregionTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the ip network region data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip network region objects is received by the agent it uses the g3ipregionage and g3ipregionintvl objects to determine whether it should refresh the cached ipregionTable. If g3ipregionstmp + g3ipregionintvl is less than the current value of the sysUpTime object then the agent refreshes the ipregionTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ipregion 2 } g3ipregionTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3ipregion 3 } g3ipregionTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipregion 4 } g3ipregionTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipregion 5 } g3ipregionTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipregionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipregion entries." ::= { g3ipregion 6 } g3ipregionEntry OBJECT-TYPE SYNTAX G3ipregionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipregion entry containing objects of the g3ipregion information sent by the switch." INDEX { g3ipregionRegion } ::= { g3ipregionTable 1 } G3ipregionEntry ::= SEQUENCE { g3ipregionRegion INTEGER, g3ipregionName DisplayString } g3ipregionRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region of the IP media processors being region number is assigned on the Ip-interfaces screen during switch administration. Range:1-44" ::= { g3ipregionEntry 1 } g3ipregionName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the name of the ip-network region" ::= { g3ipregionEntry 2 } -- the g3ipdspsum group g3ipdspsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ip dsp resource data was last extracted from the switch by the Proxy Agent. This object along with the g3ipdspsumintvl object allows the Network Manager to determine the validity of the ip dsp resource data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3ipdspsum 1 } g3ipdspsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the ip dsp resource data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip dsp resource objects is received by the agent it uses the g3ipdspsumage and g3ipdspsumintvl objects to determine whether it should refresh the cached ipdspsumTable. If g3ipdspsumstmp + g3ipdspsumintvl is less than the current value of the sysUpTime object then the agent refreshes the ipdspsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ipdspsum 2 } g3ipdspsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3ipdspsum 3 } g3ipdspsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipdspsum 4 } g3ipdspsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipdspsum 5 } g3ipdspsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipdspsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipdspsum entries." ::= { g3ipdspsum 6 } g3ipdspsumEntry OBJECT-TYPE SYNTAX G3ipdspsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipdspsum entry containing objects of the g3ipdspsum information sent by the switch." INDEX { g3ipdspsumRegion } ::= { g3ipdspsumTable 1 } G3ipdspsumEntry ::= SEQUENCE { g3ipdspsumRegion INTEGER, g3ipdspsumMeasHour INTEGER, g3ipdspsumYear INTEGER, g3ipdspsumMonth INTEGER, g3ipdspsumDay INTEGER, g3ipdspsumHour INTEGER, g3ipdspsumDSPRecs INTEGER, g3ipdspsumDSPUsage DisplayString, g3ipdspsumInRegion INTEGER, g3ipdspsumOutRegion INTEGER, g3ipdspsumDenied INTEGER, g3ipdspsumPctBlk DisplayString, g3ipdspsumPctOutSrv DisplayString } g3ipdspsumRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region of the IP media processors being measured. The region number is assigned on the Ip-interfaces screen during switch administration.Range:1-44" ::= { g3ipdspsumEntry 1 } g3ipdspsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken" ::= { g3ipdspsumEntry 2 } g3ipdspsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3ipdspsumEntry 3 } g3ipdspsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3ipdspsumEntry 4 } g3ipdspsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3ipdspsumEntry 5 } g3ipdspsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3ipdspsumEntry 6 } g3ipdspsumDSPRecs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of IP codec resources, or voice channels, in the region. Range:0-9999" ::= { g3ipdspsumEntry 7 } g3ipdspsumDSPUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the amount of time (in erlangs) that all codecs were in use during the measurement period. The time is measured from the time the voice channel is allocated until it is released,including the time that the voice channel is on a call. Range:0-9999" ::= { g3ipdspsumEntry 8 } g3ipdspsumInRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port in the region was allocated to a call. Range:0-65535" ::= { g3ipdspsumEntry 9 } g3ipdspsumOutRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port was needed in the region for a call, but was successfully allocated to a resource in another region. Range:0-65535" ::= { g3ipdspsumEntry 10 } g3ipdspsumDenied OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port was needed in the region for a call, but all media ports in all regions were busy and the call did not go through. Range:0-65535" ::= { g3ipdspsumEntry 11 } g3ipdspsumPctBlk OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3ipdspsumEntry 12 } g3ipdspsumPctOutSrv OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3ipdspsumEntry 13 } -- the g3pkipdspsum group g3pkipdspsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak ip dsp resource data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipdspsumintvl object allows the Network Manager to determine the validity of the peak ip dsp resource data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkipdspsum 1 } g3pkipdspsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the peak ip dsp resource data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak ip dsp resource objects is received by the agent it uses the g3pkipdspsumage and g3pkipdspsumintvl objects to determine whether it should refresh the cached pkipdspsumTable. If g3pkipdspsumstmp + g3pkipdspsumintvl is less than the current value of the sysUpTime object then the agent refreshes the pkipdspsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkipdspsum 2 } g3pkipdspsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkipdspsum 3 } g3pkipdspsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkipdspsum 4 } g3pkipdspsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkipdspsum 5 } g3pkipdspsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkipdspsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkipdspsum entries." ::= { g3pkipdspsum 6 } g3pkipdspsumEntry OBJECT-TYPE SYNTAX G3pkipdspsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkipdspsum entry containing objects of the g3pkipdspsum information sent by the switch." INDEX { g3pkipdspsumRegion } ::= { g3pkipdspsumTable 1 } G3pkipdspsumEntry ::= SEQUENCE { g3pkipdspsumRegion INTEGER, g3pkipdspsumMeasHour INTEGER, g3pkipdspsumYear INTEGER, g3pkipdspsumMonth INTEGER, g3pkipdspsumDay INTEGER, g3pkipdspsumHour INTEGER, g3pkipdspsumDSPRecs INTEGER, g3pkipdspsumDSPUsage DisplayString, g3pkipdspsumInRegion INTEGER, g3pkipdspsumOutRegion INTEGER, g3pkipdspsumDenied INTEGER, g3pkipdspsumPctBlk DisplayString, g3pkipdspsumPctOutSrv DisplayString } g3pkipdspsumRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3pkipdspsumEntry 1 } g3pkipdspsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3pkipdspsumEntry 2 } g3pkipdspsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3pkipdspsumEntry 3 } g3pkipdspsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3pkipdspsumEntry 4 } g3pkipdspsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3pkipdspsumEntry 5 } g3pkipdspsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3pkipdspsumEntry 6 } g3pkipdspsumDSPRecs OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing total number of IP codec resources, or voice channels, in the region. Range:0-9999" ::= { g3pkipdspsumEntry 7 } g3pkipdspsumDSPUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing amount of time (in erlangs) that all codecs were in use during the measurement period. The time is measured from the time the voice channel is allocated until it is released,including the time that the voice channel is on a call. Range:0-9999" ::= { g3pkipdspsumEntry 8 } g3pkipdspsumInRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port in the region was allocated to a call.Range:0-65535" ::= { g3pkipdspsumEntry 9 } g3pkipdspsumOutRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an IP media processor port was needed in the region for a call, but was successfully allocated to a resource in another region. Range: 0-65535" ::= { g3pkipdspsumEntry 10 } g3pkipdspsumDenied OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing The total number of times an IP media processor port was needed in the region for a call, but all media ports in all regions were busy and the call did not go through. Range:0-65535" ::= { g3pkipdspsumEntry 11 } g3pkipdspsumPctBlk OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percent of attempted use of IP media processor ports in the region that were not successful (blocked). This percent includes calls that were denied after they were successfully allocated out of the region. " ::= { g3pkipdspsumEntry 12 } g3pkipdspsumPctOutSrv OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percent of CCS time that any IP media processor ports were out of service during the measurement period. This percent includes ports that were manually busied out or maintenance busy during the measured interval." ::= { g3pkipdspsumEntry 13 } -- the g3ipsignal group g3ipsignalTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ip signaling group data was last extracted from the switch by the Proxy Agent. This object along with the g3ipsignalintvl object allows the Network Manager to determine the validity of the ip signaling group data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3ipsignal 1 } g3ipsignalTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the ip signaling group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the ip signaling group objects is received by the agent it uses the g3ipsignalage and g3ipsignalintvl objects to determine whether it should refresh the cached ipsignalTable. If g3ipsignalstmp + g3ipsignalintvl is less than the current value of the sysUpTime object then the agent refreshes the ipsignalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ipsignal 2 } g3ipsignalTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3ipsignal 3 } g3ipsignalTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipsignal 4 } g3ipsignalTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipsignal 5 } g3ipsignalTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipsignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipsignal entries." ::= { g3ipsignal 6 } g3ipsignalEntry OBJECT-TYPE SYNTAX G3ipsignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipsignal entry containing objects of the g3ipsignal information sent by the switch." INDEX { g3ipsignalSigGroup } ::= { g3ipsignalTable 1 } G3ipsignalEntry ::= SEQUENCE { g3ipsignalSigGroup INTEGER, g3ipsignalRegion INTEGER, g3ipsignalYear INTEGER, g3ipsignalMonth INTEGER, g3ipsignalDay INTEGER, g3ipsignalHour INTEGER, g3ipsignalHourAvgLatency INTEGER, g3ipsignalHourPacketsSent INTEGER, g3ipsignalHourPktsLostPct INTEGER, g3ipsignalMeasHour INTEGER, g3ipsignalWorstInterval INTEGER, g3ipsignalIntvlAvgLatency INTEGER, g3ipsignalIntvlPacketsSent INTEGER, g3ipsignalIntvlPktsLostPct INTEGER } g3ipsignalSigGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the ip signaling group number" ::= { g3ipsignalEntry 1 } g3ipsignalRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region of the ip signaling group" ::= { g3ipsignalEntry 2 } g3ipsignalYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3ipsignalEntry 3 } g3ipsignalMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3ipsignalEntry 4 } g3ipsignalDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3ipsignalEntry 5 } g3ipsignalHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3ipsignalEntry 6 } g3ipsignalHourAvgLatency OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average latency for the whole hour" ::= { g3ipsignalEntry 7 } g3ipsignalHourPacketsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of packets sent during the whole hour" ::= { g3ipsignalEntry 8 } g3ipsignalHourPktsLostPct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percent lost packets for the whole hour" ::= { g3ipsignalEntry 9 } g3ipsignalMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3ipsignalEntry 10 } g3ipsignalWorstInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour and worst 3 minute interval within the hour." ::= { g3ipsignalEntry 11 } g3ipsignalIntvlAvgLatency OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average latency for the interval." ::= { g3ipsignalEntry 12 } g3ipsignalIntvlPacketsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of packets sent during the interval." ::= { g3ipsignalEntry 13 } g3ipsignalIntvlPktsLostPct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percent of packets lost for the interval" ::= { g3ipsignalEntry 14 } -- the g3pkipsignal group g3pkipsignalTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak ip signaling group data was last extracted from the switch by the Proxy Agent. This object along with the g3pkipsignalintvl object allows the Network Manager to determine the validity of the peak ip signaling group data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkipsignal 1 } g3pkipsignalTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the peak ip signaling group data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the peak ip signaling group objects is received by the agent it uses the g3pkipsignalage and g3pkipsignalintvl objects to determine whether it should refresh the cached pkipsignalTable. If g3pkipsignalstmp + g3pkipsignalintvl is less than the current value of the sysUpTime object then the agent refreshes the pkipsignalTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkipsignal 2 } g3pkipsignalTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkipsignal 3 } g3pkipsignalTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkipsignal 4 } g3pkipsignalTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkipsignal 5 } g3pkipsignalTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkipsignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkipsignal entries." ::= { g3pkipsignal 6 } g3pkipsignalEntry OBJECT-TYPE SYNTAX G3pkipsignalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkipsignal entry containing objects of the g3pkipsignal information sent by the switch." INDEX { g3pkipsignalSigGroup, g3pkipsignalMeasHour } ::= { g3pkipsignalTable 1 } G3pkipsignalEntry ::= SEQUENCE { g3pkipsignalSigGroup INTEGER, g3pkipsignalRegion INTEGER, g3pkipsignalYear INTEGER, g3pkipsignalMonth INTEGER, g3pkipsignalDay INTEGER, g3pkipsignalHour INTEGER, g3pkipsignalHourAvgLatency INTEGER, g3pkipsignalHourPacketsSent INTEGER, g3pkipsignalHourPktsLostPct INTEGER, g3pkipsignalMeasHour INTEGER, g3pkipsignalWorstInterval INTEGER, g3pkipsignalIntvlAvgLatency INTEGER, g3pkipsignalIntvlPacketsSent INTEGER, g3pkipsignalIntvlPktsLostPct INTEGER } g3pkipsignalSigGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the ip signaling group number" ::= { g3pkipsignalEntry 1 } g3pkipsignalRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region of the ip signaling group" ::= { g3pkipsignalEntry 2 } g3pkipsignalYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3pkipsignalEntry 3 } g3pkipsignalMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3pkipsignalEntry 4 } g3pkipsignalDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3pkipsignalEntry 5 } g3pkipsignalHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3pkipsignalEntry 6 } g3pkipsignalHourAvgLatency OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average latency for the whole hour" ::= { g3pkipsignalEntry 7 } g3pkipsignalHourPacketsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of packets sent during the whole hour" ::= { g3pkipsignalEntry 8 } g3pkipsignalHourPktsLostPct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percent of packets lost for the whole hour" ::= { g3pkipsignalEntry 9 } g3pkipsignalMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3pkipsignalEntry 10 } g3pkipsignalWorstInterval OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour and worst 3 minute interval within the hour" ::= { g3pkipsignalEntry 11 } g3pkipsignalIntvlAvgLatency OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the average latency for the interval" ::= { g3pkipsignalEntry 12 } g3pkipsignalIntvlPacketsSent OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of packets sent during the interval" ::= { g3pkipsignalEntry 13 } g3pkipsignalIntvlPktsLostPct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percent of packets lost for the interval" ::= { g3pkipsignalEntry 14 } -- the g3annall group g3annallTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the announcement data was last extracted from the switch by the Proxy Agent. This object along with the g3annallintvl object allows the Network Manager to determine the validity of the announcement data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3annall 1 } g3annallTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the announcement data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the announcement objects is received by the agent it uses the g3annallage and g3annallintvl objects to determine whether it should refresh the cached annallTable. If g3annallstmp + g3annallintvl is less than the current value of the sysUpTime object then the agent refreshes the annallTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3annall 2 } g3annallTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3annall 3 } g3annallTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3annall 4 } g3annallTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3annall 5 } g3annallTable OBJECT-TYPE SYNTAX SEQUENCE OF G3annallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3annall entries." ::= { g3annall 6 } g3annallEntry OBJECT-TYPE SYNTAX G3annallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3annall entry containing objects of the g3annall information sent by the switch." INDEX { g3annallExtension } ::= { g3annallTable 1 } G3annallEntry ::= SEQUENCE { g3annallAnnNbr INTEGER, g3annallYear INTEGER, g3annallMonth INTEGER, g3annallDay INTEGER, g3annallHour INTEGER, g3annallExtension DisplayString, g3annallName DisplayString, g3annallMeasHour INTEGER, g3annallPlayRequests INTEGER, g3annallCallsQueued INTEGER, g3annallASP INTEGER, g3annallQueueDrops INTEGER, g3annallMPortPlay INTEGER, g3annallMaxPorts INTEGER, g3annallMaxCallers INTEGER } g3annallAnnNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3annallExtension field instead since the announcement number not longer applies in CM starting with CM 4.0." ::= { g3annallEntry 1 } g3annallYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3annallEntry 2 } g3annallMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3annallEntry 3 } g3annallDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3annallEntry 4 } g3annallHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3annallEntry 5 } g3annallExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension number for the announcement" ::= { g3annallEntry 6 } g3annallName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first 24 characters of the announcement" ::= { g3annallEntry 7 } g3annallMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3annallEntry 8 } g3annallPlayRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing total number of calls that requested a play of this announcement during the period" ::= { g3annallEntry 9 } g3annallCallsQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls for an announcement that had to queue waiting for a port during the period" ::= { g3annallEntry 10 } g3annallASP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included" ::= { g3annallEntry 11 } g3annallQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing - count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent" ::= { g3annallEntry 12 } g3annallMPortPlay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing - count of how many times the announcement is being played out of more than one port at the same time during the period" ::= { g3annallEntry 13 } g3annallMaxPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of ports used for the announcement during the period" ::= { g3annallEntry 14 } g3annallMaxCallers OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number callers connected to a port at the same time for this announcement during the period" ::= { g3annallEntry 15 } -- the g3pkannall group g3pkannallTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the announcement data was last extracted from the switch by the Proxy Agent. This object along with the g3pkannallintvl object allows the Network Manager to determine the validity of the announcement data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkannall 1 } g3pkannallTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the Announcement data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the announcement objects is received by the agent it uses the g3pkannallage and g3pkannallintvl objects to determine whether it should refresh the cached pkannallTable. If g3pkannallstmp + g3pkannallintvl is less than the current value of the sysUpTime object then the agent refreshes the pkannallTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkannall 2 } g3pkannallTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkannall 3 } g3pkannallTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkannall 4 } g3pkannallTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkannall 5 } g3pkannallTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkannallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkannall entries." ::= { g3pkannall 6 } g3pkannallEntry OBJECT-TYPE SYNTAX G3pkannallEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkannall entry containing objects of the g3pkannall information sent by the switch." INDEX { g3pkannallExtension } ::= { g3pkannallTable 1 } G3pkannallEntry ::= SEQUENCE { g3pkannallAnnNbr INTEGER, g3pkannallYear INTEGER, g3pkannallMonth INTEGER, g3pkannallDay INTEGER, g3pkannallHour INTEGER, g3pkannallExtension DisplayString, g3pkannallName DisplayString, g3pkannallMeasHour INTEGER, g3pkannallPlayRequests INTEGER, g3pkannallCallsQueued INTEGER, g3pkannallASP INTEGER, g3pkannallQueueDrops INTEGER, g3pkannallMPortPlay INTEGER, g3pkannallMaxPorts INTEGER, g3pkannallMaxCall INTEGER } g3pkannallAnnNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3pkannallExtension field instead since the announcement number not longer applies in CM starting with CM 4.0." ::= { g3pkannallEntry 1 } g3pkannallYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3pkannallEntry 2 } g3pkannallMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3pkannallEntry 3 } g3pkannallDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3pkannallEntry 4 } g3pkannallHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3pkannallEntry 5 } g3pkannallExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension number for the announcement" ::= { g3pkannallEntry 6 } g3pkannallName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first 24 characters of the announcement" ::= { g3pkannallEntry 7 } g3pkannallMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3pkannallEntry 8 } g3pkannallPlayRequests OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing total number of calls that requested a play of this announcement during the period" ::= { g3pkannallEntry 9 } g3pkannallCallsQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing number of calls for an announcement that had to queue waiting for a port during the period" ::= { g3pkannallEntry 10 } g3pkannallASP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included" ::= { g3pkannallEntry 11 } g3pkannallQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent)" ::= { g3pkannallEntry 12 } g3pkannallMPortPlay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing count of how many times the announcement is being played out of more than one port at the same time during the period" ::= { g3pkannallEntry 13 } g3pkannallMaxPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of ports used for the announcement during the period" ::= { g3pkannallEntry 14 } g3pkannallMaxCall OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number callers connected to a port at the same time for this announcement during the period" ::= { g3pkannallEntry 15 } -- the g3anninteg group g3annintegTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3annintegintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3anninteg 1 } g3annintegTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3annintegage and g3annintegintvl objects to determine whether it should refresh the cached annintegTable. If g3annintegstmp + g3annintegintvl is less than the current value of the sysUpTime object then the agent refreshes the annintegTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3anninteg 2 } g3annintegTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3anninteg 3 } g3annintegTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3anninteg 4 } g3annintegTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3anninteg 5 } g3annintegTable OBJECT-TYPE SYNTAX SEQUENCE OF G3annintegEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3anninteg entries." ::= { g3anninteg 6 } g3annintegEntry OBJECT-TYPE SYNTAX G3annintegEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3anninteg entry containing objects of the g3anninteg information sent by the switch." INDEX { g3annintegExtension } ::= { g3annintegTable 1 } G3annintegEntry ::= SEQUENCE { g3annintegBoard DisplayString, g3annintegYear INTEGER, g3annintegMonth INTEGER, g3annintegDay INTEGER, g3annintegHour INTEGER, g3annintegPlayPorts INTEGER, g3annintegMaxCallPeriod INTEGER, g3annintegAllPortsBusy INTEGER, g3annintegAnnNbr INTEGER, g3annintegExtension DisplayString, g3annintegName DisplayString, g3annintegMeasHour INTEGER, g3annintegPlayReqts INTEGER, g3annintegCallsQueued INTEGER, g3annintegASP INTEGER, g3annintegQueueDrops INTEGER, g3annintegMPortPlay INTEGER, g3annintegMaxPorts INTEGER, g3annintegMaxCall INTEGER } g3annintegBoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the board number for the integrated announcement board" ::= { g3annintegEntry 1 } g3annintegYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3annintegEntry 2 } g3annintegMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3annintegEntry 3 } g3annintegDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3annintegEntry 4 } g3annintegHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3annintegEntry 5 } g3annintegPlayPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing " ::= { g3annintegEntry 6 } g3annintegMaxCallPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3annintegEntry 7 } g3annintegAllPortsBusy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing an indication of how frequently the all-ports-busy condition occurs within the period of time" ::= { g3annintegEntry 8 } g3annintegAnnNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3annintegExtension field instead since the announcement number not longer applies in CM starting with CM 4.0." ::= { g3annintegEntry 9 } g3annintegExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension number for the announcement" ::= { g3annintegEntry 10 } g3annintegName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first 24 characters of the announcement" ::= { g3annintegEntry 11 } g3annintegMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3annintegEntry 12 } g3annintegPlayReqts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing total number of calls that requested a play of this announcement during the period" ::= { g3annintegEntry 13 } g3annintegCallsQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing number of calls for an announcement that had to queue waiting for a port during the period" ::= { g3annintegEntry 14 } g3annintegASP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included" ::= { g3annintegEntry 15 } g3annintegQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent" ::= { g3annintegEntry 16 } g3annintegMPortPlay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing count of how many times the announcement is being played out of more than one port at the same time during the period" ::= { g3annintegEntry 17 } g3annintegMaxPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of ports used for the announcement during the period" ::= { g3annintegEntry 18 } g3annintegMaxCall OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number callers connected to a board (sum of the ports) at the same time" ::= { g3annintegEntry 19 } -- the g3pkanninteg group g3pkannintegTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3pkannintegintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkanninteg 1 } g3pkannintegTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3pkannintegage and g3pkannintegintvl objects to determine whether it should refresh the cached pkannintegTable. If g3pkannintegstmp + g3pkannintegintvl is less than the current value of the sysUpTime object then the agent refreshes the pkannintegTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkanninteg 2 } g3pkannintegTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkanninteg 3 } g3pkannintegTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkanninteg 4 } g3pkannintegTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkanninteg 5 } g3pkannintegTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkannintegEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkanninteg entries." ::= { g3pkanninteg 6 } g3pkannintegEntry OBJECT-TYPE SYNTAX G3pkannintegEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkanninteg entry containing objects of the g3pkanninteg information sent by the switch." INDEX { g3pkannintegExtension } ::= { g3pkannintegTable 1 } G3pkannintegEntry ::= SEQUENCE { g3pkannintegBoard DisplayString, g3pkannintegYear INTEGER, g3pkannintegMonth INTEGER, g3pkannintegDay INTEGER, g3pkannintegHour INTEGER, g3pkannintegPlayPorts INTEGER, g3pkannintegMaxCallPeriod INTEGER, g3pkannintegAllPortsBusy INTEGER, g3pkannintegAnnNbr INTEGER, g3pkannintegExtension DisplayString, g3pkannintegName DisplayString, g3pkannintegMeasHour INTEGER, g3pkannintegPlayReqts INTEGER, g3pkannintegCallsQueued INTEGER, g3pkannintegASP INTEGER, g3pkannintegQueueDrops INTEGER, g3pkannintegMPortPlay INTEGER, g3pkannintegMaxPorts INTEGER, g3pkannintegMaxCall INTEGER } g3pkannintegBoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of the integrated announcement board" ::= { g3pkannintegEntry 1 } g3pkannintegYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3pkannintegEntry 2 } g3pkannintegMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3pkannintegEntry 3 } g3pkannintegDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3pkannintegEntry 4 } g3pkannintegHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3pkannintegEntry 5 } g3pkannintegPlayPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of ports on the board which can play the announcements. " ::= { g3pkannintegEntry 6 } g3pkannintegMaxCallPeriod OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Maximum number of Callers on Board in the Period" ::= { g3pkannintegEntry 7 } g3pkannintegAllPortsBusy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing an indication of how frequently the all-ports-busy condition occurs within the period of time" ::= { g3pkannintegEntry 8 } g3pkannintegAnnNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the announcement number. This field is no longer applicable and the table is sorted by the g3pkannintegExtension field instead since the announcement number not longer applies in CM starting with CM 4.0." ::= { g3pkannintegEntry 9 } g3pkannintegExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension number for the announcement" ::= { g3pkannintegEntry 10 } g3pkannintegName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..24)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first 24 characters of the announcement" ::= { g3pkannintegEntry 11 } g3pkannintegMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the measurement was taken" ::= { g3pkannintegEntry 12 } g3pkannintegPlayReqts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing total number of calls that requested a play of this announcement during the period" ::= { g3pkannintegEntry 13 } g3pkannintegCallsQueued OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing number of calls for an announcement that had to queue waiting for a port during the period" ::= { g3pkannintegEntry 14 } g3pkannintegASP OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing from time waiting for announcement to play to when it starts playing in seconds averaged over the period. Calls abandoned while in the waiting for announcement port queue are not to be included" ::= { g3pkannintegEntry 15 } g3pkannintegQueueDrops OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing count of the individual calls that had to queue but dropped while waiting during the period - this includes calls abandoned by the caller and VOA (VDN of origin Announcements) aborts but should exclude calls that were waiting but answered by an agent" ::= { g3pkannintegEntry 16 } g3pkannintegMPortPlay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing count of how many times the announcement is being played out of more than one port at the same time during the period" ::= { g3pkannintegEntry 17 } g3pkannintegMaxPorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number of ports used for the announcement during the period" ::= { g3pkannintegEntry 18 } g3pkannintegMaxCall OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the peak number callers connected to a board (sum of the ports) at the same time" ::= { g3pkannintegEntry 19 } -- the g3nodename group g3nodenameTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the node name data was last extracted from the switch by the Proxy Agent. This object along with the g3nodenameintvl object allows the Network Manager to determine the validity of the node name data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3nodename 1 } g3nodenameTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the node name data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these node name objects is received by the agent it uses the g3nodenameage and g3nodenameintvl objects to determine whether it should refresh the cached nodenameTable. If g3nodenamestmp + g3nodenameintvl is less than the current value of the sysUpTime object then the agent refreshes the nodenameTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3nodename 2 } g3nodenameTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3nodename 3 } g3nodenameTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3nodename 4 } g3nodenameTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3nodename 5 } g3nodenameTable OBJECT-TYPE SYNTAX SEQUENCE OF G3nodenameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3nodename entries." ::= { g3nodename 6 } g3nodenameEntry OBJECT-TYPE SYNTAX G3nodenameEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3nodename entry containing objects of the g3nodename information sent by the switch." INDEX { g3nodenameName } ::= { g3nodenameTable 1 } G3nodenameEntry ::= SEQUENCE { g3nodenameName DisplayString, g3nodenameType DisplayString, g3nodenameIP1 DisplayString, g3nodenameIP2 DisplayString, g3nodenameIP3 DisplayString, g3nodenameIP4 DisplayString } g3nodenameName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the name of the node" ::= { g3nodenameEntry 1 } g3nodenameType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the type of the node" ::= { g3nodenameEntry 2 } g3nodenameIP1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first octet of the IP address" ::= { g3nodenameEntry 3 } g3nodenameIP2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second octet of the IP address" ::= { g3nodenameEntry 4 } g3nodenameIP3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third octet of the IP address" ::= { g3nodenameEntry 5 } g3nodenameIP4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the fourth octet of the IP address" ::= { g3nodenameEntry 6 } -- the g3trkgrpmem group g3trkgrpmemTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the trunk group member data was last extracted from the switch by the Proxy Agent. This object along with the g3trkgrpmemintvl object allows the Network Manager to determine the validity of the trunk group member data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3trkgrpmem 1 } g3trkgrpmemTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the trunk group member data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these trunk group member objects is received by the agent it uses the g3trkgrpmemage and g3trkgrpmemintvl objects to determine whether it should refresh the cached trkgrpmemTable. If g3trkgrpmemstmp + g3trkgrpmemintvl is less than the current value of the sysUpTime object then the agent refreshes the trkgrpmemTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3trkgrpmem 2 } g3trkgrpmemTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3trkgrpmem 3 } g3trkgrpmemTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3trkgrpmem 4 } g3trkgrpmemTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3trkgrpmem 5 } g3trkgrpmemTable OBJECT-TYPE SYNTAX SEQUENCE OF G3trkgrpmemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3trkgrpmem entries." ::= { g3trkgrpmem 6 } g3trkgrpmemEntry OBJECT-TYPE SYNTAX G3trkgrpmemEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3trkgrpmem entry containing objects of the g3trkgrpmem information sent by the switch." INDEX { g3trkgrpmemGroup, g3trkgrpmemMember } ::= { g3trkgrpmemTable 1 } G3trkgrpmemEntry ::= SEQUENCE { g3trkgrpmemGroup INTEGER, g3trkgrpmemMember INTEGER, g3trkgrpmemName DisplayString, g3trkgrpmemType DisplayString, g3trkgrpmemSigGroup DisplayString, g3trkgrpmemPort DisplayString } g3trkgrpmemGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies an administered trunk group." ::= { g3trkgrpmemEntry 1 } g3trkgrpmemMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER Object that uniquely identifies a trunk group member. Trunk group members range from 1 to 666 and exist whether or not they are assigned a port." ::= { g3trkgrpmemEntry 2 } g3trkgrpmemName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the name assigned to the trunk group member." ::= { g3trkgrpmemEntry 3 } g3trkgrpmemType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Type of the trunk group member." ::= { g3trkgrpmemEntry 4 } g3trkgrpmemSigGroup OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Signaling Group assigned to the trunk group member." ::= { g3trkgrpmemEntry 5 } g3trkgrpmemPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies the trunk port based on its location in the system. The syntax for the Port Number is as follows: cabinet(1-22):carrier(A-E):slot(01-20)." ::= { g3trkgrpmemEntry 6 } -- the g3ipinterface group g3ipinterfaceTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ip interface data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ipinterfaceintvl object allows the Network Manager to determine the validity of the ip interface data in the cache and to control when the proxy agent extracts the ip interface data from the switch." ::= { g3ipinterface 1 } g3ipinterfaceTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the ip interface data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for ip interface objects is received by the agent it uses the g3ipinterfaceage and g3ipinterfaceintvl objects to determine whether it should refresh the cached ipinterfaceTable. If g3ipinterfacestmp + g3ipinterfaceintvl is less than the current value of the sysUpTime object then the agent refreshes the ipinterfaceTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ipinterface 2 } g3ipinterfaceTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3ipinterface 3 } g3ipinterfaceTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipinterface 4 } g3ipinterfaceNodeName1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the the node-name for the ip interface" ::= { g3ipinterface 5 } g3ipinterfaceNodeName2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 6 } g3ipinterfaceNodeName3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 7 } g3ipinterfaceNodeName4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 8 } g3ipinterfaceNodeName5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 9 } g3ipinterfaceNodeName6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 10 } g3ipinterfaceNodeName7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 11 } g3ipinterfaceNodeName8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 12 } g3ipinterfaceNodeName9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 13 } g3ipinterfaceNodeName10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 14 } g3ipinterfaceNodeName11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 15 } g3ipinterfaceNodeName12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 16 } g3ipinterfaceNodeName13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 17 } g3ipinterfaceNodeName14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 18 } g3ipinterfaceNodeName15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 19 } g3ipinterfaceNodeName16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 20 } g3ipinterfaceNodeName17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 21 } g3ipinterfaceNodeName18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 22 } g3ipinterfaceNodeName19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 23 } g3ipinterfaceNodeName20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 24 } g3ipinterfaceNodeName21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 25 } g3ipinterfaceNodeName22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 26 } g3ipinterfaceNodeName23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 27 } g3ipinterfaceNodeName24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 28 } g3ipinterfaceNodeName25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 29 } g3ipinterfaceNodeName26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 30 } g3ipinterfaceNodeName27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 31 } g3ipinterfaceNodeName28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 32 } g3ipinterfaceNodeName29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 33 } g3ipinterfaceNodeName30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 34 } g3ipinterfaceNodeName31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 35 } g3ipinterfaceNodeName32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 36 } g3ipinterfaceNodeName33 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 37 } g3ipinterfaceNodeName34 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 38 } g3ipinterfaceNodeName35 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 39 } g3ipinterfaceNodeName36 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 40 } g3ipinterfaceNodeName37 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 41 } g3ipinterfaceNodeName38 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 42 } g3ipinterfaceNodeName39 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 43 } g3ipinterfaceNodeName40 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 44 } g3ipinterfaceNodeName41 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 45 } g3ipinterfaceNodeName42 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 46 } g3ipinterfaceNodeName43 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 47 } g3ipinterfaceNodeName44 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 48 } g3ipinterfaceNodeName45 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 49 } g3ipinterfaceNodeName46 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 50 } g3ipinterfaceNodeName47 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 51 } g3ipinterfaceNodeName48 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 52 } g3ipinterfaceNodeName49 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 53 } g3ipinterfaceNodeName50 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 54 } g3ipinterfaceNodeName51 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 55 } g3ipinterfaceNodeName52 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 56 } g3ipinterfaceNodeName53 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 57 } g3ipinterfaceNodeName54 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 58 } g3ipinterfaceNodeName55 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 59 } g3ipinterfaceNodeName56 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 60 } g3ipinterfaceNodeName57 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 61 } g3ipinterfaceNodeName58 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 62 } g3ipinterfaceNodeName59 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 63 } g3ipinterfaceNodeName60 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 64 } g3ipinterfaceNodeName61 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 65 } g3ipinterfaceNodeName62 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 66 } g3ipinterfaceNodeName63 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 67 } g3ipinterfaceNodeName64 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 68 } g3ipinterfaceNodeName65 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 69 } g3ipinterfaceNodeName66 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 70 } g3ipinterfaceNodeName67 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 71 } g3ipinterfaceNodeName68 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 72 } g3ipinterfaceNodeName69 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 73 } g3ipinterfaceNodeName70 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 74 } g3ipinterfaceNodeName71 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 75 } g3ipinterfaceNodeName72 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 76 } g3ipinterfaceNodeName73 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 77 } g3ipinterfaceNodeName74 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 78 } g3ipinterfaceNodeName75 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 79 } g3ipinterfaceNodeName76 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 80 } g3ipinterfaceNodeName77 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 81 } g3ipinterfaceNodeName78 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 82 } g3ipinterfaceNodeName79 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 83 } g3ipinterfaceNodeName80 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 84 } g3ipinterfaceNodeName81 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 85 } g3ipinterfaceNodeName82 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 86 } g3ipinterfaceNodeName83 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 87 } g3ipinterfaceNodeName84 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 88 } g3ipinterfaceNodeName85 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceNodeName1." ::= { g3ipinterface 89 } g3ipinterfaceSlot1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the the VAL, CLAN or MEDPRO board slot number " ::= { g3ipinterface 90 } g3ipinterfaceSlot2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 91 } g3ipinterfaceSlot3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 92 } g3ipinterfaceSlot4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 93 } g3ipinterfaceSlot5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 94 } g3ipinterfaceSlot6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 95 } g3ipinterfaceSlot7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 96 } g3ipinterfaceSlot8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 97 } g3ipinterfaceSlot9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 98 } g3ipinterfaceSlot10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 99 } g3ipinterfaceSlot11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 100 } g3ipinterfaceSlot12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 101 } g3ipinterfaceSlot13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 102 } g3ipinterfaceSlot14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 103 } g3ipinterfaceSlot15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 104 } g3ipinterfaceSlot16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 105 } g3ipinterfaceSlot17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 106 } g3ipinterfaceSlot18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 107 } g3ipinterfaceSlot19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 108 } g3ipinterfaceSlot20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 109 } g3ipinterfaceSlot21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 110 } g3ipinterfaceSlot22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 111 } g3ipinterfaceSlot23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 112 } g3ipinterfaceSlot24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 113 } g3ipinterfaceSlot25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 114 } g3ipinterfaceSlot26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 115 } g3ipinterfaceSlot27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 116 } g3ipinterfaceSlot28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 117 } g3ipinterfaceSlot29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 118 } g3ipinterfaceSlot30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 119 } g3ipinterfaceSlot31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 120 } g3ipinterfaceSlot32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 121 } g3ipinterfaceSlot33 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 122 } g3ipinterfaceSlot34 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 123 } g3ipinterfaceSlot35 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 124 } g3ipinterfaceSlot36 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 125 } g3ipinterfaceSlot37 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 126 } g3ipinterfaceSlot38 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 127 } g3ipinterfaceSlot39 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 128 } g3ipinterfaceSlot40 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 129 } g3ipinterfaceSlot41 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 130 } g3ipinterfaceSlot42 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 131 } g3ipinterfaceSlot43 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 132 } g3ipinterfaceSlot44 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 133 } g3ipinterfaceSlot45 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 134 } g3ipinterfaceSlot46 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 135 } g3ipinterfaceSlot47 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 136 } g3ipinterfaceSlot48 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 137 } g3ipinterfaceSlot49 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 138 } g3ipinterfaceSlot50 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 139 } g3ipinterfaceSlot51 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 140 } g3ipinterfaceSlot52 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 141 } g3ipinterfaceSlot53 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 142 } g3ipinterfaceSlot54 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 143 } g3ipinterfaceSlot55 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 144 } g3ipinterfaceSlot56 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 145 } g3ipinterfaceSlot57 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 146 } g3ipinterfaceSlot58 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 147 } g3ipinterfaceSlot59 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 148 } g3ipinterfaceSlot60 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 149 } g3ipinterfaceSlot61 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 150 } g3ipinterfaceSlot62 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 151 } g3ipinterfaceSlot63 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 152 } g3ipinterfaceSlot64 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 153 } g3ipinterfaceSlot65 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 154 } g3ipinterfaceSlot66 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 155 } g3ipinterfaceSlot67 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 156 } g3ipinterfaceSlot68 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 157 } g3ipinterfaceSlot69 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 158 } g3ipinterfaceSlot70 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 159 } g3ipinterfaceSlot71 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 160 } g3ipinterfaceSlot72 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 161 } g3ipinterfaceSlot73 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 162 } g3ipinterfaceSlot74 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 163 } g3ipinterfaceSlot75 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 164 } g3ipinterfaceSlot76 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 165 } g3ipinterfaceSlot77 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 166 } g3ipinterfaceSlot78 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 167 } g3ipinterfaceSlot79 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 168 } g3ipinterfaceSlot80 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 169 } g3ipinterfaceSlot81 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 170 } g3ipinterfaceSlot82 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 171 } g3ipinterfaceSlot83 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 172 } g3ipinterfaceSlot84 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 173 } g3ipinterfaceSlot85 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3ipinterfaceSlot1." ::= { g3ipinterface 174 } -- the g3gateway group g3gatewayTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the gateway data was last extracted from the switch by the Proxy Agent. This object along with the g3gatewayintvl object allows the Network Manager to determine the validity of the gateway data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3gateway 1 } g3gatewayTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the gateway data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these gateway objects is received by the agent it uses the g3gatewayage and g3gatewayintvl objects to determine whether it should refresh the cached gatewayTable. If g3gatewaystmp + g3gatewayintvl is less than the current value of the sysUpTime object then the agent refreshes the gatewayTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3gateway 2 } g3gatewayTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3gateway 3 } g3gatewayTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3gateway 4 } g3gatewayTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3gateway 5 } g3gatewayTable OBJECT-TYPE SYNTAX SEQUENCE OF G3gatewayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3gateway entries." ::= { g3gateway 6 } g3gatewayEntry OBJECT-TYPE SYNTAX G3gatewayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3gateway entry containing objects of the g3gateway information sent by the switch." INDEX { g3gatewayNumber } ::= { g3gatewayTable 1 } G3gatewayEntry ::= SEQUENCE { g3gatewayNumber INTEGER, g3gatewayName DisplayString, g3gatewayIdentifier DisplayString, g3gatewayIPAddress DisplayString, g3gatewayMACAddress DisplayString, g3gatewayRegion INTEGER, g3gatewayLocation DisplayString, g3gatewaySiteData1 DisplayString, g3gatewaySiteData2 DisplayString, g3gatewayG700ModTypeV1 DisplayString, g3gatewayG700ModTypeV2 DisplayString, g3gatewayG700ModTypeV3 DisplayString, g3gatewayG700ModTypeV4 DisplayString, g3gatewayG700ModTypeV8 DisplayString, g3gatewayG700ModTypeV9 DisplayString, g3gatewayRegistered DisplayString, g3gatewayType DisplayString, g3gatewayFWVintage DisplayString, g3gatewayHWVintage DisplayString, g3gatewayNearEndIP DisplayString, g3gatewayEncrypt DisplayString, g3gatewayG350ModTypeV1 DisplayString, g3gatewayG350ModTypeV2 DisplayString, g3gatewayG350ModTypeV3 DisplayString, g3gatewayG350ModTypeV4 DisplayString, g3gatewayG350ModTypeV5 DisplayString, g3gatewayG350ModTypeV6 DisplayString, g3gatewayG350ModTypeV7 DisplayString, g3gatewayG350ModTypeV9 DisplayString, g3gatewayRecoveryRule DisplayString, g3gatewayG350ModTypeV8 DisplayString, g3gatewayG450ModTypeV1 DisplayString, g3gatewayG450ModTypeV2 DisplayString, g3gatewayG450ModTypeV3 DisplayString, g3gatewayG450ModTypeV4 DisplayString, g3gatewayG450ModTypeV5 DisplayString, g3gatewayG450ModTypeV6 DisplayString, g3gatewayG450ModTypeV7 DisplayString, g3gatewayG450ModTypeV8 DisplayString, g3gatewayG450ModTypeV9 DisplayString, g3gatewayG250ModTypeV1 DisplayString, g3gatewayG250ModTypeV2 DisplayString, g3gatewayG250ModTypeV3 DisplayString, g3gatewayG250ModTypeV4 DisplayString, g3gatewayG250ModTypeV9 DisplayString, g3gatewayJ6350J4350ModTypeV1 DisplayString, g3gatewayJ6350J4350ModTypeV2 DisplayString, g3gatewayJ6350J4350ModTypeV3 DisplayString, g3gatewayJ6350J4350ModTypeV4 DisplayString, g3gatewayJ6350J4350ModTypeV5 DisplayString, g3gatewayJ6350J4350ModTypeV6 DisplayString, g3gatewayJ6350J4350ModTypeV9 DisplayString, g3gatewayJ2320ModTypeV1 DisplayString, g3gatewayJ2320ModTypeV2 DisplayString, g3gatewayJ2320ModTypeV3 DisplayString, g3gatewayJ2320ModTypeV9 DisplayString, g3gatewayJ2350ModTypeV1 DisplayString, g3gatewayJ2350ModTypeV2 DisplayString, g3gatewayJ2350ModTypeV3 DisplayString, g3gatewayJ2350ModTypeV4 DisplayString, g3gatewayJ2350ModTypeV5 DisplayString, g3gatewayJ2350ModTypeV9 DisplayString } g3gatewayNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Media Gateway number" ::= { g3gatewayEntry 1 } g3gatewayName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Media Gateway name" ::= { g3gatewayEntry 2 } g3gatewayIdentifier OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Media Gateway identifier (either the serial number or other alpha-numeric characters for identification)" ::= { g3gatewayEntry 3 } g3gatewayIPAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IP adrress of the Media Gateway" ::= { g3gatewayEntry 4 } g3gatewayMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the MAC address of the Media Gateway" ::= { g3gatewayEntry 5 } g3gatewayRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region for the Media Gateway" ::= { g3gatewayEntry 6 } g3gatewayLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing information about time-zone offset, daylight savings rule and number plan area code." ::= { g3gatewayEntry 7 } g3gatewaySiteData1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing general site information" ::= { g3gatewayEntry 8 } g3gatewaySiteData2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing general site information" ::= { g3gatewayEntry 9 } g3gatewayG700ModTypeV1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G700 media module slot V1 (if any)." ::= { g3gatewayEntry 10 } g3gatewayG700ModTypeV2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G700 media module slot V2 (if any)." ::= { g3gatewayEntry 11 } g3gatewayG700ModTypeV3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G700 media module slot V3 (if any)." ::= { g3gatewayEntry 12 } g3gatewayG700ModTypeV4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G700 media module slot V4 (if any)." ::= { g3gatewayEntry 13 } g3gatewayG700ModTypeV8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G700 media module slot V8 (if any)." ::= { g3gatewayEntry 14 } g3gatewayG700ModTypeV9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G700 media module slot V9 (if any)." ::= { g3gatewayEntry 15 } g3gatewayRegistered OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing information about whether a Media Gateway is registered with a communications controller." ::= { g3gatewayEntry 16 } g3gatewayType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the type of media gateway (G700 or G350)." ::= { g3gatewayEntry 17 } g3gatewayFWVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..12)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the firmware version of the media gateway processor (for G700) or the single firmware image on the motherboard (for G350). This value may not be available on a G700 with older firmware and is only available if the media gateway is registered. The object contains a set of three numbers in the format xxx.xxx.xxx." ::= { g3gatewayEntry 18 } g3gatewayHWVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware version of the media gateway. This value may not be available for a G700 with older firmware and is only available if th media gateway is registered." ::= { g3gatewayEntry 19 } g3gatewayNearEndIP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IP address of the CLAN or S8300 to which the media gateway is registered." ::= { g3gatewayEntry 20 } g3gatewayEncrypt OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object indicating whether or not the media gateway is using encryption (y or n)." ::= { g3gatewayEntry 21 } g3gatewayG350ModTypeV1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V1 (if any)." ::= { g3gatewayEntry 22 } g3gatewayG350ModTypeV2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V2 (if any)." ::= { g3gatewayEntry 23 } g3gatewayG350ModTypeV3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V3 (if any)." ::= { g3gatewayEntry 24 } g3gatewayG350ModTypeV4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V4 (if any)." ::= { g3gatewayEntry 25 } g3gatewayG350ModTypeV5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V5 (if any)." ::= { g3gatewayEntry 26 } g3gatewayG350ModTypeV6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V6 (if any)." ::= { g3gatewayEntry 27 } g3gatewayG350ModTypeV7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V7 (if any)." ::= { g3gatewayEntry 28 } g3gatewayG350ModTypeV9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V9 (if any)." ::= { g3gatewayEntry 29 } g3gatewayRecoveryRule OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the recovery rule that is to be used by this media gateway for auto fail back to primary; acceptable values are 1-250 or none; the default is none." ::= { g3gatewayEntry 30 } g3gatewayG350ModTypeV8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G350 media module slot V8 (if any)." ::= { g3gatewayEntry 31 } g3gatewayG450ModTypeV1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V1 (if any)." ::= { g3gatewayEntry 32 } g3gatewayG450ModTypeV2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V2 (if any)." ::= { g3gatewayEntry 33 } g3gatewayG450ModTypeV3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V3 (if any)." ::= { g3gatewayEntry 34 } g3gatewayG450ModTypeV4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V4 (if any)." ::= { g3gatewayEntry 35 } g3gatewayG450ModTypeV5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V5 (if any)." ::= { g3gatewayEntry 36 } g3gatewayG450ModTypeV6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V6 (if any)." ::= { g3gatewayEntry 37 } g3gatewayG450ModTypeV7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V7 (if any)." ::= { g3gatewayEntry 38 } g3gatewayG450ModTypeV8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V8 (if any)." ::= { g3gatewayEntry 39 } g3gatewayG450ModTypeV9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G450 media module slot V9 (if any)." ::= { g3gatewayEntry 40 } g3gatewayG250ModTypeV1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G250 media module slot V1 (if any)." ::= { g3gatewayEntry 41 } g3gatewayG250ModTypeV2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G250 media module slot V2 (if any)." ::= { g3gatewayEntry 42 } g3gatewayG250ModTypeV3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G250 media module slot V3 (if any)." ::= { g3gatewayEntry 43 } g3gatewayG250ModTypeV4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G250 media module slot V4 (if any)." ::= { g3gatewayEntry 44 } g3gatewayG250ModTypeV9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the G250 media module slot V9 (if any)." ::= { g3gatewayEntry 45 } g3gatewayJ6350J4350ModTypeV1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J6350 or J4350 media module slot V1 (if any)." ::= { g3gatewayEntry 46 } g3gatewayJ6350J4350ModTypeV2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J6350 or J4350 media module slot V2 (if any)." ::= { g3gatewayEntry 47 } g3gatewayJ6350J4350ModTypeV3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J6350 or J4350 media module slot V3 (if any)." ::= { g3gatewayEntry 48 } g3gatewayJ6350J4350ModTypeV4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J6350 or J4350 media module slot V4 (if any)." ::= { g3gatewayEntry 49 } g3gatewayJ6350J4350ModTypeV5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J6350 or J4350 media module slot V5 (if any)." ::= { g3gatewayEntry 50 } g3gatewayJ6350J4350ModTypeV6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J6350 or J4350 media module slot V6 (if any)." ::= { g3gatewayEntry 51 } g3gatewayJ6350J4350ModTypeV9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J6350 or J4350 media module slot V9 (if any)." ::= { g3gatewayEntry 52 } g3gatewayJ2320ModTypeV1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2320 media module slot V1 (if any)." ::= { g3gatewayEntry 53 } g3gatewayJ2320ModTypeV2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2320 media module slot V2 (if any)." ::= { g3gatewayEntry 54 } g3gatewayJ2320ModTypeV3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2320 media module slot V3 (if any)." ::= { g3gatewayEntry 55 } g3gatewayJ2320ModTypeV9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2320 media module slot V9 (if any)." ::= { g3gatewayEntry 56 } g3gatewayJ2350ModTypeV1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2350 media module slot V1 (if any)." ::= { g3gatewayEntry 57 } g3gatewayJ2350ModTypeV2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2350 media module slot V2 (if any)." ::= { g3gatewayEntry 58 } g3gatewayJ2350ModTypeV3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2350 media module slot V3 (if any)." ::= { g3gatewayEntry 59 } g3gatewayJ2350ModTypeV4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2350 media module slot V4(if any)." ::= { g3gatewayEntry 60 } g3gatewayJ2350ModTypeV5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2350 media module slot V5(if any)." ::= { g3gatewayEntry 61 } g3gatewayJ2350ModTypeV9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..21)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hardware contained in the J2350 media module slot V9 (if any)." ::= { g3gatewayEntry 62 } -- the g3mediacfg group g3mediacfgTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the media config data was extracted from the switch by the G3 Proxy Agent. This object along with the g3mediacfgTintvl object allows the Network Manager to determine the validity of the media config data in the cache and to control when the proxy agent extracts the media config data from the switch." ::= { g3mediacfg 1 } g3mediacfgTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the media config data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for media config objects is received by the agent it uses the g3mediacfgTage and g3mediacfgTintvl objects to determine whether it should refresh the cached mediacfgTable. If g3mediacfgTstmp + g3mediacfgTintvl is less than the current value of the sysUpTime object then the agent refreshes the mediacfgTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3mediacfg 2 } g3mediacfgTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3mediacfg 3 } g3mediacfgTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3mediacfg 4 } g3mediacfgTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3mediacfg 5 } g3mediacfgTable OBJECT-TYPE SYNTAX SEQUENCE OF G3mediacfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3mediacfg entries." ::= { g3mediacfg 6 } g3mediacfgEntry OBJECT-TYPE SYNTAX G3mediacfgEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3mediacfg entry containing objects of the g3mediacfg information sent by the switch." INDEX { g3mediacfgBoardNum } ::= { g3mediacfgTable 1 } G3mediacfgEntry ::= SEQUENCE { g3mediacfgBoardNum DisplayString, g3mediacfgBoardType DisplayString, g3mediacfgCode DisplayString, g3mediacfgVintage DisplayString, g3mediacfgSuffix DisplayString } g3mediacfgBoardNum OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that uniquely identifies a station board based on its location in the system. The syntax for the Board Number is as follows: cabinet(01-44):carrier(A-E):slot(01-20)." ::= { g3mediacfgEntry 1 } g3mediacfgBoardType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..19)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains a text description of the type of media gateway board." ::= { g3mediacfgEntry 2 } g3mediacfgCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the code that defines the type of media gateway board." ::= { g3mediacfgEntry 3 } g3mediacfgVintage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the vintage of the media gateway board." ::= { g3mediacfgEntry 4 } g3mediacfgSuffix OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the suffix to the code" ::= { g3mediacfgEntry 5 } -- the g3stamedia group g3stamediaTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the media gateway status data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamediaintvl object allows the Network Manager to determine the validity of the media gateway status data in the cache and to control when the proxy agent extracts the media gateway status data from the switch." ::= { g3stamedia 1 } g3stamediaTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the media gateway data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for media gateway objects is received by the agent it uses the g3stamediaage and g3stamediaintvl objects to determine whether it should refresh the cached stamediaTable. If g3stamediastmp + g3stamediaintvl is less than the current value of the sysUpTime object then the agent refreshes the stamediaTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3stamedia 2 } g3stamediaTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3stamedia 3 } g3stamediaTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3stamedia 4 } g3stamediaAlarmMajor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of major alarms existing on the media gateways administered in the system." ::= { g3stamedia 5 } g3stamediaAlarmMinor OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of minor alarms existing on the media gateways administered in the system." ::= { g3stamedia 6 } g3stamediaAlarmWarning OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of warnings existing on the media gateways administered in a system." ::= { g3stamedia 7 } g3stamediaBusyOutTrunks OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of busied out trunks existing on the media gateways administered in the system." ::= { g3stamedia 8 } g3stamediaBusyOutStations OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of busied out stations existing on the media gateways administered in the system." ::= { g3stamedia 9 } g3stamediaH248LinksDown OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of media gateways administered in a system that do not have a H.248 link established to the media gateway controller." ::= { g3stamedia 10 } g3stamediaH248LinksUp OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of media gateways administered in a system that do have a H.248 link established to the media gateway controller." ::= { g3stamedia 11 } g3stamediaNbrLogins OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of logins into the system." ::= { g3stamedia 12 } g3stamediaGatewayStatus1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the first set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 13 } g3stamediaGatewayStatus2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus1." ::= { g3stamedia 14 } g3stamediaGatewayStatus3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus1." ::= { g3stamedia 15 } g3stamediaGatewayStatus4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus1." ::= { g3stamedia 16 } g3stamediaGatewayStatus5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus1." ::= { g3stamedia 17 } g3stamediaGatewayStatus6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus1." ::= { g3stamedia 18 } g3stamediaGatewayStatus7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus1." ::= { g3stamedia 19 } g3stamediaGatewayStatus8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus1." ::= { g3stamedia 20 } g3stamediaGatewayStatus9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the second set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 21 } g3stamediaGatewayStatus10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus9." ::= { g3stamedia 22 } g3stamediaGatewayStatus11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus9." ::= { g3stamedia 23 } g3stamediaGatewayStatus12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus9." ::= { g3stamedia 24 } g3stamediaGatewayStatus13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus9." ::= { g3stamedia 25 } g3stamediaGatewayStatus14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus9." ::= { g3stamedia 26 } g3stamediaGatewayStatus15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus9." ::= { g3stamedia 27 } g3stamediaGatewayStatus16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus9." ::= { g3stamedia 28 } g3stamediaGatewayStatus17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the third set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 29 } g3stamediaGatewayStatus18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus17." ::= { g3stamedia 30 } g3stamediaGatewayStatus19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus17." ::= { g3stamedia 31 } g3stamediaGatewayStatus20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus17." ::= { g3stamedia 32 } g3stamediaGatewayStatus21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus17." ::= { g3stamedia 33 } g3stamediaGatewayStatus22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus17." ::= { g3stamedia 34 } g3stamediaGatewayStatus23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus17." ::= { g3stamedia 35 } g3stamediaGatewayStatus24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus17." ::= { g3stamedia 36 } g3stamediaGatewayStatus25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the fourth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 37 } g3stamediaGatewayStatus26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus25." ::= { g3stamedia 38 } g3stamediaGatewayStatus27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus25." ::= { g3stamedia 39 } g3stamediaGatewayStatus28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus25." ::= { g3stamedia 40 } g3stamediaGatewayStatus29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus25." ::= { g3stamedia 41 } g3stamediaGatewayStatus30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus25." ::= { g3stamedia 42 } g3stamediaGatewayStatus31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus25." ::= { g3stamedia 43 } g3stamediaGatewayStatus32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus25." ::= { g3stamedia 44 } g3stamediaGatewayStatus33 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the fifth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 45 } g3stamediaGatewayStatus34 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus33." ::= { g3stamedia 46 } g3stamediaGatewayStatus35 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus33." ::= { g3stamedia 47 } g3stamediaGatewayStatus36 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus33." ::= { g3stamedia 48 } g3stamediaGatewayStatus37 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus33." ::= { g3stamedia 49 } g3stamediaGatewayStatus38 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus33." ::= { g3stamedia 50 } g3stamediaGatewayStatus39 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus33." ::= { g3stamedia 51 } g3stamediaGatewayStatus40 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus33." ::= { g3stamedia 52 } g3stamediaGatewayStatus41 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the sixth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 53 } g3stamediaGatewayStatus42 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus41." ::= { g3stamedia 54 } g3stamediaGatewayStatus43 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus41." ::= { g3stamedia 55 } g3stamediaGatewayStatus44 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus41." ::= { g3stamedia 56 } g3stamediaGatewayStatus45 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus41." ::= { g3stamedia 57 } g3stamediaGatewayStatus46 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus41." ::= { g3stamedia 58 } g3stamediaGatewayStatus47 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus41." ::= { g3stamedia 59 } g3stamediaGatewayStatus48 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus41." ::= { g3stamedia 60 } g3stamediaGatewayStatus49 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the seventh set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 61 } g3stamediaGatewayStatus50 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus49." ::= { g3stamedia 62 } g3stamediaGatewayStatus51 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus49." ::= { g3stamedia 63 } g3stamediaGatewayStatus52 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus49." ::= { g3stamedia 64 } g3stamediaGatewayStatus53 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus49." ::= { g3stamedia 65 } g3stamediaGatewayStatus54 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus49." ::= { g3stamedia 66 } g3stamediaGatewayStatus55 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus49." ::= { g3stamedia 67 } g3stamediaGatewayStatus56 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus49." ::= { g3stamedia 68 } g3stamediaGatewayStatus57 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the eighth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 69 } g3stamediaGatewayStatus58 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus57." ::= { g3stamedia 70 } g3stamediaGatewayStatus59 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus57." ::= { g3stamedia 71 } g3stamediaGatewayStatus60 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus57." ::= { g3stamedia 72 } g3stamediaGatewayStatus61 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus57." ::= { g3stamedia 73 } g3stamediaGatewayStatus62 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus57." ::= { g3stamedia 74 } g3stamediaGatewayStatus63 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus57." ::= { g3stamedia 75 } g3stamediaGatewayStatus64 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus57." ::= { g3stamedia 76 } g3stamediaGatewayStatus65 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the ninth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 77 } g3stamediaGatewayStatus66 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus65." ::= { g3stamedia 78 } g3stamediaGatewayStatus67 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus65." ::= { g3stamedia 79 } g3stamediaGatewayStatus68 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus65." ::= { g3stamedia 80 } g3stamediaGatewayStatus69 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus65." ::= { g3stamedia 81 } g3stamediaGatewayStatus70 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus65." ::= { g3stamedia 82 } g3stamediaGatewayStatus71 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus65." ::= { g3stamedia 83 } g3stamediaGatewayStatus72 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus65." ::= { g3stamedia 84 } g3stamediaGatewayStatus73 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the tenth set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedia 85 } g3stamediaGatewayStatus74 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus73." ::= { g3stamedia 86 } g3stamediaGatewayStatus75 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus73." ::= { g3stamedia 87 } g3stamediaGatewayStatus76 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus73." ::= { g3stamedia 88 } g3stamediaGatewayStatus77 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus73." ::= { g3stamedia 89 } g3stamediaGatewayStatus78 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus73." ::= { g3stamedia 90 } g3stamediaGatewayStatus79 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus73." ::= { g3stamedia 91 } g3stamediaGatewayStatus80 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3stamediaGatewayStatus73." ::= { g3stamedia 92 } -- the g3stamgann group g3stamgannTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the mg-announcment data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamgannintvl object allows the Network Manager to determine the validity of the mg-announcement data in the cache and to control when the proxy agent extracts the mg-announcement data from the switch." ::= { g3stamgann 1 } g3stamgannTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the mg-announcement data extracted from the switch is considered valid by the proxy agent. When a GET or GET-NEXT request for mg-announcement objects is received by the agent it uses the g3stamgannage and g3stamgannintvl objects to determine whether it should refresh the cached stamgannTable. If g3stamgannstmp + g3stamgannintvl is less than the current value of the sysUpTime object then the agent refreshes the stamgannTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3stamgann 2 } g3stamgannTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3stamgann 3 } g3stamgannTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3stamgann 4 } g3stamgannTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3stamgann 5 } g3stamgannTable OBJECT-TYPE SYNTAX SEQUENCE OF G3stamgannEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3stamgann entries." ::= { g3stamgann 6 } g3stamgannEntry OBJECT-TYPE SYNTAX G3stamgannEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3stamgann entry containing objects of the g3stamgann information sent by the switch." INDEX { g3stamgannGatewayNbr } ::= { g3stamgannTable 1 } G3stamgannEntry ::= SEQUENCE { g3stamgannGatewayNbr INTEGER, g3stamgannAnnActive DisplayString } g3stamgannGatewayNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the media gateway number of a G700 media gateway that has the virtual VAL board administered in the V9 slot." ::= { g3stamgannEntry 1 } g3stamgannAnnActive OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the administered virtual VAL board functionality in the Auser maintenance table. The status is active, either yes or no." ::= { g3stamgannEntry 2 } -- the g3ipserver group g3ipserverTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the data was last extracted from the switch by the Proxy Agent. This object along with the g3gatewayTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3ipserver 1 } g3ipserverTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these data objects is received by the agent it uses the g3gatewayTage and g3gatewayTintvl objects to determine whether it should refresh the cached gatewayTable. If g3gatewayTstmp + g3gatewayTintvl is less than the current value of the sysUpTime object then the agent refreshes the gatewayTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3ipserver 2 } g3ipserverTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3ipserver 3 } g3ipserverTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipserver 4 } g3ipserverTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipserver 5 } g3ipserverTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipserverEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipserver entries." ::= { g3ipserver 6 } g3ipserverEntry OBJECT-TYPE SYNTAX G3ipserverEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipserver entry containing objects of the g3ipserver information sent by the switch." INDEX { g3ipserverPortNetwork } ::= { g3ipserverTable 1 } G3ipserverEntry ::= SEQUENCE { g3ipserverPortNetwork INTEGER, g3ipserverSocketEncr DisplayString, g3ipserverSecServer DisplayString, g3ipserverPrimLocation DisplayString, g3ipserverPrimHost DisplayString, g3ipserverPrimDHCPID DisplayString, g3ipserverPrimIP1 DisplayString, g3ipserverPrimIP2 DisplayString, g3ipserverPrimIP3 DisplayString, g3ipserverPrimIP4 DisplayString, g3ipserverPrimIPPort DisplayString, g3ipserverPrimServState DisplayString, g3ipserverPrimCntlState DisplayString, g3ipserverPrimStHealth DisplayString, g3ipserverSecLocation DisplayString, g3ipserverSecHost DisplayString, g3ipserverSecDHCPID DisplayString, g3ipserverSecIP1 DisplayString, g3ipserverSecIP2 DisplayString, g3ipserverSecIP3 DisplayString, g3ipserverSecIP4 DisplayString, g3ipserverSecIPPort DisplayString, g3ipserverSecServState DisplayString, g3ipserverSecCntlState DisplayString, g3ipserverSecStHealth DisplayString, g3ipserverCallCntl802 DisplayString, g3ipserverCallCntlDiff DisplayString } g3ipserverPortNetwork OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the port network number where the ipserver interfaces are inserted" ::= { g3ipserverEntry 1 } g3ipserverSocketEncr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the state of socket encryption for the Server Interface Module (SIM) interface between the server and the IPSI board. Values are y(es) and n(o) for enabling/disabling socket encryption. This is now an obsolete field." ::= { g3ipserverEntry 2 } g3ipserverSecServer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing an indicator as to whether or not a duplicated (secondary) ipserver interface (IPSI) board is administered within a port network. This is now an obsolete field." ::= { g3ipserverEntry 3 } g3ipserverPrimLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A Board Location." ::= { g3ipserverEntry 4 } g3ipserverPrimHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A host name. This field is now obsolete." ::= { g3ipserverEntry 5 } g3ipserverPrimDHCPID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A DHCP ID." ::= { g3ipserverEntry 6 } g3ipserverPrimIP1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A IP address - segment 1." ::= { g3ipserverEntry 7 } g3ipserverPrimIP2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A IP address - segment 2." ::= { g3ipserverEntry 8 } g3ipserverPrimIP3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A IP address - segment 3." ::= { g3ipserverEntry 9 } g3ipserverPrimIP4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A IP address - segment 4." ::= { g3ipserverEntry 10 } g3ipserverPrimIPPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A IP port number. This is now an obsolete field." ::= { g3ipserverEntry 11 } g3ipserverPrimServState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A Service State." ::= { g3ipserverEntry 12 } g3ipserverPrimCntlState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A Control State." ::= { g3ipserverEntry 13 } g3ipserverPrimStHealth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI A State Of Health." ::= { g3ipserverEntry 14 } g3ipserverSecLocation OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B Board Location." ::= { g3ipserverEntry 15 } g3ipserverSecHost OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B Host Name." ::= { g3ipserverEntry 16 } g3ipserverSecDHCPID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B DCHP ID." ::= { g3ipserverEntry 17 } g3ipserverSecIP1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B IP Address - segment 1." ::= { g3ipserverEntry 18 } g3ipserverSecIP2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B IP Address - segment 2." ::= { g3ipserverEntry 19 } g3ipserverSecIP3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B IP Address - segment 3." ::= { g3ipserverEntry 20 } g3ipserverSecIP4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B IP Address - segment 4 ." ::= { g3ipserverEntry 21 } g3ipserverSecIPPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B IP port number. This field is now obsolete." ::= { g3ipserverEntry 22 } g3ipserverSecServState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B Service State" ::= { g3ipserverEntry 23 } g3ipserverSecCntlState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B Control State." ::= { g3ipserverEntry 24 } g3ipserverSecStHealth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the IPSI B State Of Health." ::= { g3ipserverEntry 25 } g3ipserverCallCntl802 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the call control (signaling) 802.1p value for the IPSI board. Default is 6, with a range of 0 to 7. This field is now obsolete." ::= { g3ipserverEntry 26 } g3ipserverCallCntlDiff OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the call control (signaling) DiffServ value for the IPSI board. Default is 40, with a range of 0 to 63. This field is now obsolete." ::= { g3ipserverEntry 27 } -- the g3regipstat group g3regipstatTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the registered ip stations data was last extracted from the switch by the Proxy Agent. This object along with the g3regipstatintvl object allows the Network Manager to determine the validity of the registered ip stations data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3regipstat 1 } g3regipstatTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these registered ip stations data objects is received by the agent it uses the g3regipstatage and g3regipstatintvl objects to determine whether it should refresh the cached regipstatTable. If g3regipstatstmp + g3regipstatintvl is less than the current value of the sysUpTime object then the agent refreshes the regipstatTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3regipstat 2 } g3regipstatTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3regipstat 3 } g3regipstatTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3regipstat 4 } g3regipstatTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3regipstat 5 } g3regipstatTable OBJECT-TYPE SYNTAX SEQUENCE OF G3regipstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3regipstat entries." ::= { g3regipstat 6 } g3regipstatEntry OBJECT-TYPE SYNTAX G3regipstatEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3regipstat entry containing objects of the g3regipstat information sent by the switch." INDEX { g3regipstatExtension } ::= { g3regipstatTable 1 } G3regipstatEntry ::= SEQUENCE { g3regipstatExtension DisplayString } g3regipstatExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the registered IP station extension. This MIB group is currently disabled in providing this data due to performance problems in running the associated CM SAT command." ::= { g3regipstatEntry 1 } -- the g3callratedata group g3callratedataTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratedataTintvl object allows the Network Manager to determine the validity of the call rate data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3callratedata 1 } g3callratedataTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these call rate data objects is received by the agent it uses the g3callratedataTage and g3callratedataTintvl objects to determine whether it should refresh the cached callratedataTable. If g3callratedataTstmp + g3callratedataTintvl is less than the current value of the sysUpTime object then the agent refreshes the callratedataTable cache.In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3callratedata 2 } g3callratedataTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3callratedata 3 } g3callratedataTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3callratedata 4 } g3callratedataRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3callratedata 5 } g3callratedataRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3callratedata 6 } g3callratedataRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3callratedata 7 } g3callratedataRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3callratedata 8 } g3callratedataMeasHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratedata 9 } g3callratedataNumCalls OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. " ::= { g3callratedata 10 } g3callratedataBsyIntHr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratedata 11 } g3callratedataBsyIntMn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratedata 12 } g3callratedataBsyIntSc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratedata 13 } g3callratedataBsyCalCmpl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval." ::= { g3callratedata 14 } g3callratedataMeasHour2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded." ::= { g3callratedata 15 } g3callratedataNumCallsToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratedata 16 } g3callratedataBsyIntHrToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing today's busiest hour.This is the hour with the largest number of completed calls" ::= { g3callratedata 17 } g3callratedataBsyIntMnToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of today's busiest hour" ::= { g3callratedata 18 } g3callratedataBsyIntScToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of today's busiest hour" ::= { g3callratedata 19 } g3callratedataBsyCalCmplToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratedata 20 } g3callratedataMeasHour3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratedata 21 } g3callratedataNumCallsToday1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratedata 22 } g3callratedataBsyIntTodayHr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for today" ::= { g3callratedata 23 } g3callratedataBsyIntTodayMn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for today" ::= { g3callratedata 24 } g3callratedataBsyIntTodaySc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for today" ::= { g3callratedata 25 } g3callratedataBsyCalCmplToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratedata 26 } g3callratedataMeasHour4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock)of the hour during which the data was recorded" ::= { g3callratedata 27 } g3callratedataNumCallsToday3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratedata 28 } g3callratedataBsyIntHrYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls" ::= { g3callratedata 29 } g3callratedataBsyIntMnYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of yesterday's busiest hour" ::= { g3callratedata 30 } g3callratedataBsyIntScYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of yesterday's busiest hour" ::= { g3callratedata 31 } g3callratedataBsyCalCmplYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratedata 32 } g3callratedataMeasHour5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock)of the hour during which the data was recorded" ::= { g3callratedata 33 } g3callratedataNumCallsYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratedata 34 } g3callratedataBsyIntHrYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for yesterday" ::= { g3callratedata 35 } g3callratedataBsyIntMnYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for yesterday" ::= { g3callratedata 36 } g3callratedataBsyIntScYesteday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for yesterday" ::= { g3callratedata 37 } g3callratedataBsyCalCmplYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratedata 38 } -- the g3callratevoice group g3callratevoiceTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratevoiceTintvl object allows the Network Manager to determine the validity of the call rate data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3callratevoice 1 } g3callratevoiceTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent.When a GET or GET-NEXT request for these call rate data objects is received by the agent it uses the g3callratevoiceTage and g3callratevoiceTintvl objects to determine whether it should refresh the cached callratevoiceTable. If g3callratevoiceTstmp + g3callratevoiceTintvl is less than the current value of the sysUpTime object then the agent refreshes the callrayevoiceTable cache.In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3callratevoice 2 } g3callratevoiceTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3callratevoice 3 } g3callratevoiceTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3callratevoice 4 } g3callratevoiceRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3callratevoice 5 } g3callratevoiceRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3callratevoice 6 } g3callratevoiceRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3callratevoice 7 } g3callratevoiceRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3callratevoice 8 } g3callratevoiceMeasHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratevoice 9 } g3callratevoiceNumCalls OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. " ::= { g3callratevoice 10 } g3callratevoiceBsyIntHr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratevoice 11 } g3callratevoiceBsyIntMn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratevoice 12 } g3callratevoiceBsyIntSc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratevoice 13 } g3callratevoiceBsyCalCmpl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval." ::= { g3callratevoice 14 } g3callratevoiceMeasHour2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded." ::= { g3callratevoice 15 } g3callratevoiceNumCallsToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratevoice 16 } g3callratevoiceBsyIntHrToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing today's busiest hour.This is the hour with the largest number of completed calls" ::= { g3callratevoice 17 } g3callratevoiceBsyIntMnToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of today's busiest hour" ::= { g3callratevoice 18 } g3callratevoiceBsyIntScToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of today's busiest hour" ::= { g3callratevoice 19 } g3callratevoiceBsyCalCmplToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratevoice 20 } g3callratevoiceMeasHour3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratevoice 21 } g3callratevoiceNumCallsToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratevoice 22 } g3callratevoiceBsyIntHrToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for today" ::= { g3callratevoice 23 } g3callratevoiceBsyIntMnToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for today" ::= { g3callratevoice 24 } g3callratevoiceBsyIntScToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for today" ::= { g3callratevoice 25 } g3callratevoiceBsyCalCmplToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratevoice 26 } g3callratevoiceMeasHour4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratevoice 27 } g3callratevoiceNumCallsYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratevoice 28 } g3callratevoiceBsyIntHrYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls." ::= { g3callratevoice 29 } g3callratevoiceBsyIntMnYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of yesterday's busiest hour" ::= { g3callratevoice 30 } g3callratevoiceBsyIntScYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of yesterday's busiest hour" ::= { g3callratevoice 31 } g3callratevoiceBsyCalCmplYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratevoice 32 } g3callratevoiceMeasHour5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratevoice 33 } g3callratevoiceNumCallsYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratevoice 34 } g3callratevoiceBsyIntHrYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for yesterday" ::= { g3callratevoice 35 } g3callratevoiceBsyIntMnYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for yesterday." ::= { g3callratevoice 36 } g3callratevoiceBsyIntScYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for yesterday." ::= { g3callratevoice 37 } g3callratevoiceBsyCalCmplYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratevoice 38 } -- the g3callratesrv group g3callratesrvTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent. This object along with the g3callratesrvTintvl object allows the Network Manager to determine the validity of the call rate data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3callratesrv 1 } g3callratesrvTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent.When a GET or GET-NEXT request for these call rate data objects is received by the agent it uses the g3callratesrvTage and g3callratesrvTintvl objects to determine whether it should refresh the cached callratesrvTable.If g3callratesrvTstmp + g3callratesrvTintvl is less than the current value of the sysUpTime object then the agent refreshes the callratesrvTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3callratesrv 2 } g3callratesrvTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3callratesrv 3 } g3callratesrvTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3callratesrv 4 } g3callratesrvRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3callratesrv 5 } g3callratesrvRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3callratesrv 6 } g3callratesrvRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3callratesrv 7 } g3callratesrvRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3callratesrv 8 } g3callratesrvMeasHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratesrv 9 } g3callratesrvNumCalls OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. " ::= { g3callratesrv 10 } g3callratesrvBsyIntHr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratesrv 11 } g3callratesrvBsyIntMn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratesrv 12 } g3callratesrvBsyIntSc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratesrv 13 } g3callratesrvBsyCalCmpl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval." ::= { g3callratesrv 14 } g3callratesrvMeasHour2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded." ::= { g3callratesrv 15 } g3callratesrvNumCallsToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratesrv 16 } g3callratesrvBsyIntHrToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing today's busiest hour.This is the hour with the largest number of completed calls." ::= { g3callratesrv 17 } g3callratesrvBsyIntMnToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of today's busiest hour" ::= { g3callratesrv 18 } g3callratesrvBsyIntScToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of today's busiest hour" ::= { g3callratesrv 19 } g3callratesrvBsyCalCmplToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratesrv 20 } g3callratesrvMeasHour3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratesrv 21 } g3callratesrvNumCallsToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratesrv 22 } g3callratesrvBsyIntHrToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for today" ::= { g3callratesrv 23 } g3callratesrvBsyIntMnToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for today" ::= { g3callratesrv 24 } g3callratesrvBsyIntScToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for today" ::= { g3callratesrv 25 } g3callratesrvBsyCalCmplToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratesrv 26 } g3callratesrvMeasHour4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratesrv 27 } g3callratesrvNumCallsYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratesrv 28 } g3callratesrvBsyIntHrYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls." ::= { g3callratesrv 29 } g3callratesrvBsyIntMnYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of yesterday's busiest hour" ::= { g3callratesrv 30 } g3callratesrvBsyIntScYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of yesterday's busiest hour" ::= { g3callratesrv 31 } g3callratesrvBsyCalCmplYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratesrv 32 } g3callratesrvMeasHour5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratesrv 33 } g3callratesrvNumCallsYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratesrv 34 } g3callratesrvBsyIntHrYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for yesterday." ::= { g3callratesrv 35 } g3callratesrvBsyIntMnYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for yesterday." ::= { g3callratesrv 36 } g3callratesrvBsyIntScYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for yesterday." ::= { g3callratesrv 37 } g3callratesrvBsyCalCmplYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratesrv 38 } -- the g3callratemedia group g3callratemediaTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent.This object along with the g3callratemediaTintvl object allows the Network Manager to determine the validity of the call rate data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3callratemedia 1 } g3callratemediaTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these call rate data objects is received by the agent it uses the g3callratemediaTage and g3callratemediaTintvl objects to determine whether it " ::= { g3callratemedia 2 } g3callratemediaTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3callratemedia 3 } g3callratemediaTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3callratemedia 4 } g3callratemediaRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3callratemedia 5 } g3callratemediaRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3callratemedia 6 } g3callratemediaRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3callratemedia 7 } g3callratemediaRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3callratemedia 8 } g3callratemediaMeasHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratemedia 9 } g3callratemediaNumCalls OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour. " ::= { g3callratemedia 10 } g3callratemediaBsyIntHr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratemedia 11 } g3callratemediaBsyIntMn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratemedia 12 } g3callratemediaBsyIntSc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratemedia 13 } g3callratemediaBsyCalCmpl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval." ::= { g3callratemedia 14 } g3callratemediaMeasHour2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded." ::= { g3callratemedia 15 } g3callratemediaNumCallsToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratemedia 16 } g3callratemediaBsyIntHrToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing today's busiest hour.This is the hour with the largest number of completed calls." ::= { g3callratemedia 17 } g3callratemediaBsyIntMnToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of today's busiest hour" ::= { g3callratemedia 18 } g3callratemediaBsyIntScToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of today's busiest hour" ::= { g3callratemedia 19 } g3callratemediaBsyCalCmplToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratemedia 20 } g3callratemediaMeasHour3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratemedia 21 } g3callratemediaNumCallsToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratemedia 22 } g3callratemediaBsyIntHrToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for today" ::= { g3callratemedia 23 } g3callratemediaBsyIntMnToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for today" ::= { g3callratemedia 24 } g3callratemediaBsyIntScToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for today" ::= { g3callratemedia 25 } g3callratemediaBsyCalCmplToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratemedia 26 } g3callratemediaMeasHour4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratemedia 27 } g3callratemediaNumCallsYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratemedia 28 } g3callratemediaBsyIntHrYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls." ::= { g3callratemedia 29 } g3callratemediaBsyIntMnYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of yesterday's busiest hour" ::= { g3callratemedia 30 } g3callratemediaBsyIntScYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of yesterday's busiest hour" ::= { g3callratemedia 31 } g3callratemediaBsyCalCmplYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratemedia 32 } g3callratemediaMeasHour5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratemedia 33 } g3callratemediaNumCallsYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratemedia 34 } g3callratemediaBsyIntHrYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for yesterday" ::= { g3callratemedia 35 } g3callratemediaBsyIntMnYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for yesterday" ::= { g3callratemedia 36 } g3callratemediaBsyIntScYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for yesterday" ::= { g3callratemedia 37 } g3callratemediaBsyCalCmplYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratemedia 38 } -- the g3callratetotal group g3callratetotalTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the call rate data was last extracted from the switch by the Proxy Agent.This object along with the g3callratedataTintvl object allows the Network Manager to determine the validity of the call rate data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3callratetotal 1 } g3callratetotalTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these call rate data objects is received by the agent it uses the g3callratetotalTage and g3callratetotalTintvl objects to determine whether it should refresh the cached callratetotalTable. If g3callratetotalTstmp + g3callratetotalTintvl is less than the current value of the sysUpTime object then the agent refreshes the callratetotalTable cache.In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3callratetotal 2 } g3callratetotalTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3callratetotal 3 } g3callratetotalTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3callratetotal 4 } g3callratetotalRunYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3callratetotal 5 } g3callratetotalRunMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3callratetotal 6 } g3callratetotalRunDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3callratetotal 7 } g3callratetotalRunHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3callratetotal 8 } g3callratetotalMeasHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratetotal 9 } g3callratetotalNumCalls OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed or answered (including incoming, outgoing, and intercom),during the listed hour. " ::= { g3callratetotal 10 } g3callratetotalBsyIntHr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratetotal 11 } g3callratetotalBsyIntMn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratetotal 12 } g3callratetotalBsyIntSc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing" ::= { g3callratetotal 13 } g3callratetotalBsyCalCmpl OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval." ::= { g3callratetotal 14 } g3callratetotalMeasHour2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded." ::= { g3callratetotal 15 } g3callratetotalNumCallsToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratetotal 16 } g3callratetotalBsyIntHrToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing today's busiest hour.This is the hour with the largest number of completed calls." ::= { g3callratetotal 17 } g3callratetotalBsyIntMnToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of today's busiest hour" ::= { g3callratetotal 18 } g3callratetotalBsyIntScToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of today's busiest hour" ::= { g3callratetotal 19 } g3callratetotalBsyCalCmplToday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratetotal 20 } g3callratetotalMeasHour3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratetotal 21 } g3callratetotalNumCallsToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratetotal 22 } g3callratetotalBsyIntHrToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour field of the hour with the busiest 36-second interval for today." ::= { g3callratetotal 23 } g3callratetotalBsyIntMnToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for today." ::= { g3callratetotal 24 } g3callratetotalBsyIntScToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for today." ::= { g3callratetotal 25 } g3callratetotalBsyCalCmplToday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratetotal 26 } g3callratetotalMeasHour4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratetotal 27 } g3callratetotalNumCallsYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratetotal 28 } g3callratetotalBsyIntHrYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing yesterday's busiest hour.This is the hour with the largest number of completed calls." ::= { g3callratetotal 29 } g3callratetotalBsyIntMnYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of yesterday's busiest hour" ::= { g3callratetotal 30 } g3callratetotalBsyIntScYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of yesterday's busiest hour" ::= { g3callratetotal 31 } g3callratetotalBsyCalCmplYesterday OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratetotal 32 } g3callratetotalMeasHour5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time (using 24-hour clock) of the hour during which the data was recorded" ::= { g3callratetotal 33 } g3callratetotalNumCallsYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "The number of calls completed,or answered (including incoming, outgoing, and intercom),during the listed hour" ::= { g3callratetotal 34 } g3callratetotalBsyIntHrYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour with the busiest 36-second interval for yesterday." ::= { g3callratetotal 35 } g3callratetotalBsyIntMnYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute field of the hour with the busiest 36-second interval for yesterday." ::= { g3callratetotal 36 } g3callratetotalBsyIntScYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second field of the hour with the busiest 36-second interval for yesterday." ::= { g3callratetotal 37 } g3callratetotalBsyCalCmplYesterday2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls completed in the listed busy interval" ::= { g3callratetotal 38 } -- the g3clansocsum group g3clansocsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the clan sockets summary data was last extracted from the switch by the Proxy Agent.This object along with the g3clansocsumTintvl object allows the Network Manager to determine the validity of the clan socket data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3clansocsum 1 } g3clansocsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these clan sockets data objects is received by the agent it uses the g3clansocsumTage and g3clansocsumTintvl objects to determine whether it should refresh the cached clansocsumTable. If g3clansocsumTstmp + g3clansocsumTintvl is less than the current value of the sysUpTime object then the agent refreshes the clansocsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3clansocsum 2 } g3clansocsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3clansocsum 3 } g3clansocsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3clansocsum 4 } g3clansocsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3clansocsum 5 } g3clansocsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3clansocsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3clansocsum entries." ::= { g3clansocsum 6 } g3clansocsumEntry OBJECT-TYPE SYNTAX G3clansocsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3clansocsum entry containing objects of the g3clansocsum information sent by the switch." INDEX { g3clansocsumBoard } ::= { g3clansocsumTable 1 } G3clansocsumEntry ::= SEQUENCE { g3clansocsumBoard DisplayString, g3clansocsumMeasHour DisplayString, g3clansocsumYear INTEGER, g3clansocsumMonth INTEGER, g3clansocsumDay INTEGER, g3clansocsumHour INTEGER, g3clansocsumRegion DisplayString, g3clansocsumSockusage DisplayString, g3clansocsumSockPeg DisplayString, g3clansocsumDenialPeg DisplayString, g3clansocsumPctDenial DisplayString, g3clansocsumPcttmASB DisplayString } g3clansocsumBoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the cabinet, carrier, and slot for the specified board" ::= { g3clansocsumEntry 1 } g3clansocsumMeasHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken" ::= { g3clansocsumEntry 2 } g3clansocsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3clansocsumEntry 3 } g3clansocsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3clansocsumEntry 4 } g3clansocsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3clansocsumEntry 5 } g3clansocsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3clansocsumEntry 6 } g3clansocsumRegion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region that the CLAN for this measurement is in. Range: 1-44" ::= { g3clansocsumEntry 7 } g3clansocsumSockusage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in Erlangs, that is available from sockets on this C-lan board. Calculated by: (Total Socket Seconds of usage) / 3600. Range: 0-9999.9." ::= { g3clansocsumEntry 8 } g3clansocsumSockPeg OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a C-lan socket on the board was allocated to a call or link. Range: 0-65535" ::= { g3clansocsumEntry 9 } g3clansocsumDenialPeg OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a C-lan socket on the board was needed for a call or link, but was not available. Range: 0-65535" ::= { g3clansocsumEntry 10 } g3clansocsumPctDenial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing (Socket Denial peg)/(Socket Denial peg + Socket peg). Range: 0-99" ::= { g3clansocsumEntry 11 } g3clansocsumPcttmASB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all C-lan sockets on the board were unavailable for use. Range: 0-99" ::= { g3clansocsumEntry 12 } -- the g3pkclansocsum group g3pkclansocsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the clan sockets summary data was last extracted from the switch by the Proxy Agent. This object along with the g3clansumintvl object allows the Network Manager to determine the validity of the clan socket summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkclansocsum 1 } g3pkclansocsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these clan socket sumary data objects is received by the agent it uses the g3clansocsumTage and g3clansocsumTintvl objects to determine whether it should refresh the cached clansocsumTable. If g3clasocsumTstmp + g3clansocsumTintvl is less than the current value of the sysUpTime object then the agent refreshes the clansocsumTable cache. In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3pkclansocsum 2 } g3pkclansocsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkclansocsum 3 } g3pkclansocsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3pkclansocsum 4 } g3pkclansocsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkclansocsum 5 } g3pkclansocsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkclansocsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkclansocsum entries." ::= { g3pkclansocsum 6 } g3pkclansocsumEntry OBJECT-TYPE SYNTAX G3pkclansocsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkclansocsum entry containing objects of the g3pkclansocsum information sent by the switch." INDEX { g3pkclansocsumBoard } ::= { g3pkclansocsumTable 1 } G3pkclansocsumEntry ::= SEQUENCE { g3pkclansocsumBoard DisplayString, g3pkclansocsumMeasHour DisplayString, g3pkclansocsumYear INTEGER, g3pkclansocsumMonth INTEGER, g3pkclansocsumDay INTEGER, g3pkclansocsumHour INTEGER, g3pkclansocsumRegion DisplayString, g3pkclansocsumSockusage DisplayString, g3pkclansocsumSockPeg DisplayString, g3pkclansocsumDenialPeg DisplayString, g3pkclansocsumPctDenial DisplayString, g3pkclansocsumPcttmASB DisplayString } g3pkclansocsumBoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the cabinet, carrier, and slot for the specified board" ::= { g3pkclansocsumEntry 1 } g3pkclansocsumMeasHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour the measurement was taken" ::= { g3pkclansocsumEntry 2 } g3pkclansocsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3pkclansocsumEntry 3 } g3pkclansocsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3pkclansocsumEntry 4 } g3pkclansocsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3pkclansocsumEntry 5 } g3pkclansocsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3pkclansocsumEntry 6 } g3pkclansocsumRegion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region that the CLAN for this measurement is in. Range: 1-44" ::= { g3pkclansocsumEntry 7 } g3pkclansocsumSockusage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in Erlangs, that is available from sockets on this C-lan board. Calculated by: (Total Socket Seconds of usage) / 3600. Range: 0-9999.9." ::= { g3pkclansocsumEntry 8 } g3pkclansocsumSockPeg OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a C-lan socket on the board was allocated to a call or link. Range: 0-65535" ::= { g3pkclansocsumEntry 9 } g3pkclansocsumDenialPeg OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a C-lan socket on the board was needed for a call or link, but was not available. Range: 0-65535" ::= { g3pkclansocsumEntry 10 } g3pkclansocsumPctDenial OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing (Socket Denial peg)/(Socket Denial peg + Socket peg). Range: 0-99" ::= { g3pkclansocsumEntry 11 } g3pkclansocsumPcttmASB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all C-lan sockets on the board were unavailable for use. Range: 0-99" ::= { g3pkclansocsumEntry 12 } -- the g3clanether group g3clanetherTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the clan ethernet data was last extracted from the switch by the Proxy Agent.This object along with the g3clanetherTintvl object allows the Network Manager to determine the validity of the clan ethernet data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3clanether 1 } g3clanetherTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these clan ethernet data objects is received by the agent it uses the g3clanetherTage and g3clanetherTintvl objects to determine whether it should refresh the cached clanetherTable. If g3clanetherTstmp + g3clanetherTintvl is less than the current value of the sysUpTime object then the agent refreshes the clanetherTable cache.In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3clanether 2 } g3clanetherTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3clanether 3 } g3clanetherTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3clanether 4 } g3clanetherTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3clanether 5 } g3clanetherTable OBJECT-TYPE SYNTAX SEQUENCE OF G3clanetherEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3clanether entries." ::= { g3clanether 6 } g3clanetherEntry OBJECT-TYPE SYNTAX G3clanetherEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3clanether entry containing objects of the g3clanether information sent by the switch." INDEX { g3clanetherKey, g3clanetherDate, g3clanetherTime } ::= { g3clanetherTable 1 } G3clanetherEntry ::= SEQUENCE { g3clanetherKey DisplayString, g3clanetherYear INTEGER, g3clanetherMonth INTEGER, g3clanetherDay INTEGER, g3clanetherHour INTEGER, g3clanetherDate DisplayString, g3clanetherTime INTEGER, g3clanetherCrcChkTot DisplayString, g3clanetherCrcChkDelta DisplayString, g3clanetherCollCntTot DisplayString, g3clanetherCollCntDelta DisplayString } g3clanetherKey OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the index key" ::= { g3clanetherEntry 1 } g3clanetherYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3clanetherEntry 2 } g3clanetherMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3clanetherEntry 3 } g3clanetherDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3clanetherEntry 4 } g3clanetherHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3clanetherEntry 5 } g3clanetherDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the date that the data was collected" ::= { g3clanetherEntry 6 } g3clanetherTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the current 15-minute interval in which the action was performed" ::= { g3clanetherEntry 7 } g3clanetherCrcChkTot OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total error count for CRC errors" ::= { g3clanetherEntry 8 } g3clanetherCrcChkDelta OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the difference between the current and the previous sample for CRC errors" ::= { g3clanetherEntry 9 } g3clanetherCollCntTot OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the error count for collisions on the ethernet" ::= { g3clanetherEntry 10 } g3clanetherCollCntDelta OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the difference between the current and previous samples for the error count for collisions on the ethernet" ::= { g3clanetherEntry 11 } -- the g3clanppp group g3clanpppTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the clan ppp data was last extracted from the switch by the Proxy Agent. This object along with the g3clanpppTintvl object allows the Network Manager to determine the validity of the clan ppp data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3clanppp 1 } g3clanpppTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these clan ppp data objects is received by the agent it uses the g3clanpppTage and g3clanpppTintvl objects to determine whether it should refresh the cached clanpppTable. If g3clanpppTstmp + g3clanpppTintvl is less than the current value of the sysUpTime object then the agent refreshes the clanpppTable cache.In either case it responds to the requests it receives with the data it currently has in the cache." ::= { g3clanppp 2 } g3clanpppTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3clanppp 3 } g3clanpppTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3clanppp 4 } g3clanpppTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3clanppp 5 } g3clanpppTable OBJECT-TYPE SYNTAX SEQUENCE OF G3clanpppEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3clanppp entries." ::= { g3clanppp 6 } g3clanpppEntry OBJECT-TYPE SYNTAX G3clanpppEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3clanppp entry containing objects of the g3clanppp information sent by the switch." INDEX { g3clanpppKey, g3clanpppDate, g3clanpppTime } ::= { g3clanpppTable 1 } G3clanpppEntry ::= SEQUENCE { g3clanpppKey DisplayString, g3clanpppYear INTEGER, g3clanpppMonth INTEGER, g3clanpppDay INTEGER, g3clanpppHour INTEGER, g3clanpppDate DisplayString, g3clanpppTime INTEGER, g3clanpppCrcChkTot DisplayString, g3clanpppCrcChkDelta DisplayString, g3clanpppInvFrameTot DisplayString, g3clanpppInvFrameDelta DisplayString, g3clanpppChapFailTot DisplayString, g3clanpppChapFailDelta DisplayString } g3clanpppKey OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the index key" ::= { g3clanpppEntry 1 } g3clanpppYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed" ::= { g3clanpppEntry 2 } g3clanpppMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed" ::= { g3clanpppEntry 3 } g3clanpppDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed" ::= { g3clanpppEntry 4 } g3clanpppHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed" ::= { g3clanpppEntry 5 } g3clanpppDate OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the date that the data was collected" ::= { g3clanpppEntry 6 } g3clanpppTime OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the current 15-minute interval in which the action was performed" ::= { g3clanpppEntry 7 } g3clanpppCrcChkTot OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total error count for CRC errors" ::= { g3clanpppEntry 8 } g3clanpppCrcChkDelta OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the difference between the current and the previous sample for CRC errors" ::= { g3clanpppEntry 9 } g3clanpppInvFrameTot OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of invalid frames detected. Invalid frames are the frames that are misaligned." ::= { g3clanpppEntry 10 } g3clanpppInvFrameDelta OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the difference between the Invalid frames count between the current and previous samples for Invalid frames count" ::= { g3clanpppEntry 11 } g3clanpppChapFailTot OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of failed attempts for ppp authentication" ::= { g3clanpppEntry 12 } g3clanpppChapFailDelta OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the difference betwen the current and previous sample for number of failed" ::= { g3clanpppEntry 13 } -- the g3mmisum group g3mmisumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the hourly multimedia interface traffic (MMI) summary data was last extracted from the switch by the Proxy Agent. This object along with the g3mmisumTintvl object allows the Network Manager to determine the validity of the hourly MMI summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3mmisum 1 } g3mmisumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these hourly MMI summary objects is received by the agent it uses the g3mmisumTage and g3mmisumTintvl objects to determine whether it should refresh the cached hourly MMI summary data." ::= { g3mmisum 2 } g3mmisumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3mmisum 3 } g3mmisumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3mmisum 4 } g3mmisumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3mmisum 5 } g3mmisumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3mmisumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3mmisum entries." ::= { g3mmisum 6 } g3mmisumEntry OBJECT-TYPE SYNTAX G3mmisumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3mmisum entry containing objects of the g3mmisum information sent by the switch." INDEX { g3mmisumMeasHour } ::= { g3mmisumTable 1 } G3mmisumEntry ::= SEQUENCE { g3mmisumMeasHour INTEGER, g3mmisumYear INTEGER, g3mmisumMonth INTEGER, g3mmisumDay INTEGER, g3mmisumHour INTEGER, g3mmisumAvailablePorts INTEGER, g3mmisumAvailableUsage DisplayString, g3mmisumTotalUsage DisplayString, g3mmisumTotalAllocation INTEGER, g3mmisumMMIDenials INTEGER, g3mmisumOutofService INTEGER, g3mmisumPercentAPB DisplayString, g3mmisumPercentBlock DisplayString } g3mmisumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour for which these measurements apply (based on a 24-hour clock)." ::= { g3mmisumEntry 1 } g3mmisumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3mmisumEntry 2 } g3mmisumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3mmisumEntry 3 } g3mmisumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3mmisumEntry 4 } g3mmisumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3mmisumEntry 5 } g3mmisumAvailablePorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total network MMI ports in the system (does not include any MMIs that are cabled to an ESM)." ::= { g3mmisumEntry 6 } g3mmisumAvailableUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that is available in the system for network MMI ports (in CCS units)." ::= { g3mmisumEntry 7 } g3mmisumTotalUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance busy. Usage is measured from the time the port is allocated until it is released." ::= { g3mmisumEntry 8 } g3mmisumTotalAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times that an MMI port was allocated to a call. Keep in mind that a 2-channel call occupies 2 ports, so this number does not necessarily reflect the number of calls that took place. Point-to-point calls do not use MMI resources, so these allocations are for conversion calls of multimedia conferences." ::= { g3mmisumEntry 9 } g3mmisumMMIDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an MMI port was needed but could not be allocated because all ports were busy." ::= { g3mmisumEntry 10 } g3mmisumOutofService OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that any MMI ports were out of service during any part of the measured interval." ::= { g3mmisumEntry 11 } g3mmisumPercentAPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all MMI ports are unavailable to carry a new call." ::= { g3mmisumEntry 12 } g3mmisumPercentBlock OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of attempted allocations of MMI ports that are not successful (calculated as percent blockage = (MMI Denials/(Total Alloc + MMI Denials)) * 100)." ::= { g3mmisumEntry 13 } -- the g3pkmmisum group g3pkmmisumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak multimedia interface traffic (MMI) summary data was last extracted from the switch by the Proxy Agent. This object along with the g3pkmmisumTintvl object allows the Network Manager to determine the validity of the peak MMI summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkmmisum 1 } g3pkmmisumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these peak MMI summary objects is received by the agent it uses the g3pkmmisumTage and g3pkmmisumTintvl objects to determine whether it should refresh the cached peak MMI summary data." ::= { g3pkmmisum 2 } g3pkmmisumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkmmisum 3 } g3pkmmisumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3pkmmisum 4 } g3pkmmisumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkmmisum 5 } g3pkmmisumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkmmisumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkmmisum entries." ::= { g3pkmmisum 6 } g3pkmmisumEntry OBJECT-TYPE SYNTAX G3pkmmisumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkmmisum entry containing objects of the g3pkmmisum information sent by the switch." INDEX { g3pkmmisumMeasHour } ::= { g3pkmmisumTable 1 } G3pkmmisumEntry ::= SEQUENCE { g3pkmmisumMeasHour INTEGER, g3pkmmisumYear INTEGER, g3pkmmisumMonth INTEGER, g3pkmmisumDay INTEGER, g3pkmmisumHour INTEGER, g3pkmmisumAvailablePorts INTEGER, g3pkmmisumAvailableUsage DisplayString, g3pkmmisumTotalUsage DisplayString, g3pkmmisumTotalAllocation INTEGER, g3pkmmisumMMIDenials INTEGER, g3pkmmisumOutofService INTEGER, g3pkmmisumPercentAPB DisplayString, g3pkmmisumPercentBlock DisplayString } g3pkmmisumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour for which these measurements apply (based on a 24-hour clock)." ::= { g3pkmmisumEntry 1 } g3pkmmisumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkmmisumEntry 2 } g3pkmmisumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkmmisumEntry 3 } g3pkmmisumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkmmisumEntry 4 } g3pkmmisumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkmmisumEntry 5 } g3pkmmisumAvailablePorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total network MMI ports in the system (does not include any MMIs that are cabled to an ESM)." ::= { g3pkmmisumEntry 6 } g3pkmmisumAvailableUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that is available in the system for network MMI ports (in CCS units)." ::= { g3pkmmisumEntry 7 } g3pkmmisumTotalUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance busy. Usage is measured from the time the port is allocated until it is released." ::= { g3pkmmisumEntry 8 } g3pkmmisumTotalAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times that an MMI port was allocated to a call. Keep in mind that a 2-channel call occupies 2 ports, so this number does not necessarily reflect the number of calls that took place. Point-to-point calls do not use MMI resources, so these allocations are for conversion calls of multimedia conferences." ::= { g3pkmmisumEntry 9 } g3pkmmisumMMIDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an MMI port was needed but could not be allocated because all ports were busy." ::= { g3pkmmisumEntry 10 } g3pkmmisumOutofService OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that any MMI ports were out of service during any part of the measured interval." ::= { g3pkmmisumEntry 11 } g3pkmmisumPercentAPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all MMI ports are unavailable to carry a new call." ::= { g3pkmmisumEntry 12 } g3pkmmisumPercentBlock OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of attempted allocations of MMI ports that are not successful (calculated as percent blockage = (MMI Denials/(Total Alloc + MMI Denials)) * 100)." ::= { g3pkmmisumEntry 13 } -- the g3esmsum group g3esmsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the hourly expansion services module (ESM) summary data was last extracted from the switch by the Proxy Agent.This object along with the g3esmsumTintvl object allows the Network Manager to determine the validity of the hourly ESM summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3esmsum 1 } g3esmsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these hourly ESM summary objects is received by the agent it uses the g3esmsumTage and g3esmsumTintvl objects to determine whether it should refresh the cached hourly ESM summary data." ::= { g3esmsum 2 } g3esmsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3esmsum 3 } g3esmsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3esmsum 4 } g3esmsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3esmsum 5 } g3esmsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3esmsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3esmsum entries." ::= { g3esmsum 6 } g3esmsumEntry OBJECT-TYPE SYNTAX G3esmsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3esmsum entry containing objects of the g3esmsum information sent by the switch." INDEX { g3esmsumMeasHour } ::= { g3esmsumTable 1 } G3esmsumEntry ::= SEQUENCE { g3esmsumMeasHour INTEGER, g3esmsumYear INTEGER, g3esmsumMonth INTEGER, g3esmsumDay INTEGER, g3esmsumHour INTEGER, g3esmsumAvailablePorts INTEGER, g3esmsumAvailableUsage DisplayString, g3esmsumTotalUsage DisplayString, g3esmsumTotalAllocation INTEGER, g3esmsumESMDenials INTEGER, g3esmsumOutofService INTEGER, g3esmsumPercentAPB DisplayString, g3esmsumPercentBlock DisplayString } g3esmsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour for which these measurements apply (based on a 24-hour clock)." ::= { g3esmsumEntry 1 } g3esmsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3esmsumEntry 2 } g3esmsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3esmsumEntry 3 } g3esmsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3esmsumEntry 4 } g3esmsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3esmsumEntry 5 } g3esmsumAvailablePorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total network ESM-MMI ports in the system." ::= { g3esmsumEntry 6 } g3esmsumAvailableUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that is available in the system for network ESM-MMI ports (in CCS units)." ::= { g3esmsumEntry 7 } g3esmsumTotalUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that ESM-MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance busy. Usage is measured from the time the port is allocated until it is released." ::= { g3esmsumEntry 8 } g3esmsumTotalAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times that an ESM-MMI port was allocated to a call." ::= { g3esmsumEntry 9 } g3esmsumESMDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an ESM-MMI port was needed but could not be allocated because all ports were busy." ::= { g3esmsumEntry 10 } g3esmsumOutofService OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that any ESM-MMI ports were out of service during any part of the measured interval." ::= { g3esmsumEntry 11 } g3esmsumPercentAPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all ESM-MMI ports are unavailable to carry a new call." ::= { g3esmsumEntry 12 } g3esmsumPercentBlock OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of attempted allocations of ESM-MMI ports that are not successful (calculated as percent blockage = ((ESM Denials/(Total Alloc + ESM Denials)) * 100))." ::= { g3esmsumEntry 13 } -- the g3pkesmsum group g3pkesmsumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak expansion services module (ESM) summary data was last extracted from the switch by the Proxy Agent.This object along with the g3pkesmsumTintvl object allows the Network Manager to determine the validity of the peak ESM summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkesmsum 1 } g3pkesmsumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these peak ESM summary objects is received by the agent it uses the g3pkesmsumTage and g3pkesmsumTintvl objects to determine whether it should refresh the cached peak ESM summary data." ::= { g3pkesmsum 2 } g3pkesmsumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkesmsum 3 } g3pkesmsumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3pkesmsum 4 } g3pkesmsumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkesmsum 5 } g3pkesmsumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkesmsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkesmsum entries." ::= { g3pkesmsum 6 } g3pkesmsumEntry OBJECT-TYPE SYNTAX G3pkesmsumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkesmsum entry containing objects of the g3pkesmsum information sent by the switch." INDEX { g3pkesmsumMeasHour } ::= { g3pkesmsumTable 1 } G3pkesmsumEntry ::= SEQUENCE { g3pkesmsumMeasHour INTEGER, g3pkesmsumYear INTEGER, g3pkesmsumMonth INTEGER, g3pkesmsumDay INTEGER, g3pkesmsumHour INTEGER, g3pkesmsumAvailablePorts INTEGER, g3pkesmsumAvailableUsage DisplayString, g3pkesmsumTotalUsage DisplayString, g3pkesmsumTotalAllocation INTEGER, g3pkesmsumESMDenials INTEGER, g3pkesmsumOutofService INTEGER, g3pkesmsumPercentAPB DisplayString, g3pkesmsumPercentBlock DisplayString } g3pkesmsumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour for which these measurements apply (based on a 24-hour clock)." ::= { g3pkesmsumEntry 1 } g3pkesmsumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkesmsumEntry 2 } g3pkesmsumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkesmsumEntry 3 } g3pkesmsumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkesmsumEntry 4 } g3pkesmsumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkesmsumEntry 5 } g3pkesmsumAvailablePorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total network ESM-MMI ports in the system." ::= { g3pkesmsumEntry 6 } g3pkesmsumAvailableUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that is available in the system for network ESM-MMI ports (in CCS units)." ::= { g3pkesmsumEntry 7 } g3pkesmsumTotalUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that ESM-MMI ports are in use on a call. It includes the time that the ports are out of service or maintenance busy. Usage is measured from the time the port is allocated until it is released." ::= { g3pkesmsumEntry 8 } g3pkesmsumTotalAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times that an ESM-MMI port was allocated to a call." ::= { g3pkesmsumEntry 9 } g3pkesmsumESMDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times an ESM-MMI port was needed but could not be allocated because all ports were busy." ::= { g3pkesmsumEntry 10 } g3pkesmsumOutofService OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that any ESM-MMI ports were out of service during any part of the measured interval." ::= { g3pkesmsumEntry 11 } g3pkesmsumPercentAPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all ESM-MMI ports are unavailable to carry a new call." ::= { g3pkesmsumEntry 12 } g3pkesmsumPercentBlock OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of attempted allocations of ESM-MMI ports that are not successful (calculated as percent blockage = ((ESM Denials/(Total Alloc + ESM Denials)) * 100))." ::= { g3pkesmsumEntry 13 } -- the g3voicesum group g3voicesumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the hourly voice conditioner (VC) summary data was last extracted from the switch by the Proxy Agent.This object along with the g3voicesumTintvl object allows the Network Manager to determine the validity of the hourly VC summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3voicesum 1 } g3voicesumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these hourly VC summary objects is received by the agent it uses the g3voicesumTage and g3voicesumTintvl objects to determine whether it should refresh the cached hourly VC summary data." ::= { g3voicesum 2 } g3voicesumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3voicesum 3 } g3voicesumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3voicesum 4 } g3voicesumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3voicesum 5 } g3voicesumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3voicesumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3voicesum entries." ::= { g3voicesum 6 } g3voicesumEntry OBJECT-TYPE SYNTAX G3voicesumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3voicesum entry containing objects of the g3voicesum information sent by the switch." INDEX { g3voicesumMeasHour } ::= { g3voicesumTable 1 } G3voicesumEntry ::= SEQUENCE { g3voicesumMeasHour INTEGER, g3voicesumYear INTEGER, g3voicesumMonth INTEGER, g3voicesumDay INTEGER, g3voicesumHour INTEGER, g3voicesumAvailablePorts INTEGER, g3voicesumAvailableUsage DisplayString, g3voicesumH320Usage DisplayString, g3voicesumVoiceUsage DisplayString, g3voicesumTotalUsage DisplayString, g3voicesumH320Allocation INTEGER, g3voicesumVoiceAllocation INTEGER, g3voicesumTotalAllocation INTEGER, g3voicesumH320Denials INTEGER, g3voicesumVoiceDenials INTEGER, g3voicesumTotalDenials INTEGER, g3voicesumOutofService INTEGER, g3voicesumPercentAPB DisplayString, g3voicesumPercentBlock DisplayString } g3voicesumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour for which these measurements apply (based on a 24-hour clock)." ::= { g3voicesumEntry 1 } g3voicesumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3voicesumEntry 2 } g3voicesumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3voicesumEntry 3 } g3voicesumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3voicesumEntry 4 } g3voicesumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3voicesumEntry 5 } g3voicesumAvailablePorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of VC ports in the system." ::= { g3voicesumEntry 6 } g3voicesumAvailableUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that all VC ports are available in the system (calculated as number of MMI ports * 36)." ::= { g3voicesumEntry 7 } g3voicesumH320Usage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that VC ports are allocated to H320 endpoints." ::= { g3voicesumEntry 8 } g3voicesumVoiceUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that VC ports are allocated to voice endpoints." ::= { g3voicesumEntry 9 } g3voicesumTotalUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that VC ports are unavailable to carry a new call. This includes time that the ports are busy on a call, out or service, or maintenance busy. Measured from the time that the port is allocated until it is released." ::= { g3voicesumEntry 10 } g3voicesumH320Allocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was allocated to a H320 call." ::= { g3voicesumEntry 11 } g3voicesumVoiceAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was allocated to a voice call." ::= { g3voicesumEntry 12 } g3voicesumTotalAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was allocated to any call. Each B-channel used on a multimedia call counts as one allocation." ::= { g3voicesumEntry 13 } g3voicesumH320Denials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times a port was needed for an H320 call, but was not available." ::= { g3voicesumEntry 14 } g3voicesumVoiceDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times a port was need for a voice call, but was not available." ::= { g3voicesumEntry 15 } g3voicesumTotalDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was needed for any call, but was not allocated because all VC ports were busy." ::= { g3voicesumEntry 16 } g3voicesumOutofService OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that any VC ports were out of service during any part of the measured interval." ::= { g3voicesumEntry 17 } g3voicesumPercentAPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all VC ports are unavailable to carry a new call." ::= { g3voicesumEntry 18 } g3voicesumPercentBlock OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of attempted allocations of VC ports that are not successful. This value is calculated as percent blockage = ((Total VC Denials / (Total Alloc + Total VC Denials)) * 100)." ::= { g3voicesumEntry 19 } -- the g3pkvoicesum group g3pkvoicesumTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the peak voice conditioner (VC) summary data was last extracted from the switch by the Proxy Agent.This object along with the g3pkvoicesumTintvl object allows the Network Manager to determine the validity of the peak VC summary data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkvoicesum 1 } g3pkvoicesumTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these peak VC summary objects is received by the agent it uses the g3pkvoicesumTage and g3pkvoicesumTintvl objects to determine whether it should refresh the cached peak VC summary data." ::= { g3pkvoicesum 2 } g3pkvoicesumTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkvoicesum 3 } g3pkvoicesumTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3pkvoicesum 4 } g3pkvoicesumTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkvoicesum 5 } g3pkvoicesumTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkvoicesumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkvoicesum entries." ::= { g3pkvoicesum 6 } g3pkvoicesumEntry OBJECT-TYPE SYNTAX G3pkvoicesumEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkvoicesum entry containing objects of the g3pkvoicesum information sent by the switch." INDEX { g3pkvoicesumMeasHour } ::= { g3pkvoicesumTable 1 } G3pkvoicesumEntry ::= SEQUENCE { g3pkvoicesumMeasHour INTEGER, g3pkvoicesumYear INTEGER, g3pkvoicesumMonth INTEGER, g3pkvoicesumDay INTEGER, g3pkvoicesumHour INTEGER, g3pkvoicesumAvailablePorts INTEGER, g3pkvoicesumAvailableUsage DisplayString, g3pkvoicesumH320Usage DisplayString, g3pkvoicesumVoiceUsage DisplayString, g3pkvoicesumTotalUsage DisplayString, g3pkvoicesumH320Allocation INTEGER, g3pkvoicesumVoiceAllocation INTEGER, g3pkvoicesumTotalAllocation INTEGER, g3pkvoicesumH320Denials INTEGER, g3pkvoicesumVoiceDenials INTEGER, g3pkvoicesumTotalDenials INTEGER, g3pkvoicesumOutofService INTEGER, g3pkvoicesumPercentAPB DisplayString, g3pkvoicesumPercentBlock DisplayString } g3pkvoicesumMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour for which these measurements apply (based on a 24-hour clock)." ::= { g3pkvoicesumEntry 1 } g3pkvoicesumYear OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Year the command was executed." ::= { g3pkvoicesumEntry 2 } g3pkvoicesumMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Month the command was executed." ::= { g3pkvoicesumEntry 3 } g3pkvoicesumDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Day the command was executed." ::= { g3pkvoicesumEntry 4 } g3pkvoicesumHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Hour the command was executed." ::= { g3pkvoicesumEntry 5 } g3pkvoicesumAvailablePorts OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of VC ports in the system." ::= { g3pkvoicesumEntry 6 } g3pkvoicesumAvailableUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that all VC ports are available in the system (calculated as number of MMI ports * 36)." ::= { g3pkvoicesumEntry 7 } g3pkvoicesumH320Usage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that VC ports are allocated to H320 endpoints." ::= { g3pkvoicesumEntry 8 } g3pkvoicesumVoiceUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time that VC ports are allocated to voice endpoints." ::= { g3pkvoicesumEntry 9 } g3pkvoicesumTotalUsage OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that VC ports are unavailable to carry a new call. This includes time that the ports are busy on a call, out or service, or maintenance busy. Measured from the time that the port is allocated until it is released." ::= { g3pkvoicesumEntry 10 } g3pkvoicesumH320Allocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was allocated to a H320 call." ::= { g3pkvoicesumEntry 11 } g3pkvoicesumVoiceAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was allocated to a voice call." ::= { g3pkvoicesumEntry 12 } g3pkvoicesumTotalAllocation OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was allocated to any call. Each B-channel used on a multimedia call counts as one allocation." ::= { g3pkvoicesumEntry 13 } g3pkvoicesumH320Denials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times a port was needed for an H320 call, but was not available." ::= { g3pkvoicesumEntry 14 } g3pkvoicesumVoiceDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of times a port was need for a voice call, but was not available." ::= { g3pkvoicesumEntry 15 } g3pkvoicesumTotalDenials OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of times a VC port was needed for any call, but was not allocated because all VC ports were busy." ::= { g3pkvoicesumEntry 16 } g3pkvoicesumOutofService OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total time, in CCS units, that any VC ports were out of service during any part of the measured interval." ::= { g3pkvoicesumEntry 17 } g3pkvoicesumPercentAPB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of time during the measured interval that all VC ports are unavailable to carry a new call." ::= { g3pkvoicesumEntry 18 } g3pkvoicesumPercentBlock OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the percentage of attempted allocations of VC ports that are not successful. This value is calculated as percent blockage = ((Total VC Denials / (Total Alloc + Total VC Denials)) * 100)." ::= { g3pkvoicesumEntry 19 } -- the g3ipintlist group g3ipintlistTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the ip interface data was last extracted from the switch by the Proxy Agent.This object along with the g3ipintlistTintvl object allows the Network Manager to determine the validity of the ip interface data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3ipintlist 1 } g3ipintlistTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these ip interface objects is received by the agent it uses the g3ipintlistTage and g3ipintlistTintvl objects to determine whether it should refresh the cached ip interface data." ::= { g3ipintlist 2 } g3ipintlistTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3ipintlist 3 } g3ipintlistTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipintlist 4 } g3ipintlistTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipintlist 5 } g3ipintlistTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipintlistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipintlist entries." ::= { g3ipintlist 6 } g3ipintlistEntry OBJECT-TYPE SYNTAX G3ipintlistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipintlist entry containing objects of the g3ipintlist information sent by the switch." INDEX { g3ipintlistNodeName } ::= { g3ipintlistTable 1 } G3ipintlistEntry ::= SEQUENCE { g3ipintlistNodeName DisplayString, g3ipintlistSlot DisplayString } g3ipintlistNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the the node-name for the ip interface" ::= { g3ipintlistEntry 1 } g3ipintlistSlot OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the the VAL, CLAN or MEDPRO board slot number " ::= { g3ipintlistEntry 2 } -- the g3stamedlist group g3stamedlistTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the media gateway status data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3stamedlistTintvl object allows the Network Manager to determine the validity of the media gateway status data in the cache and to control when the proxy agent extracts the status media gateway data from the switch." ::= { g3stamedlist 1 } g3stamedlistTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these media gateway status objects is received by the agent it uses the g3stamedlistTage and g3stamedlistTintvl objects to determine whether it should refresh the cached media gateway status data." ::= { g3stamedlist 2 } g3stamedlistTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3stamedlist 3 } g3stamedlistTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3stamedlist 4 } g3stamedlistTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3stamedlist 5 } g3stamedlistTable OBJECT-TYPE SYNTAX SEQUENCE OF G3stamedlistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3stamedlist entries." ::= { g3stamedlist 6 } g3stamedlistEntry OBJECT-TYPE SYNTAX G3stamedlistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3stamedlist entry containing objects of the g3stamedlist information sent by the switch." INDEX { g3stamedlistGatewayStatus } ::= { g3stamedlistTable 1 } G3stamedlistEntry ::= SEQUENCE { g3stamedlistGatewayStatus DisplayString } g3stamedlistGatewayStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the status of the first set of eight media gateways, including the number of major alarms, minor alarms, warnings, and the H.248 link status for each specific media gateway number." ::= { g3stamedlistEntry 1 } -- the g3lsplist group g3lsplistTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the survivable processor data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3lsplistTintvl object allows the Network Manager to determine the validity of the survivable processor data in the cache and to control when the proxy agent extracts the survivable processor data from the switch." ::= { g3lsplist 1 } g3lsplistTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these survivable processor objects is received by the agent it uses the g3lsplistTage and g3lsplistTintvl objects to determine whether it should refresh the cached surivable processor data." ::= { g3lsplist 2 } g3lsplistTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3lsplist 3 } g3lsplistTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3lsplist 4 } g3lsplistTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3lsplist 5 } g3lsplistTable OBJECT-TYPE SYNTAX SEQUENCE OF G3lsplistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3lsplist entries." ::= { g3lsplist 6 } g3lsplistEntry OBJECT-TYPE SYNTAX G3lsplistEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3lsplist entry containing objects of the g3lsplist information sent by the switch." INDEX { g3lsplistNodeName } ::= { g3lsplistTable 1 } G3lsplistEntry ::= SEQUENCE { g3lsplistNodeName DisplayString, g3lsplistIPAddr1 DisplayString, g3lsplistIPAddr2 DisplayString, g3lsplistIPAddr3 DisplayString, g3lsplistIPAddr4 DisplayString, g3lsplistAvailable DisplayString, g3lsplistXlnUpdated DisplayString, g3lsplistServiceState DisplayString, g3lsplistNetworkRegion DisplayString, g3lsplistType DisplayString, g3lsplistID DisplayString, g3lsplistRegistered DisplayString, g3lsplistActive DisplayString } g3lsplistNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the survivable processor node name." ::= { g3lsplistEntry 1 } g3lsplistIPAddr1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first part of the survivable processor IP address on pre-3.1 CM releases. On CM 3.1 and greater, the complete IP address is populated in this field." ::= { g3lsplistEntry 2 } g3lsplistIPAddr2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second part of the survivable processor IP address. This field is only populated on pre-3.1 CM releases." ::= { g3lsplistEntry 3 } g3lsplistIPAddr3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third part of the survivable processor IP address. This field is only populated on pre-3.1 CM releases." ::= { g3lsplistEntry 4 } g3lsplistIPAddr4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the fourth part of the surivivable processor IP address. This field is only populated on pre-3.1 CM releases." ::= { g3lsplistEntry 5 } g3lsplistAvailable OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object indicating the availability of the survivable processor (y(es) or n(o)). This field is only populated on older CM releases. This field has become obsolete." ::= { g3lsplistEntry 6 } g3lsplistXlnUpdated OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the date and time of the last translation update in the format mm/dd/hh:mm." ::= { g3lsplistEntry 7 } g3lsplistServiceState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the service state of the survivable processor. This field has become obsolete." ::= { g3lsplistEntry 8 } g3lsplistNetworkRegion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the network region of the survivable processor." ::= { g3lsplistEntry 9 } g3lsplistType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the type of the survivable processor (LSP or ESS)." ::= { g3lsplistEntry 10 } g3lsplistID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of the survivable processor." ::= { g3lsplistEntry 11 } g3lsplistRegistered OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object indicating whether the survivable processor is registered (y(es) or n(o))." ::= { g3lsplistEntry 12 } g3lsplistActive OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object indicating the active state of survivable processor (y(es)or n(o))." ::= { g3lsplistEntry 13 } -- the g3eventhour group g3eventhourTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the last hour denial event data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3eventhourTintvl object allows the Network Manager to determine the validity of the event data in the cache and to control when the proxy agent extracts the event data from the switch." ::= { g3eventhour 1 } g3eventhourTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these event objects is received by the agent it uses the g3eventhourTage and g3eventhourTintvl objects to determine whether it should refresh the cached event data." ::= { g3eventhour 2 } g3eventhourTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3eventhour 3 } g3eventhourTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3eventhour 4 } g3eventhourTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3eventhour 5 } g3eventhourTable OBJECT-TYPE SYNTAX SEQUENCE OF G3eventhourEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3eventhour entries." ::= { g3eventhour 6 } g3eventhourEntry OBJECT-TYPE SYNTAX G3eventhourEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3eventhour entry containing objects of the g3eventhour information sent by the switch." INDEX { g3eventhourEventType, g3eventhourIndex } ::= { g3eventhourTable 1 } G3eventhourEntry ::= SEQUENCE { g3eventhourEventType DisplayString, g3eventhourIndex INTEGER, g3eventhourEventDesc DisplayString, g3eventhourEventData1 DisplayString, g3eventhourEventData2 DisplayString, g3eventhourFirstMonth DisplayString, g3eventhourFirstDay DisplayString, g3eventhourFirstHour DisplayString, g3eventhourFirstMinute DisplayString, g3eventhourLastMonth DisplayString, g3eventhourLastDay DisplayString, g3eventhourLastHour DisplayString, g3eventhourLastMinute DisplayString, g3eventhourEventCount DisplayString } g3eventhourEventType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the event code number for a given denial event." ::= { g3eventhourEntry 1 } g3eventhourIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the event entry for the type specified in EventType. This object along with EventType will serve as the instance identifier for the record entry." ::= { g3eventhourEntry 2 } g3eventhourEventDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the denial event description." ::= { g3eventhourEntry 3 } g3eventhourEventData1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the first half of the event data." ::= { g3eventhourEntry 4 } g3eventhourEventData2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the last half of the event data." ::= { g3eventhourEntry 5 } g3eventhourFirstMonth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Month of the first occurrence." ::= { g3eventhourEntry 6 } g3eventhourFirstDay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Day of the first occurrence." ::= { g3eventhourEntry 7 } g3eventhourFirstHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Hour of the first occurrence." ::= { g3eventhourEntry 8 } g3eventhourFirstMinute OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Minute of the first occurrence." ::= { g3eventhourEntry 9 } g3eventhourLastMonth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Month of the last occurrence." ::= { g3eventhourEntry 10 } g3eventhourLastDay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Day of the last occurrence." ::= { g3eventhourEntry 11 } g3eventhourLastHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Hour of the last occurrence." ::= { g3eventhourEntry 12 } g3eventhourLastMinute OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Minute of the last occurrence." ::= { g3eventhourEntry 13 } g3eventhourEventCount OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the number of occurrences of the denial event." ::= { g3eventhourEntry 14 } -- the g3eventday group g3eventdayTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the last day denial event data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3eventdayTintvl object allows the Network Manager to determine the validity of the event data in the cache and to control when the proxy agent extracts the event data from the switch." ::= { g3eventday 1 } g3eventdayTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these event objects is received by the agent it uses the g3eventdayTage and g3eventdayTintvl objects to determine whether it should refresh the cached event data." ::= { g3eventday 2 } g3eventdayTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3eventday 3 } g3eventdayTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3eventday 4 } g3eventdayTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3eventday 5 } g3eventdayTable OBJECT-TYPE SYNTAX SEQUENCE OF G3eventdayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3eventday entries." ::= { g3eventday 6 } g3eventdayEntry OBJECT-TYPE SYNTAX G3eventdayEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3eventday entry containing objects of the g3eventday information sent by the switch." INDEX { g3eventdayEventType, g3eventdayIndex } ::= { g3eventdayTable 1 } G3eventdayEntry ::= SEQUENCE { g3eventdayEventType DisplayString, g3eventdayIndex INTEGER, g3eventdayEventDesc DisplayString, g3eventdayEventData1 DisplayString, g3eventdayEventData2 DisplayString, g3eventdayFirstMonth DisplayString, g3eventdayFirstDay DisplayString, g3eventdayFirstHour DisplayString, g3eventdayFirstMinute DisplayString, g3eventdayLastMonth DisplayString, g3eventdayLastDay DisplayString, g3eventdayLastHour DisplayString, g3eventdayLastMinute DisplayString, g3eventdayEventCount DisplayString } g3eventdayEventType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the event code number for a given denial event." ::= { g3eventdayEntry 1 } g3eventdayIndex OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the event entry for the type specified in EventType. This object along with EventType will serve as the instance identifier for the record entry." ::= { g3eventdayEntry 2 } g3eventdayEventDesc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the denial event description." ::= { g3eventdayEntry 3 } g3eventdayEventData1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..9)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the first half of the event data." ::= { g3eventdayEntry 4 } g3eventdayEventData2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the last half of the event data." ::= { g3eventdayEntry 5 } g3eventdayFirstMonth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Month of the first occurrence." ::= { g3eventdayEntry 6 } g3eventdayFirstDay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Day of the first occurrence." ::= { g3eventdayEntry 7 } g3eventdayFirstHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Hour of the first occurrence." ::= { g3eventdayEntry 8 } g3eventdayFirstMinute OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Minute of the first occurrence." ::= { g3eventdayEntry 9 } g3eventdayLastMonth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Month of the last occurrence." ::= { g3eventdayEntry 10 } g3eventdayLastDay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Day of the last occurrence." ::= { g3eventdayEntry 11 } g3eventdayLastHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Hour of the last occurrence." ::= { g3eventdayEntry 12 } g3eventdayLastMinute OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Minute of the last occurrence." ::= { g3eventdayEntry 13 } g3eventdayEventCount OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the number of occurrences of the denial event." ::= { g3eventdayEntry 14 } -- the g3statregion group g3statregionTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the network region status data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3statregionTintvl object allows the Network Manager to determine the validity of the network region status data in the cache and to control when the proxy agent extracts the network region data from the switch." ::= { g3statregion 1 } g3statregionTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these network region status objects is received by the agent it uses the g3statregionTage and g3statregionTintvl objects to determine whether it should refresh the cached network region status data." ::= { g3statregion 2 } g3statregionTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3statregion 3 } g3statregionTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3statregion 4 } g3statregionTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3statregion 5 } g3statregionTable OBJECT-TYPE SYNTAX SEQUENCE OF G3statregionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3statregion entries." ::= { g3statregion 6 } g3statregionEntry OBJECT-TYPE SYNTAX G3statregionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3statregion entry containing objects of the g3statregion information sent by the switch." INDEX { g3statregionSourceRegion, g3statregionDestRegion } ::= { g3statregionTable 1 } G3statregionEntry ::= SEQUENCE { g3statregionSourceRegion INTEGER, g3statregionDestRegion INTEGER, g3statregionConnType DisplayString, g3statregionConnStatus DisplayString, g3statregionBWLimitValue DisplayString, g3statregionBWLimitUnits DisplayString, g3statregionBWUsedTx DisplayString, g3statregionBWUsedRx DisplayString, g3statregionNbrConnTx DisplayString, g3statregionNbrConnRx DisplayString, g3statregionDenialCount DisplayString } g3statregionSourceRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the IP network region that is the source of the VoIP traffic." ::= { g3statregionEntry 1 } g3statregionDestRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the IP network region that is the destination of the VoIP traffic." ::= { g3statregionEntry 2 } g3statregionConnType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the type of connection (either direct or indirect)." ::= { g3statregionEntry 3 } g3statregionConnStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the status of connection (either pass or fail)." ::= { g3statregionEntry 4 } g3statregionBWLimitValue OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the administered bandwidth value." ::= { g3statregionEntry 5 } g3statregionBWLimitUnits OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the administered bandwidth units (Calls, Kbits, Mbits, or NoLimit)." ::= { g3statregionEntry 6 } g3statregionBWUsedTx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the transmit bandwidth used for direct connections only." ::= { g3statregionEntry 7 } g3statregionBWUsedRx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..6)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the receive bandwidth used for direct connections only." ::= { g3statregionEntry 8 } g3statregionNbrConnTx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the transmit connection count for direct connections only." ::= { g3statregionEntry 9 } g3statregionNbrConnRx OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the receive connection count for direct connections only." ::= { g3statregionEntry 10 } g3statregionDenialCount OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the denial count." ::= { g3statregionEntry 11 } -- the g3ipnetregion group g3ipnetregionTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the network region data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3ipnetregionTintvl object allows the Network Manager to determine the validity of the network region data in the cache and to control when the proxy agent extracts the network region data from the switch." ::= { g3ipnetregion 1 } g3ipnetregionTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these network region objects is received by the agent it uses the g3ipnetregionTage and g3ipnetregionTintvl objects to determine whether it should refresh the cached network region data." ::= { g3ipnetregion 2 } g3ipnetregionTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3ipnetregion 3 } g3ipnetregionTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3ipnetregion 4 } g3ipnetregionTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipnetregion 5 } g3ipnetregionTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipnetregionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipnetregion entries." ::= { g3ipnetregion 6 } g3ipnetregionEntry OBJECT-TYPE SYNTAX G3ipnetregionEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipnetregion entry containing objects of the g3ipnetregion information sent by the switch." INDEX { g3ipnetregionRegion } ::= { g3ipnetregionTable 1 } G3ipnetregionEntry ::= SEQUENCE { g3ipnetregionRegion INTEGER, g3ipnetregionCCPHB INTEGER, g3ipnetregionAudioPHB INTEGER, g3ipnetregionCC8021Pri INTEGER, g3ipnetregionAudio8021Pri INTEGER, g3ipnetregionRSVPEnabled DisplayString, g3ipnetregionRSVPRefresh INTEGER, g3ipnetregionRSVPFailure DisplayString, g3ipnetregionRSVPProfile DisplayString, g3ipnetregionRSVPBBE INTEGER, g3ipnetregionLastError DisplayString } g3ipnetregionRegion OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing the IP network region number (value 1-250)." ::= { g3ipnetregionEntry 1 } g3ipnetregionCCPHB OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing the DiffServ/TOS Call Control PHB (value 0-63)." ::= { g3ipnetregionEntry 2 } g3ipnetregionAudioPHB OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing the DiffServ/TOS Audio PHB (value 0-63)." ::= { g3ipnetregionEntry 3 } g3ipnetregionCC8021Pri OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing the Call Control 802.1p Priority (values 0-7)." ::= { g3ipnetregionEntry 4 } g3ipnetregionAudio8021Pri OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing the Audio 802.1p Priority (values 0-7)." ::= { g3ipnetregionEntry 5 } g3ipnetregionRSVPEnabled OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing a flag indicating whether RSVP is enabled (y or n)." ::= { g3ipnetregionEntry 6 } g3ipnetregionRSVPRefresh OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing the RSVP Refresh Rate (values 1-99)." ::= { g3ipnetregionEntry 7 } g3ipnetregionRSVPFailure OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing a flag indicating whether retry on RSVP failure is enabled (y or n)." ::= { g3ipnetregionEntry 8 } g3ipnetregionRSVPProfile OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing the RSVP profile (controlled-load or guaranteed-service)." ::= { g3ipnetregionEntry 9 } g3ipnetregionRSVPBBE OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString object containing the RSVP unreserved BBE PHB (values 0-63)." ::= { g3ipnetregionEntry 10 } g3ipnetregionLastError OBJECT-TYPE SYNTAX DisplayString (SIZE (0..100)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the last error message encountered when attempting to change ip-network-region parameters." ::= { g3ipnetregionEntry 11 } -- the g3statmedpro group g3statmedproTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the media processor status data was extracted from the switch by the G3 Proxy Agent. This object along with the g3statmedproTintvl object allows the Network Manager to determine the validity of the media processor status data in the cache and to control when the proxy agent extracts the media processor status data from the switch." ::= { g3statmedpro 1 } g3statmedproTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these media processor status objects is received by the agent it uses the g3statmedproTage and g3statmedproTintvl objects to determine whether it should refresh the cached media processor status data." ::= { g3statmedpro 2 } g3statmedproTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3statmedpro 3 } g3statmedproTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3statmedpro 4 } g3statmedproTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3statmedpro 5 } g3statmedproTable OBJECT-TYPE SYNTAX SEQUENCE OF G3statmedproEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3statmedpro entries." ::= { g3statmedpro 6 } g3statmedproEntry OBJECT-TYPE SYNTAX G3statmedproEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3statmedpro entry containing objects of the g3statmedpro information sent by the switch." INDEX { g3statmedproBoardLoc } ::= { g3statmedproTable 1 } G3statmedproEntry ::= SEQUENCE { g3statmedproBoardLoc DisplayString, g3statmedproState DisplayString, g3statmedproNodeName DisplayString, g3statmedproSourceIP DisplayString, g3statmedproSubnetMask DisplayString, g3statmedproBroadCastAddr DisplayString, g3statmedproMACAddress DisplayString, g3statmedproEtherEnabled DisplayString, g3statmedproDSPChanStatus1 DisplayString, g3statmedproDSPChanStatus2 DisplayString, g3statmedproDSPChanStatus3 DisplayString, g3statmedproDSPChanStatus4 DisplayString, g3statmedproDupDSPChanStatus5 DisplayString, g3statmedproDupDSPChanStatus6 DisplayString, g3statmedproDupDSPChanStatus7 DisplayString, g3statmedproDupDSPChanStatus8 DisplayString, g3statmedproNetworkRegion DisplayString, g3statmedproAltNetworkRegion DisplayString, g3statmedproStandbyRefreshed DisplayString, g3statmedproSharedIP DisplayString, g3statmedproSharedVirtMAC DisplayString, g3statmedproDupBoardLoc DisplayString, g3statmedproDupState DisplayString, g3statmedproDupNodeName DisplayString, g3statmedproDupSourceIP DisplayString, g3statmedproDupSubnetMask DisplayString, g3statmedproDupBroadCastAddr DisplayString, g3statmedproDupMACAddress DisplayString, g3statmedproDupEtherEnabled DisplayString, g3statmedproLinkMPCL DisplayString, g3statmedproLinkEth DisplayString, g3statmedproLinkPeer DisplayString, g3statmedproAlarmMaj DisplayString, g3statmedproAlarmMin DisplayString, g3statmedproAlarmWrn DisplayString, g3statmedproDupLinkMPCL DisplayString, g3statmedproDupLinkEth DisplayString, g3statmedproDupLinkPeer DisplayString, g3statmedproDupAlarmMaj DisplayString, g3statmedproDupAlarmMin DisplayString, g3statmedproDupAlarmWrn DisplayString, g3statmedproLocked DisplayString } g3statmedproBoardLoc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object contains the media processor board location." ::= { g3statmedproEntry 1 } g3statmedproState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains state of the media processor board (values can be 'active', 'standby' or 'init')." ::= { g3statmedproEntry 2 } g3statmedproNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the node name for the media processor board." ::= { g3statmedproEntry 3 } g3statmedproSourceIP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the source IP address for the media processor board." ::= { g3statmedproEntry 4 } g3statmedproSubnetMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the subnet mask for the media processor board." ::= { g3statmedproEntry 5 } g3statmedproBroadCastAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the broadcast IP address for the media processor board." ::= { g3statmedproEntry 6 } g3statmedproMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the MAC address of the media processor board." ::= { g3statmedproEntry 7 } g3statmedproEtherEnabled OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that designates whether or not the IP interface is enabled (yes or no) for the media processor board." ::= { g3statmedproEntry 8 } g3statmedproDSPChanStatus1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the service state of the respective DSP resource (for the media processor board)." ::= { g3statmedproEntry 9 } g3statmedproDSPChanStatus2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3statmedproDSPChanStatus1." ::= { g3statmedproEntry 10 } g3statmedproDSPChanStatus3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3statmedproDSPChanStatus1." ::= { g3statmedproEntry 11 } g3statmedproDSPChanStatus4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3statmedproDSPChanStatus1." ::= { g3statmedproEntry 12 } g3statmedproDupDSPChanStatus5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the service state of the respective DSP resource (for the duplicate media processor board)." ::= { g3statmedproEntry 13 } g3statmedproDupDSPChanStatus6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3statmedproDupDSPChanStatus5." ::= { g3statmedproEntry 14 } g3statmedproDupDSPChanStatus7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3statmedproDupDSPChanStatus5." ::= { g3statmedproEntry 15 } g3statmedproDupDSPChanStatus8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..35)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3statmedproDupDSPChanStatus5." ::= { g3statmedproEntry 16 } g3statmedproNetworkRegion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the network region number for the media processor board." ::= { g3statmedproEntry 17 } g3statmedproAltNetworkRegion OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the alternate network region number for the media processor board." ::= { g3statmedproEntry 18 } g3statmedproStandbyRefreshed OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether the standby board in a duplicated pair of media processor boards is in sync with the active board (yes or no)." ::= { g3statmedproEntry 19 } g3statmedproSharedIP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the shared virtual IP address between two duplicated media processor boards." ::= { g3statmedproEntry 20 } g3statmedproSharedVirtMAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..18)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the shared virtual MAC address between two duplicated media processor boards." ::= { g3statmedproEntry 21 } g3statmedproDupBoardLoc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object contains the duplicate media processor board location." ::= { g3statmedproEntry 22 } g3statmedproDupState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains state of the duplicate media processor board (values can be 'active', 'standby' or 'init')." ::= { g3statmedproEntry 23 } g3statmedproDupNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the node name for the duplicate media processor board." ::= { g3statmedproEntry 24 } g3statmedproDupSourceIP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the source IP address for the duplicate media processor board." ::= { g3statmedproEntry 25 } g3statmedproDupSubnetMask OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the subnet mask for the duplicate media processor board." ::= { g3statmedproEntry 26 } g3statmedproDupBroadCastAddr OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the broadcast IP address for the duplicate media processor board." ::= { g3statmedproEntry 27 } g3statmedproDupMACAddress OBJECT-TYPE SYNTAX DisplayString (SIZE (0..17)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the MAC address of the media processor board." ::= { g3statmedproEntry 28 } g3statmedproDupEtherEnabled OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that designates whether or not the IP interface is enabled (yes or no) for the duplicate media processor board." ::= { g3statmedproEntry 29 } g3statmedproLinkMPCL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the status of the Media Processor Control Link ('up' or 'dn') for the media processor board." ::= { g3statmedproEntry 30 } g3statmedproLinkEth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the status of the Ethernet Link ('up' or 'dn') for the media processor board." ::= { g3statmedproEntry 31 } g3statmedproLinkPeer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the status of the Peer Link ('up' or 'dn') for the media processor board." ::= { g3statmedproEntry 32 } g3statmedproAlarmMaj OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the number of major alarms active on the media processor board. " ::= { g3statmedproEntry 33 } g3statmedproAlarmMin OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the number of minor alarms active on the media processor board. " ::= { g3statmedproEntry 34 } g3statmedproAlarmWrn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the number of warning alarms active on the media processor board. " ::= { g3statmedproEntry 35 } g3statmedproDupLinkMPCL OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the status of the Media Processor Control Link ('up' or 'dn') for the duplicate media processor board." ::= { g3statmedproEntry 36 } g3statmedproDupLinkEth OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the status of the Ethernet Link ('up' or 'dn') for the duplicate media processor board." ::= { g3statmedproEntry 37 } g3statmedproDupLinkPeer OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the status of the Peer Link ('up' or 'dn') for the duplicate media processor board." ::= { g3statmedproEntry 38 } g3statmedproDupAlarmMaj OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the number of major alarms active on the duplicate media processor board. " ::= { g3statmedproEntry 39 } g3statmedproDupAlarmMin OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the number of minor alarms active on the duplicate media processor board. " ::= { g3statmedproEntry 40 } g3statmedproDupAlarmWrn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates the number of warning alarms active on the duplicate media processor board. " ::= { g3statmedproEntry 41 } g3statmedproLocked OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that indicates whether the set medpro override and lock command argument is in use (yes or no)." ::= { g3statmedproEntry 42 } -- the g3ipunreg group g3ipunregTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the list of unregistered IP phones was last extracted from the switch by the Proxy Agent. This object along with the g3ipunregTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3ipunreg 1 } g3ipunregTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3ipunregTage and g3ipunregTintvl objects to determine whether it should refresh the data." ::= { g3ipunreg 2 } g3ipunregTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3ipunreg 3 } g3ipunregTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3ipunreg 4 } g3ipunregTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3ipunreg 5 } g3ipunregTable OBJECT-TYPE SYNTAX SEQUENCE OF G3ipunregEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3ipunreg entries." ::= { g3ipunreg 6 } g3ipunregEntry OBJECT-TYPE SYNTAX G3ipunregEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3ipunreg entry containing objects of the g3ipunreg information sent by the switch." INDEX { g3ipunregStatExtn } ::= { g3ipunregTable 1 } G3ipunregEntry ::= SEQUENCE { g3ipunregStatExtn DisplayString, g3ipunregStatPort DisplayString, g3ipunregStatReg DisplayString } g3ipunregStatExtn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension of the unregistered IP telephone." ::= { g3ipunregEntry 1 } g3ipunregStatPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the port location of the unregistered IP telephone." ::= { g3ipunregEntry 2 } g3ipunregStatReg OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the registration status of the IP telephone (y or n)." ::= { g3ipunregEntry 3 } -- the g3commlink group g3commlinkTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the communication interface link data was last extracted from the switch by the G3 Proxy Agent. This object along with the g3commlinkTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the proxy agent extracts the data from the switch." ::= { g3commlink 1 } g3commlinkTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for these objects is received by the agent it uses the g3commlinkTage and g3commlinkTintvl objects to determine whether it should refresh the cached data." ::= { g3commlink 2 } g3commlinkTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data" ::= { g3commlink 3 } g3commlinkTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'. This object may be set to 'update' to force a refresh of the cache." ::= { g3commlink 4 } g3commlinkTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3commlink 5 } g3commlinkTable OBJECT-TYPE SYNTAX SEQUENCE OF G3commlinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3commlink entries." ::= { g3commlink 6 } g3commlinkEntry OBJECT-TYPE SYNTAX G3commlinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3commlink entry containing objects of the g3commlink information sent by the switch." INDEX { g3commlinkLinkNumber } ::= { g3commlinkTable 1 } G3commlinkEntry ::= SEQUENCE { g3commlinkLinkNumber INTEGER, g3commlinkLinkType DisplayString, g3commlinkEnableLink DisplayString, g3commlinkEstablishConn DisplayString, g3commlinkExtension DisplayString, g3commlinkDestNumber DisplayString, g3commlinkConnModule DisplayString, g3commlinkName DisplayString } g3commlinkLinkNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system link number (1-99)." ::= { g3commlinkEntry 1 } g3commlinkLinkType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system link type." ::= { g3commlinkEntry 2 } g3commlinkEnableLink OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag indicating whether the link is enabled (y/n)." ::= { g3commlinkEntry 3 } g3commlinkEstablishConn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag indicating whether a connection has been established (y/n)." ::= { g3commlinkEntry 4 } g3commlinkExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension number of the link." ::= { g3commlinkEntry 5 } g3commlinkDestNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the destination extension number." ::= { g3commlinkEntry 6 } g3commlinkConnModule OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the extension number of the connected data module." ::= { g3commlinkEntry 7 } g3commlinkName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..27)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a description of the link." ::= { g3commlinkEntry 8 } -- the g3statlink group g3statlinkTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the link status was last extracted from the switch by the Proxy Agent. This object along with the g3statlinkTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3statlink 1 } g3statlinkTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3statlinkTage and g3statlinkTintvl objects to determine whether it should refresh the data." ::= { g3statlink 2 } g3statlinkTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3statlink 3 } g3statlinkTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3statlink 4 } g3statlinkTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3statlink 5 } g3statlinkTable OBJECT-TYPE SYNTAX SEQUENCE OF G3statlinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3statlink entries." ::= { g3statlink 6 } g3statlinkEntry OBJECT-TYPE SYNTAX G3statlinkEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3statlink entry containing objects of the g3statlink information sent by the switch." INDEX { g3statlinkSysLinkNumber } ::= { g3statlinkTable 1 } G3statlinkEntry ::= SEQUENCE { g3statlinkSysLinkNumber INTEGER, g3statlinkCLANBoardLoc DisplayString, g3statlinkDOLANSessions INTEGER, g3statlinkIncRcvdUniPkt INTEGER, g3statlinkIncRcvdMulPkt INTEGER, g3statlinkIncRcvdOctet INTEGER, g3statlinkIncDrpErrPkt INTEGER, g3statlinkIncDrpDisPkt INTEGER, g3statlinkOtgTransUniPkt INTEGER, g3statlinkOtgTransMulPkt INTEGER, g3statlinkOutTransOctet INTEGER, g3statlinkOtgDrpErrPkt INTEGER, g3statlinkOtgDrpDisPkt INTEGER } g3statlinkSysLinkNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the system link number for the CLAN board." ::= { g3statlinkEntry 1 } g3statlinkCLANBoardLoc OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the location of the CLAN board." ::= { g3statlinkEntry 2 } g3statlinkDOLANSessions OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of current IP registrations through the CLAN board." ::= { g3statlinkEntry 3 } g3statlinkIncRcvdUniPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of unicast packets received" ::= { g3statlinkEntry 4 } g3statlinkIncRcvdMulPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of multicast packets received" ::= { g3statlinkEntry 5 } g3statlinkIncRcvdOctet OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of octects received" ::= { g3statlinkEntry 6 } g3statlinkIncDrpErrPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of incomming error packets " ::= { g3statlinkEntry 7 } g3statlinkIncDrpDisPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of incomming discard packets " ::= { g3statlinkEntry 8 } g3statlinkOtgTransUniPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of unicast packets transmitted" ::= { g3statlinkEntry 9 } g3statlinkOtgTransMulPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of multicast packets transmitted" ::= { g3statlinkEntry 10 } g3statlinkOutTransOctet OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of octects received" ::= { g3statlinkEntry 11 } g3statlinkOtgDrpErrPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of outgoing error packets " ::= { g3statlinkEntry 12 } g3statlinkOtgDrpDisPkt OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of outgoing discard packets " ::= { g3statlinkEntry 13 } -- the g3covpath group g3covpathTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3covpathTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3covpath 1 } g3covpathTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3covpathTage and g3covpathTintvl objects to determine whether it should refresh the data." ::= { g3covpath 2 } g3covpathTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3covpath 3 } g3covpathTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3covpath 4 } g3covpathTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3covpath 5 } g3covpathTable OBJECT-TYPE SYNTAX SEQUENCE OF G3covpathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3covpath entries." ::= { g3covpath 6 } g3covpathEntry OBJECT-TYPE SYNTAX G3covpathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3covpath entry containing objects of the g3covpath information sent by the switch." INDEX { g3covpathCoveragePath } ::= { g3covpathTable 1 } G3covpathEntry ::= SEQUENCE { g3covpathCoveragePath INTEGER, g3covpathMeasHour INTEGER, g3covpathCallsOffTotal INTEGER, g3covpathCallsOffAct INTEGER, g3covpathCallsOffBusy INTEGER, g3covpathCallsOffDA INTEGER, g3covpathCallsOffCA INTEGER, g3covpathCallsOffSAC INTEGER, g3covpathCallsOffCB INTEGER, g3covpathPoint1Ans DisplayString, g3covpathPoint2Ans DisplayString, g3covpathPoint3Ans DisplayString, g3covpathPoint4Ans DisplayString, g3covpathPoint5Ans DisplayString, g3covpathPoint6Ans DisplayString, g3covpathPoint1Aband DisplayString, g3covpathPoint2Aband DisplayString, g3covpathPoint3Aband DisplayString, g3covpathPoint4Aband DisplayString, g3covpathPoint5Aband DisplayString, g3covpathPoint6Aband DisplayString } g3covpathCoveragePath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measured coverage path." ::= { g3covpathEntry 1 } g3covpathMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time of the hour during which the greatest number of calls are offered to the coverage path." ::= { g3covpathEntry 2 } g3covpathCallsOffTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path." ::= { g3covpathEntry 3 } g3covpathCallsOffAct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal being active." ::= { g3covpathEntry 4 } g3covpathCallsOffBusy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal being busy." ::= { g3covpathEntry 5 } g3covpathCallsOffDA OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path because the principal did not answer the call after the administered number of rings." ::= { g3covpathEntry 6 } g3covpathCallsOffCA OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal's use of Cover All." ::= { g3covpathEntry 7 } g3covpathCallsOffSAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal's use of Send All Calls or the calling party using Go To Coverage." ::= { g3covpathEntry 8 } g3covpathCallsOffCB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path where the calling party used LWC or ACB before a coverage point answered the call." ::= { g3covpathEntry 9 } g3covpathPoint1Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3covpathEntry 10 } g3covpathPoint2Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3covpathEntry 11 } g3covpathPoint3Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3covpathEntry 12 } g3covpathPoint4Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3covpathEntry 13 } g3covpathPoint5Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3covpathEntry 14 } g3covpathPoint6Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3covpathEntry 15 } g3covpathPoint1Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3covpathEntry 16 } g3covpathPoint2Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3covpathEntry 17 } g3covpathPoint3Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3covpathEntry 18 } g3covpathPoint4Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3covpathEntry 19 } g3covpathPoint5Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3covpathEntry 20 } g3covpathPoint6Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3covpathEntry 21 } -- the g3pkcovpath group g3pkcovpathTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3pkcovpathTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkcovpath 1 } g3pkcovpathTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3pkcovpathTage and g3pkcovpathTintvl objects to determine whether it should refresh the data." ::= { g3pkcovpath 2 } g3pkcovpathTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkcovpath 3 } g3pkcovpathTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3pkcovpath 4 } g3pkcovpathTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkcovpath 5 } g3pkcovpathTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkcovpathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkcovpath entries." ::= { g3pkcovpath 6 } g3pkcovpathEntry OBJECT-TYPE SYNTAX G3pkcovpathEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkcovpath entry containing objects of the g3pkcovpath information sent by the switch." INDEX { g3pkcovpathCoveragePath } ::= { g3pkcovpathTable 1 } G3pkcovpathEntry ::= SEQUENCE { g3pkcovpathCoveragePath INTEGER, g3pkcovpathMeasHour INTEGER, g3pkcovpathCallsOffTotal INTEGER, g3pkcovpathCallsOffAct INTEGER, g3pkcovpathCallsOffBusy INTEGER, g3pkcovpathCallsOffDA INTEGER, g3pkcovpathCallsOffCA INTEGER, g3pkcovpathCallsOffSAC INTEGER, g3pkcovpathCallsOffCB INTEGER, g3pkcovpathPoint1Ans DisplayString, g3pkcovpathPoint2Ans DisplayString, g3pkcovpathPoint3Ans DisplayString, g3pkcovpathPoint4Ans DisplayString, g3pkcovpathPoint5Ans DisplayString, g3pkcovpathPoint6Ans DisplayString, g3pkcovpathPoint1Aband DisplayString, g3pkcovpathPoint2Aband DisplayString, g3pkcovpathPoint3Aband DisplayString, g3pkcovpathPoint4Aband DisplayString, g3pkcovpathPoint5Aband DisplayString, g3pkcovpathPoint6Aband DisplayString } g3pkcovpathCoveragePath OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measured coverage path." ::= { g3pkcovpathEntry 1 } g3pkcovpathMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time of the hour during which the greatest number of calls are offered to the coverage path." ::= { g3pkcovpathEntry 2 } g3pkcovpathCallsOffTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path." ::= { g3pkcovpathEntry 3 } g3pkcovpathCallsOffAct OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal being active." ::= { g3pkcovpathEntry 4 } g3pkcovpathCallsOffBusy OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal being busy." ::= { g3pkcovpathEntry 5 } g3pkcovpathCallsOffDA OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path because the principal did not answer the call after the administered number of rings." ::= { g3pkcovpathEntry 6 } g3pkcovpathCallsOffCA OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal's use of Cover All." ::= { g3pkcovpathEntry 7 } g3pkcovpathCallsOffSAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path due to the principal's use of Send All Calls or the calling party using Go To Coverage." ::= { g3pkcovpathEntry 8 } g3pkcovpathCallsOffCB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the coverage path where the calling party used LWC or ACB before a coverage point answered the call." ::= { g3pkcovpathEntry 9 } g3pkcovpathPoint1Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3pkcovpathEntry 10 } g3pkcovpathPoint2Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3pkcovpathEntry 11 } g3pkcovpathPoint3Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3pkcovpathEntry 12 } g3pkcovpathPoint4Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3pkcovpathEntry 13 } g3pkcovpathPoint5Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3pkcovpathEntry 14 } g3pkcovpathPoint6Ans OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls answered by the specified point." ::= { g3pkcovpathEntry 15 } g3pkcovpathPoint1Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3pkcovpathEntry 16 } g3pkcovpathPoint2Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3pkcovpathEntry 17 } g3pkcovpathPoint3Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3pkcovpathEntry 18 } g3pkcovpathPoint4Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3pkcovpathEntry 19 } g3pkcovpathPoint5Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3pkcovpathEntry 20 } g3pkcovpathPoint6Aband OBJECT-TYPE SYNTAX DisplayString (SIZE (0..4)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls abandoned by the caller while ringing at the specified point." ::= { g3pkcovpathEntry 21 } -- the g3principal group g3principalTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3principalTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3principal 1 } g3principalTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3principalTage and g3principalTintvl objects to determine whether it should refresh the data." ::= { g3principal 2 } g3principalTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3principal 3 } g3principalTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3principal 4 } g3principalTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3principal 5 } g3principalTable OBJECT-TYPE SYNTAX SEQUENCE OF G3principalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3principal entries." ::= { g3principal 6 } g3principalEntry OBJECT-TYPE SYNTAX G3principalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3principal entry containing objects of the g3principal information sent by the switch." INDEX { g3principalExtensionTAC } ::= { g3principalTable 1 } G3principalEntry ::= SEQUENCE { g3principalExtensionTAC DisplayString, g3principalMeasHour INTEGER, g3principalCallsOffTotal INTEGER, g3principalCallsAband INTEGER, g3principalCallsRedirect INTEGER, g3principalCallsCAC INTEGER, g3principalCallsCBC INTEGER, g3principalCallsCDAC INTEGER, g3principalCallsCCAC INTEGER, g3principalCallsCSAC INTEGER, g3principalCallsCSCB INTEGER, g3principalCovPath1 INTEGER, g3principalCovPath2 INTEGER, g3principalCovPath3 INTEGER, g3principalCovPath4 INTEGER, g3principalCovPath5 INTEGER, g3principalCovPath6 INTEGER, g3principalCovPath7 INTEGER, g3principalCovPath8 INTEGER } g3principalExtensionTAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measured coverage path." ::= { g3principalEntry 1 } g3principalMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time of the hour during which the greatest number of calls are offered to the principal." ::= { g3principalEntry 2 } g3principalCallsOffTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the principal. path." ::= { g3principalEntry 3 } g3principalCallsAband OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of abandoned calls, where the calling party hung up before the call was answered or sent to coverage." ::= { g3principalEntry 4 } g3principalCallsRedirect OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls not answered by the principal and subsequently sent to coverage." ::= { g3principalEntry 5 } g3principalCallsCAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal due to the principal being active." ::= { g3principalEntry 6 } g3principalCallsCBC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls to coverage by this principal due to the principal being busy." ::= { g3principalEntry 7 } g3principalCallsCDAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal because the principal didn't answer the call after the administered number of rings." ::= { g3principalEntry 8 } g3principalCallsCCAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal due to the principal's use of Cover All." ::= { g3principalEntry 9 } g3principalCallsCSAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal due to the principal's use of Send All Calls, or because the calling party used the Go To Cover feature." ::= { g3principalEntry 10 } g3principalCallsCSCB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to this principal where the calling party used LWC or ACB before the principal answered the call and before it went to coverage." ::= { g3principalEntry 11 } g3principalCovPath1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 12 } g3principalCovPath2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 13 } g3principalCovPath3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 14 } g3principalCovPath4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 15 } g3principalCovPath5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 16 } g3principalCovPath6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 17 } g3principalCovPath7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 18 } g3principalCovPath8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3principalEntry 19 } -- the g3pkprincipal group g3pkprincipalTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3principalTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3pkprincipal 1 } g3pkprincipalTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3principalTage and g3principalTintvl objects to determine whether it should refresh the data." ::= { g3pkprincipal 2 } g3pkprincipalTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3pkprincipal 3 } g3pkprincipalTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3pkprincipal 4 } g3pkprincipalTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3pkprincipal 5 } g3pkprincipalTable OBJECT-TYPE SYNTAX SEQUENCE OF G3pkprincipalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3pkprincipal entries." ::= { g3pkprincipal 6 } g3pkprincipalEntry OBJECT-TYPE SYNTAX G3pkprincipalEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3pkprincipal entry containing objects of the g3pkprincipal information sent by the switch." INDEX { g3pkprincipalExtensionTAC } ::= { g3pkprincipalTable 1 } G3pkprincipalEntry ::= SEQUENCE { g3pkprincipalExtensionTAC DisplayString, g3pkprincipalMeasHour INTEGER, g3pkprincipalCallsOffTotal INTEGER, g3pkprincipalCallsAband INTEGER, g3pkprincipalCallsRedirect INTEGER, g3pkprincipalCallsCAC INTEGER, g3pkprincipalCallsCBC INTEGER, g3pkprincipalCallsCDAC INTEGER, g3pkprincipalCallsCCAC INTEGER, g3pkprincipalCallsCSAC INTEGER, g3pkprincipalCallsCSCB INTEGER, g3pkprincipalCovPath1 INTEGER, g3pkprincipalCovPath2 INTEGER, g3pkprincipalCovPath3 INTEGER, g3pkprincipalCovPath4 INTEGER, g3pkprincipalCovPath5 INTEGER, g3pkprincipalCovPath6 INTEGER, g3pkprincipalCovPath7 INTEGER, g3pkprincipalCovPath8 INTEGER } g3pkprincipalExtensionTAC OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the measured coverage path." ::= { g3pkprincipalEntry 1 } g3pkprincipalMeasHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the starting time of the hour during which the greatest number of calls are offered to the principal." ::= { g3pkprincipalEntry 2 } g3pkprincipalCallsOffTotal OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to the principal. path." ::= { g3pkprincipalEntry 3 } g3pkprincipalCallsAband OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of abandoned calls, where the calling party hung up before the call was answered or sent to coverage." ::= { g3pkprincipalEntry 4 } g3pkprincipalCallsRedirect OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the total number of calls not answered by the principal and subsequently sent to coverage." ::= { g3pkprincipalEntry 5 } g3pkprincipalCallsCAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal due to the principal being active." ::= { g3pkprincipalEntry 6 } g3pkprincipalCallsCBC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls to coverage by this principal due to the principal being busy." ::= { g3pkprincipalEntry 7 } g3pkprincipalCallsCDAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal because the principal didn't answer the call after the administered number of rings." ::= { g3pkprincipalEntry 8 } g3pkprincipalCallsCCAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal due to the principal's use of Cover All." ::= { g3pkprincipalEntry 9 } g3pkprincipalCallsCSAC OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls sent to coverage by this principal due to the principal's use of Send All Calls, or because the calling party used the Go To Cover feature." ::= { g3pkprincipalEntry 10 } g3pkprincipalCallsCSCB OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of calls offered to this principal where the calling party used LWC or ACB before the principal answered the call and before it went to coverage." ::= { g3pkprincipalEntry 11 } g3pkprincipalCovPath1 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 12 } g3pkprincipalCovPath2 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 13 } g3pkprincipalCovPath3 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 14 } g3pkprincipalCovPath4 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 15 } g3pkprincipalCovPath5 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 16 } g3pkprincipalCovPath6 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 17 } g3pkprincipalCovPath7 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 18 } g3pkprincipalCovPath8 OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a coverage path used by this principal." ::= { g3pkprincipalEntry 19 } -- the g3esmain group g3esmainTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3esmainTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3esmain 1 } g3esmainTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3esmainTage and g3esmainTintvl objects to determine whether it should refresh the data." ::= { g3esmain 2 } g3esmainTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3esmain 3 } g3esmainTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3esmain 4 } g3esmainTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3esmain 5 } g3esmainTable OBJECT-TYPE SYNTAX SEQUENCE OF G3esmainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3esmain entries." ::= { g3esmain 6 } g3esmainEntry OBJECT-TYPE SYNTAX G3esmainEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3esmain entry containing objects of the g3esmain information sent by the switch." INDEX { g3esmainClusterId } ::= { g3esmainTable 1 } G3esmainEntry ::= SEQUENCE { g3esmainClusterId INTEGER, g3esmainPlatformType DisplayString, g3esmainServerAId DisplayString, g3esmainServerAIP1 DisplayString, g3esmainServerAIP2 DisplayString, g3esmainServerAIP3 DisplayString, g3esmainServerAIP4 DisplayString, g3esmainServerBId DisplayString, g3esmainServerBIP1 DisplayString, g3esmainServerBIP2 DisplayString, g3esmainServerBIP3 DisplayString, g3esmainServerBIP4 DisplayString, g3esmainPriorityScore DisplayString, g3esmainNetComm DisplayString, g3esmainSystemPref DisplayString, g3esmainLocalPref DisplayString, g3esmainLocalOnly DisplayString } g3esmainClusterId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the unique module id, for the main server, from the license file for this cluster." ::= { g3esmainEntry 1 } g3esmainPlatformType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the platform type (S8500 or S8700)." ::= { g3esmainEntry 2 } g3esmainServerAId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Server A id field. Acceptable values are 1-999 and it must be unique." ::= { g3esmainEntry 3 } g3esmainServerAIP1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first part of the IP Address for Server A." ::= { g3esmainEntry 4 } g3esmainServerAIP2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second part of the IP Address for Server A." ::= { g3esmainEntry 5 } g3esmainServerAIP3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third part of the IP Address for Server A." ::= { g3esmainEntry 6 } g3esmainServerAIP4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the last part of the IP Address for Server A." ::= { g3esmainEntry 7 } g3esmainServerBId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Server B id field. Acceptable values are 1-999 and it must be unique (only available if the platform type is S8700)." ::= { g3esmainEntry 8 } g3esmainServerBIP1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first part of the IP Address for Server B." ::= { g3esmainEntry 9 } g3esmainServerBIP2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second part of the IP Address for Server B." ::= { g3esmainEntry 10 } g3esmainServerBIP3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third part of the IP Address for Server B." ::= { g3esmainEntry 11 } g3esmainServerBIP4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the last part of the IP Address for Server B." ::= { g3esmainEntry 12 } g3esmainPriorityScore OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a numerical value that allows the customer to assign a preferred cluster (can accept values of 1-100; default is blank)." ::= { g3esmainEntry 13 } g3esmainNetComm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the region the ESS cluster is in (used for localization; can have values between 1-64; default is 1)." ::= { g3esmainEntry 14 } g3esmainSystemPref OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service on a system-wide basis (values can be 'y' or 'n'; default is 'y')." ::= { g3esmainEntry 15 } g3esmainLocalPref OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service in the same network community before clusters in other network communities would be selected (values can be 'y' or 'n'; default is 'n')." ::= { g3esmainEntry 16 } g3esmainLocalOnly OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag indicating that only clusters in the same network community can provide service (values can be 'y' or 'n'; default is 'n')." ::= { g3esmainEntry 17 } -- the g3esservers group g3esserversTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3esserversTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3esservers 1 } g3esserversTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3esserversTage and g3esserversTintvl objects to determine whether it should refresh the data." ::= { g3esservers 2 } g3esserversTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3esservers 3 } g3esserversTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3esservers 4 } g3esserversTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3esservers 5 } g3esserversTable OBJECT-TYPE SYNTAX SEQUENCE OF G3esserversEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3esservers entries." ::= { g3esservers 6 } g3esserversEntry OBJECT-TYPE SYNTAX G3esserversEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3esservers entry containing objects of the g3esservers information sent by the switch." INDEX { g3esserversClusterId } ::= { g3esserversTable 1 } G3esserversEntry ::= SEQUENCE { g3esserversClusterId INTEGER, g3esserversPlatformType DisplayString, g3esserversServerAId DisplayString, g3esserversServerAIP1 DisplayString, g3esserversServerAIP2 DisplayString, g3esserversServerAIP3 DisplayString, g3esserversServerAIP4 DisplayString, g3esserversServerBId DisplayString, g3esserversServerBIP1 DisplayString, g3esserversServerBIP2 DisplayString, g3esserversServerBIP3 DisplayString, g3esserversServerBIP4 DisplayString, g3esserversPriorityScore DisplayString, g3esserversNetComm DisplayString, g3esserversSystemPref DisplayString, g3esserversLocalPref DisplayString, g3esserversLocalOnly DisplayString, g3esserversServerANodeName DisplayString, g3esserversServerBNodeName DisplayString } g3esserversClusterId OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the unique module id, for the enterprise survivable server, from the license file for this cluster." ::= { g3esserversEntry 1 } g3esserversPlatformType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the platform type (S8500 or S8700)." ::= { g3esserversEntry 2 } g3esserversServerAId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Server A id field. Acceptable values are 1-999 and it must be unique." ::= { g3esserversEntry 3 } g3esserversServerAIP1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first part of the IP Address for Server A. This field is now obsolete. The g3esserversServerANodeName field replaces the IP address." ::= { g3esserversEntry 4 } g3esserversServerAIP2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second part of the IP Address for Server A. This field is now obsolete. The g3esserversServerANodeName field replaces the IP address." ::= { g3esserversEntry 5 } g3esserversServerAIP3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third part of the IP Address for Server A. This field is now obsolete. The g3esserversServerANodeName field replaces the IP address." ::= { g3esserversEntry 6 } g3esserversServerAIP4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the last part of the IP Address for Server A. This field is now obsolete. The g3esserversServerANodeName field replaces the IP address." ::= { g3esserversEntry 7 } g3esserversServerBId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the Server B id field. Acceptable values are 1-999 and it must be unique (only available if the platform type is S8700)." ::= { g3esserversEntry 8 } g3esserversServerBIP1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the first part of the IP Address for Server B. This field is now obsolete. The g3esserversServerBNodeName field replaces the IP address." ::= { g3esserversEntry 9 } g3esserversServerBIP2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the second part of the IP Address for Server B. This field is now obsolete. The g3esserversServerBNodeName field replaces the IP address." ::= { g3esserversEntry 10 } g3esserversServerBIP3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the third part of the IP Address for Server B. This field is now obsolete. The g3esserversServerBNodeName field replaces the IP address." ::= { g3esserversEntry 11 } g3esserversServerBIP4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the last part of the IP Address for Server B. This field is now obsolete. The g3esserversServerBNodeName field replaces the IP address." ::= { g3esserversEntry 12 } g3esserversPriorityScore OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a numerical value that allows the customer to assign a preferred cluster (can accept values of 1-100; default is blank)." ::= { g3esserversEntry 13 } g3esserversNetComm OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the region the ESS cluster is in (used for localization; can have values between 1-64; default is 1)." ::= { g3esserversEntry 14 } g3esserversSystemPref OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service on a system-wide basis (values can be 'y' or 'n'; default is 'y')." ::= { g3esserversEntry 15 } g3esserversLocalPref OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag that provides the cluster with a weighting factor that makes it a candidate to provide service in the same network community before clusters in other network communities would be selected (values can be 'y' or 'n'; default is 'n')." ::= { g3esserversEntry 16 } g3esserversLocalOnly OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a flag indicating that only clusters in the same network community can provide service (values can be 'y' or 'n'; default is 'n')." ::= { g3esserversEntry 17 } g3esserversServerANodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the node name of Server A." ::= { g3esserversEntry 18 } g3esserversServerBNodeName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the node name of Server B." ::= { g3esserversEntry 19 } -- the g3esparms group g3esparmsTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3esparmsTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3esparms 1 } g3esparmsTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3esparmsTage and g3esparmsTintvl objects to determine whether it should refresh the data." ::= { g3esparms 2 } g3esparmsTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3esparms 3 } g3esparmsTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3esparms 4 } g3esparmsTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3esparms 5 } g3esparmsNetCommunity1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a network community value for the corresponding port network (can have values between 1-64; default is 1)." ::= { g3esparms 6 } g3esparmsNetCommunity2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 7 } g3esparmsNetCommunity3 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 8 } g3esparmsNetCommunity4 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 9 } g3esparmsNetCommunity5 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 10 } g3esparmsNetCommunity6 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 11 } g3esparmsNetCommunity7 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 12 } g3esparmsNetCommunity8 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 13 } g3esparmsNetCommunity9 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 14 } g3esparmsNetCommunity10 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 15 } g3esparmsNetCommunity11 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 16 } g3esparmsNetCommunity12 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 17 } g3esparmsNetCommunity13 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 18 } g3esparmsNetCommunity14 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 19 } g3esparmsNetCommunity15 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 20 } g3esparmsNetCommunity16 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 21 } g3esparmsNetCommunity17 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 22 } g3esparmsNetCommunity18 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 23 } g3esparmsNetCommunity19 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 24 } g3esparmsNetCommunity20 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 25 } g3esparmsNetCommunity21 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 26 } g3esparmsNetCommunity22 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 27 } g3esparmsNetCommunity23 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 28 } g3esparmsNetCommunity24 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 29 } g3esparmsNetCommunity25 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 30 } g3esparmsNetCommunity26 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 31 } g3esparmsNetCommunity27 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 32 } g3esparmsNetCommunity28 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 33 } g3esparmsNetCommunity29 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 34 } g3esparmsNetCommunity30 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 35 } g3esparmsNetCommunity31 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 36 } g3esparmsNetCommunity32 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 37 } g3esparmsNetCommunity33 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 38 } g3esparmsNetCommunity34 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 39 } g3esparmsNetCommunity35 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 40 } g3esparmsNetCommunity36 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 41 } g3esparmsNetCommunity37 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 42 } g3esparmsNetCommunity38 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 43 } g3esparmsNetCommunity39 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 44 } g3esparmsNetCommunity40 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 45 } g3esparmsNetCommunity41 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 46 } g3esparmsNetCommunity42 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 47 } g3esparmsNetCommunity43 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 48 } g3esparmsNetCommunity44 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 49 } g3esparmsNetCommunity45 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 50 } g3esparmsNetCommunity46 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 51 } g3esparmsNetCommunity47 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 52 } g3esparmsNetCommunity48 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 53 } g3esparmsNetCommunity49 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 54 } g3esparmsNetCommunity50 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 55 } g3esparmsNetCommunity51 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 56 } g3esparmsNetCommunity52 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 57 } g3esparmsNetCommunity53 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 58 } g3esparmsNetCommunity54 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 59 } g3esparmsNetCommunity55 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 60 } g3esparmsNetCommunity56 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 61 } g3esparmsNetCommunity57 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 62 } g3esparmsNetCommunity58 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 63 } g3esparmsNetCommunity59 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 64 } g3esparmsNetCommunity60 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 65 } g3esparmsNetCommunity61 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 66 } g3esparmsNetCommunity62 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 67 } g3esparmsNetCommunity63 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 68 } g3esparmsNetCommunity64 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "See DESCRIPTION of g3esparmsNetCommunity1." ::= { g3esparms 69 } g3esparmsAutoReturn OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the state of auto return (values can be 'y' (yes), 'n' (no), or 's' (scheduled); default is 'n')." ::= { g3esparms 70 } g3esparmsDay OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the day of the week Saturday through Sunday (or every day) on which the auto return will occur (only applicable if AutoReturn is set to scheduled)." ::= { g3esparms 71 } g3esparmsHour OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the hour of the day (0-23) at which the auto return will occur (only applicable if AutoReturn is set to scheduled)." ::= { g3esparms 72 } g3esparmsMinute OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the minute of the hour (0-59) at which the auto return will occur (only applicable if AutoReturn is set to scheduled)." ::= { g3esparms 73 } g3esparmsNoServerTO OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing a no service timeout interval indicating when the fail over will occur (can have values between 3-15 minutes; default is 5 minutes)." ::= { g3esparms 74 } g3esparmsIPSIConnUp OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the number of minutes that an IPSI in a Port Network has a connection to the Main server and the Port Network is available for auto-return (can have values between 3-120 or blank if the g3esparmsAutoReturn field is not set to 'y')." ::= { g3esparms 75 } -- the g3mgrecrule group g3mgrecruleTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the coverage path data was last extracted from the switch by the Proxy Agent. This object along with the g3mgrecruleTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the Proxy Agent extracts the data from the switch." ::= { g3mgrecrule 1 } g3mgrecruleTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the Proxy Agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3mgrecruleTage and g3mgrecruleTintvl objects to determine whether it should refresh the data." ::= { g3mgrecrule 2 } g3mgrecruleTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3mgrecrule 3 } g3mgrecruleTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3mgrecrule 4 } g3mgrecruleTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3mgrecrule 5 } g3mgrecruleTable OBJECT-TYPE SYNTAX SEQUENCE OF G3mgrecruleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3mgrecrule entries." ::= { g3mgrecrule 6 } g3mgrecruleEntry OBJECT-TYPE SYNTAX G3mgrecruleEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3mgrecrule entry containing objects of the g3mgrecrule information sent by the switch." INDEX { g3mgrecruleGatewayNbr } ::= { g3mgrecruleTable 1 } G3mgrecruleEntry ::= SEQUENCE { g3mgrecruleGatewayNbr INTEGER, g3mgrecruleGatewayName DisplayString, g3mgrecruleRecRule DisplayString } g3mgrecruleGatewayNbr OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the media gateway number (1-250)." ::= { g3mgrecruleEntry 1 } g3mgrecruleGatewayName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the name of the media gateway." ::= { g3mgrecruleEntry 2 } g3mgrecruleRecRule OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the recovery rule type that has been selected for the media gateway (possible values are 'immediately', '0-active-calls', 'time-day-window', or 'time-window-OR-0-active-calls'." ::= { g3mgrecruleEntry 3 } -- the g3commproc group g3commprocTage OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The number of timeticks since the processor channel data was last extracted from the switch by the Proxy Agent. This object along with the g3commprocTintvl object allows the Network Manager to determine the validity of the data in the cache and to control when the agent extracts the data from the switch." ::= { g3commproc 1 } g3commprocTintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An object containing the interval for which the data extracted from the switch is considered valid by the agent. When a GET or GET-NEXT request for the data is received by the agent it uses the g3commprocTage and g3commprocTintvl objects to determine whether it should refresh the data." ::= { g3commproc 2 } g3commprocTdelay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the delay encountered in updating the cached data." ::= { g3commproc 3 } g3commprocTretrieve OBJECT-TYPE SYNTAX INTEGER { failed(1), -- cache data is corrupted update(2), -- update the cached data current(3) -- cached data is current } ACCESS read-write STATUS mandatory DESCRIPTION "An object containing a flag that is 'update' if the cached data is being retrieved and otherwise 'current'.This object may be set to 'update' to force a refresh of the cache." ::= { g3commproc 4 } g3commprocTcount OBJECT-TYPE SYNTAX Gauge ACCESS read-only STATUS mandatory DESCRIPTION "A Gauge object containing the number of data records in the cache." ::= { g3commproc 5 } g3commprocTable OBJECT-TYPE SYNTAX SEQUENCE OF G3commprocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3commproc entries." ::= { g3commproc 6 } g3commprocEntry OBJECT-TYPE SYNTAX G3commprocEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3commproc entry containing objects of the g3commproc information sent by the switch." INDEX { g3commprocProcChan } ::= { g3commprocTable 1 } G3commprocEntry ::= SEQUENCE { g3commprocProcChan INTEGER, g3commprocEnable DisplayString, g3commprocApplication DisplayString, g3commprocGatewayTo DisplayString, g3commprocMode DisplayString, g3commprocInterfaceLink DisplayString, g3commprocInterfaceChan DisplayString, g3commprocDestNode DisplayString, g3commprocTempA DisplayString, g3commprocTempB DisplayString, g3commprocDestPort DisplayString, g3commprocSessionLocal DisplayString, g3commprocSessionRemote DisplayString, g3commprocMachID DisplayString } g3commprocProcChan OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the processor channel (1-384)." ::= { g3commprocEntry 1 } g3commprocEnable OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing whether the processor channel is enabled (y or n)." ::= { g3commprocEntry 2 } g3commprocApplication OBJECT-TYPE SYNTAX DisplayString (SIZE (0..8)) ACCESS read-only STATUS mandatory DESCRIPTION "An object containing the application type or adjunct connection used on the channel. Allowed values are 'audix', 'dcs', 'echo', 'fp-mwi', 'gateway', 'mis', and 'qsig-mwi'." ::= { g3commprocEntry 3 } g3commprocGatewayTo OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object identifying which processor channel the specific processor channel is serving as a gateway to (1-384 or blank)." ::= { g3commprocEntry 4 } g3commprocMode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..1)) ACCESS read-only STATUS mandatory DESCRIPTION "An object specifying the mode of the IP session (values include 'c' for client, 's' for server, or blank)." ::= { g3commprocEntry 5 } g3commprocInterfaceLink OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that identifies the physical link carrying the processor channel (values include 1-99, 'p' for processor, or blank)." ::= { g3commprocEntry 6 } g3commprocInterfaceChan OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that identifies the channel number of the TCP/IP listen port channel to carry the processor channel (values 1-64 for link type x.25, 0 or 5000-64500 for ethernet or ppp with 0 meaning any port can be used)." ::= { g3commprocEntry 7 } g3commprocDestNode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that identifies the server or adjunct at the far end of the link (values include either an adjunct name, server name, far end IP address, node name, or blank for local services)." ::= { g3commprocEntry 8 } g3commprocTempA OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object internally used by the agent for data storage (will always return blank)." ::= { g3commprocEntry 9 } g3commprocTempB OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "An object internally used by the agent for data storage (will always return blank)." ::= { g3commprocEntry 10 } g3commprocDestPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that identifies the port number of the destination (values 0 or 5000-64500 where 0 meaning any port can be used)." ::= { g3commprocEntry 11 } g3commprocSessionLocal OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that specifies the local session number (1-384 or blank)." ::= { g3commprocEntry 12 } g3commprocSessionRemote OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that specifies the remote session number (1-384 or blank)." ::= { g3commprocEntry 13 } g3commprocMachID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..2)) ACCESS read-only STATUS mandatory DESCRIPTION "An object that identifies the destination server ID defined on the dial plan of the destination server (values 1-99 or blank)." ::= { g3commprocEntry 14 } -- the g3intvl group g3intvltrkSleepintvl OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Sleep interval to be used between successive ossi requests. The SleepIntvl should be specified in terms of millisecs. Currently this interval will be used for g3trunksta MIB group only." ::= { g3intvl 1 } g3intvltrkSleepflag OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "Flag indicating whether sleep is to be induced or not while doing a walk." ::= { g3intvl 2 } -- the busyrls group g3busyrlsAction OBJECT-TYPE SYNTAX INTEGER { busyout(1), -- busyout specified object release(2), -- release specified object campon-busyout(3) -- campon-busyout specified object } ACCESS read-write STATUS mandatory DESCRIPTION "The last action performed on a specified object. This field must be set in conjunction with the g3busyrlsObject field." ::= { g3busyrls 1 } g3busyrlsObject OBJECT-TYPE SYNTAX INTEGER { trunk(1), -- trunk group/member object board(2), -- board/port on board object media-processor(3) -- media-processor object } ACCESS read-write STATUS mandatory DESCRIPTION "The object associated with the last action. This field must be set in conjunction with the g3busyrlsTrunkGroup, g3busyrlsTrunkMember, g3busyrlsBoard, and g3busyrlsPort fields. This field can only be set to 'media-processor' if g3busyrlsAction is either 'campon-busyout' or 'release'." ::= { g3busyrls 2 } g3busyrlsTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The trunk group number associated with the g3busyrlsObject field. This field is only applicable if the g3busyrlsObject field is set to 'trunk'." ::= { g3busyrls 3 } g3busyrlsTrunkMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The trunk group member associated with the g3busyrlsObject field. This field is only applicable if the g3busyrlsObject field is set to 'trunk'. This field either contains a trunk member number (1-255) or a '0' if an entire trunk group (all members) is to be operated on by the last action." ::= { g3busyrls 4 } g3busyrlsBoard OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString that uniquely identifies a board location (cabinet(01-22):carrier(A-E):slot(01-20)) associated with the g3busyrlsObject field. This field is only applicable if the g3busyrlsObject field is set to 'board' or 'media-processor'." ::= { g3busyrls 5 } g3busyrlsPort OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "The port location associated with the g3busyrlsObject field. This field is only applicable if the g3busyrlsObject field is set to 'board'. This field either contains a port location number (1-24) or a '0' if an entire board (all ports on the board) are to be operated on by the last action." ::= { g3busyrls 6 } -- the g3client group g3clientTable OBJECT-TYPE SYNTAX SEQUENCE OF G3clientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3client entries." ::= { g3client 1 } g3clientEntry OBJECT-TYPE SYNTAX G3clientEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3client entry containing objects of the g3client information for the G3 Proxy Agent." INDEX { g3clientTableIndex } ::= { g3clientTable 1 } G3clientEntry ::= SEQUENCE { g3clientCommunity DisplayString, g3clientCustomerId DisplayString, g3clientDescription DisplayString, g3clientExternalName DisplayString, g3clientConnectStatus DisplayString, g3clientTableIndex INTEGER, g3clientSubmapType INTEGER, g3clientState INTEGER, g3clientSubmapName DisplayString, g3clientConnectType DisplayString, g3clientDynamicTimeout INTEGER, g3clientEnumType INTEGER, g3clientEnumState INTEGER, g3clientDialString1 DisplayString, g3clientDialString2 DisplayString, g3clientProductID DisplayString } g3clientCommunity OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Community substring for a G3 client." ::= { g3clientEntry 1 } g3clientCustomerId OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Customer ID for a G3 client." ::= { g3clientEntry 2 } g3clientDescription OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Description for a G3 client." ::= { g3clientEntry 3 } g3clientExternalName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the External Name for a G3 client." ::= { g3clientEntry 4 } g3clientConnectStatus OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Connection Status for a G3 client." ::= { g3clientEntry 5 } g3clientSubmapType OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "The type of submap on which the managed node icon is to be placed on the NMS ('generic' = '0', 'usa' = '1', and 'custom' = '2')." ::= { g3clientEntry 6 } g3clientState OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing a numeric value representing the state in which to place the managed node icon on the NMS if the g3connectSubmapType is set to 'usa' ('Alabama' = '0', 'Alaska' = 1, . . . 'Wyoming' = 49)." ::= { g3clientEntry 7 } g3clientSubmapName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the submap name in which to place the managed node icon on the NMS if g3clientSubmapType is set to 'custom'." ::= { g3clientEntry 8 } g3clientConnectType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..7)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the Connection Type for a G3 client." ::= { g3clientEntry 9 } g3clientDynamicTimeout OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the number of idle minutes to wait before a dynamic connection is dropped." ::= { g3clientEntry 10 } g3clientEnumType OBJECT-TYPE SYNTAX INTEGER { generic(1), usa(2), custom(3) } ACCESS read-only STATUS mandatory DESCRIPTION "The enumerated type of submap on which the managed node icon is to be placed on the NMS." ::= { g3clientEntry 11 } g3clientEnumState OBJECT-TYPE SYNTAX INTEGER { alabama(1), alaska(2), arizona(3), arkansas(4), california(5), colorado(6), connecticut(7), delaware(8), florida(9), georgia(10), hawaii(11), idaho(12), illinois(13), indiana(14), iowa(15), kansas(16), kentucky(17), louisiana(18), maine(19), maryland(20), massachusetts(21), michigan(22), minnesota(23), mississippi(24), missouri(25), montana(26), nebraska(27), nevada(28), new-hampshire(29), new-jersey(30), new-mexico(31), new-york(32), north-carolina(33), north-dakota(34), ohio(35), oklahoma(36), oregon(37), pennsylvania(38), rhode-island(39), south-carolina(40), south-dakota(41), tennessee(42), texas(43), utah(44), vermont(45), virginia(46), washington(47), west-virginia(48), wisconsin(49), wyoming(50) } ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing an enumerated value of the state in which to place the managed node icon on the NMS if the g3connectEnumType is set to 'usa'." ::= { g3clientEntry 12 } g3clientDialString1 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the first dial string administered for the managed node." ::= { g3clientEntry 13 } g3clientDialString2 OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the second dial string administered for the managed node." ::= { g3clientEntry 14 } g3clientProductID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the product ID of the managed node." ::= { g3clientEntry 15 } g3clientTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the G3 client entry." ::= { g3clientEntry 16 } -- the g3agent group g3agentSubmapType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing a value that indicates the default type of submap used in administering managed node locations ('generic', 'usa', or 'custom')." ::= { g3agent 1 } g3agentState OBJECT-TYPE SYNTAX DisplayString (SIZE (0..3)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing a value that indicates the default state used in administering managed node locations if the g3agentSubmapType field is set to 'usa'." ::= { g3agent 2 } g3agentSubmapName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..40)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object that contains the default Submap Name used in administering managed node locations if the g3agentSubmapType field is set to 'custom'." ::= { g3agent 3 } g3agentRelease OBJECT-TYPE SYNTAX DisplayString (SIZE (0..11)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the release of the Proxy Agent." ::= { g3agent 4 } g3agentDomainName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the Domain Name of the Proxy Agent." ::= { g3agent 5 } g3agentSnmpPolling OBJECT-TYPE SYNTAX INTEGER { on(1), -- definity snmp polling active off(2) -- definity snmp polling inactive } ACCESS read-only STATUS mandatory DESCRIPTION "This field identifies whether or not the Proxy Agent is configured to connect to and poll G3, ECS, and MCU node types for data. The value of this field is determined at installation time or set by services personnel in the field. If this field is on, by default the g3agentSnmpTraps field is also turned on. If it is turned off, g3agentSnmpTraps can either be turned on or off." ::= { g3agent 6 } g3agentSnmpTraps OBJECT-TYPE SYNTAX INTEGER { on(1), -- definity snmp traps active off(2) -- definity snmp traps inactive } ACCESS read-only STATUS mandatory DESCRIPTION "This field identifies whether or not the Agent is configured to provide SNMP traps to the NMS." ::= { g3agent 7 } g3agentSnmpSet OBJECT-TYPE SYNTAX INTEGER { on(1), -- definity snmp sets active off(2) -- definity snmp sets inactive } ACCESS read-only STATUS mandatory DESCRIPTION "This field identifies whether or not the Proxy Agent is configured to provide the customer with limited ability to perform some maintenance commands on G3, ECS, and MCU node types. The value of this field is determined at installation time or set by services personnel in the field. Since the Proxy Agent does not currently support a secure version of SNMP, this field should only be turned on if security is not an issue." ::= { g3agent 8 } g3agentActiveName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the name of the aliased active server." ::= { g3agent 9 } g3agentActiveIP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the IP address of the aliased active server." ::= { g3agent 10 } g3agentServer1Name OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the name of server 1." ::= { g3agent 11 } g3agentServer1IP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the IP address of server 1." ::= { g3agent 12 } g3agentServer1State OBJECT-TYPE SYNTAX INTEGER { active(1), -- server currently active standby(2), -- server currently standby dormant(3), -- server not configured busyout(4) -- server busied out } ACCESS read-only STATUS mandatory DESCRIPTION "This field identifies whether server 1 is currently active or on standby." ::= { g3agent 13 } g3agentServer2Name OBJECT-TYPE SYNTAX DisplayString (SIZE (0..30)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the name of server 2." ::= { g3agent 14 } g3agentServer2IP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the IP address of server 2." ::= { g3agent 15 } g3agentServer2State OBJECT-TYPE SYNTAX INTEGER { active(1), -- server currently active standby(2), -- server currently standby dormant(3), -- server not configured busyout(4) -- server busied out } ACCESS read-only STATUS mandatory DESCRIPTION "This field identifies whether server 2 is currently active or on standby." ::= { g3agent 16 } g3agentCLANIP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the registration IP address for the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig and g3agentEssConfig variables)." ::= { g3agent 17 } g3agentPrim1IP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the file synchronization address for Server A of the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig and g3agentEssConfig variables)." ::= { g3agent 18 } g3agentPrim2IP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the file synchronization address for Server B of the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig and g3agentEssConfig variables)." ::= { g3agent 19 } g3agentServerType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the hardware server type." ::= { g3agent 20 } g3agentOfferType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the software offer type." ::= { g3agent 21 } g3agentLspConfig OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object indicating whether the switch is configured as an LSP (possible values are 'lsp8700', 'lsp8300', 'icc', and 'unset')." ::= { g3agent 22 } g3agentEssConfig OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object indicating whether the switch is configured as an ESS (possible values are 'ess8700', 'ess8500', 'main', and 'unset')." ::= { g3agent 23 } g3agentPrim3IP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the file synchronization address for the alternate Server A of the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig and g3agentEssConfig variables)." ::= { g3agent 24 } g3agentPrim4IP OBJECT-TYPE SYNTAX DisplayString (SIZE (0..16)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the file synchronization address for the alternate Server B of the LSP or ESS or blank (dependent on the values set in the g3agentLspConfig and g3agentEssConfig variables)." ::= { g3agent 25 } g3agentStdbyRefresh OBJECT-TYPE SYNTAX INTEGER { yes(1), -- Standby Server Refreshed no(2) -- Standby Server not Refreshed } ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString object containing the information whether the Standby Server is Refreshed or not and is it ready to go for an interchange." ::= { g3agent 26 } -- the g3trap group g3trapDestination OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString Object containing the trap destination IP address." ::= { g3trap 1 } g3trapFilterNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing the filter number for the specified trap destination IP address (1-500)." ::= { g3trap 2 } g3trapApplicationID OBJECT-TYPE SYNTAX INTEGER { fpm(1), -- Fault and Performance Manager cm-web(2), -- CM Maintenance Web Interface avaya-3(3), -- Avaya Reserved ID avaya-4(4), -- Avaya Reserved ID avaya-5(5), -- Avaya Reserved ID avaya-6(6), -- Avaya Reserved ID avaya-7(7), -- Avaya Reserved ID avaya-8(8), -- Avaya Reserved ID avaya-9(9), -- Avaya Reserved ID avaya-10(10), -- Avaya Reserved ID avaya-11(11), -- Avaya Reserved ID avaya-12(12), -- Avaya Reserved ID avaya-13(13), -- Avaya Reserved ID avaya-14(14), -- Avaya Reserved ID avaya-15(15), -- Avaya Reserved ID avaya-16(16), -- Avaya Reserved ID avaya-17(17), -- Avaya Reserved ID avaya-18(18), -- Avaya Reserved ID avaya-19(19), -- Avaya Reserved ID avaya-20(20), -- Avaya Reserved ID avaya-21(21), -- Avaya Reserved ID avaya-22(22), -- Avaya Reserved ID avaya-23(23), -- Avaya Reserved ID avaya-24(24), -- Avaya Reserved ID avaya-25(25), -- Avaya Reserved ID avaya-26(26), -- Avaya Reserved ID avaya-27(27), -- Avaya Reserved ID avaya-28(28), -- Avaya Reserved ID avaya-29(29), -- Avaya Reserved ID avaya-30(30), -- Avaya Reserved ID avaya-31(31), -- Avaya Reserved ID avaya-32(32), -- Avaya Reserved ID avaya-33(33), -- Avaya Reserved ID avaya-34(34), -- Avaya Reserved ID avaya-35(35), -- Avaya Reserved ID avaya-36(36), -- Avaya Reserved ID avaya-37(37), -- Avaya Reserved ID avaya-38(38), -- Avaya Reserved ID avaya-39(39), -- Avaya Reserved ID avaya-40(40), -- Avaya Reserved ID avaya-41(41), -- Avaya Reserved ID avaya-42(42), -- Avaya Reserved ID avaya-43(43), -- Avaya Reserved ID avaya-44(44), -- Avaya Reserved ID avaya-45(45), -- Avaya Reserved ID avaya-46(46), -- Avaya Reserved ID avaya-47(47), -- Avaya Reserved ID avaya-48(48), -- Avaya Reserved ID avaya-49(49), -- Avaya Reserved ID avaya-50(50), -- Avaya Reserved ID customer-51(51), -- Customer Reserved ID customer-52(52), -- Customer Reserved ID customer-53(53), -- Customer Reserved ID customer-54(54), -- Customer Reserved ID customer-55(55), -- Customer Reserved ID customer-56(56), -- Customer Reserved ID customer-57(57), -- Customer Reserved ID customer-58(58), -- Customer Reserved ID customer-59(59), -- Customer Reserved ID customer-60(60), -- Customer Reserved ID customer-61(61), -- Customer Reserved ID customer-62(62), -- Customer Reserved ID customer-63(63), -- Customer Reserved ID customer-64(64), -- Customer Reserved ID customer-65(65), -- Customer Reserved ID customer-66(66), -- Customer Reserved ID customer-67(67), -- Customer Reserved ID customer-68(68), -- Customer Reserved ID customer-69(69), -- Customer Reserved ID customer-70(70), -- Customer Reserved ID customer-71(71), -- Customer Reserved ID customer-72(72), -- Customer Reserved ID customer-73(73), -- Customer Reserved ID customer-74(74), -- Customer Reserved ID customer-75(75), -- Customer Reserved ID customer-76(76), -- Customer Reserved ID customer-77(77), -- Customer Reserved ID customer-78(78), -- Customer Reserved ID customer-79(79), -- Customer Reserved ID customer-80(80), -- Customer Reserved ID customer-81(81), -- Customer Reserved ID customer-82(82), -- Customer Reserved ID customer-83(83), -- Customer Reserved ID customer-84(84), -- Customer Reserved ID customer-85(85), -- Customer Reserved ID customer-86(86), -- Customer Reserved ID customer-87(87), -- Customer Reserved ID customer-88(88), -- Customer Reserved ID customer-89(89), -- Customer Reserved ID customer-90(90), -- Customer Reserved ID customer-91(91), -- Customer Reserved ID customer-92(92), -- Customer Reserved ID customer-93(93), -- Customer Reserved ID customer-94(94), -- Customer Reserved ID customer-95(95), -- Customer Reserved ID customer-96(96), -- Customer Reserved ID customer-97(97), -- Customer Reserved ID customer-98(98), -- Customer Reserved ID customer-99(99), -- Customer Reserved ID customer-100(100) -- Customer Reserved ID } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing an ID specifying from which application the filter was administered. This field can take on values of 1-100. IDs 1-50 are reserved for Avaya applications. IDs 51-100 can be customer-defined to allow a customer to identify the user or application that set up the filter. Use of an application ID reserved for Avaya, when the filter is being administered from a non-Avaya application, may cause handling of that alarm filter to operate incorrectly." ::= { g3trap 3 } g3trapOperation OBJECT-TYPE SYNTAX INTEGER { add-replace(1), -- add or replace filter delete(2) -- delete filter } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether the alarm filter is to be added or deleted from the set of filters." ::= { g3trap 4 } g3trapActive OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not active alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filters." ::= { g3trap 5 } g3trapResolved OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not resolved alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filters." ::= { g3trap 6 } g3trapMajor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not major alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filters." ::= { g3trap 7 } g3trapMinor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not minor alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filters." ::= { g3trap 8 } g3trapWarning OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not warning alarms are to have traps generated. It is defaulted to 'no'. This field only applies to CM and platform alarm filters." ::= { g3trap 9 } g3trapInterval OBJECT-TYPE SYNTAX INTEGER { hour(1), day(2), week(3), month(4), all(5) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the time window for which alarms are to be collected. This is an old field that is now obsolete." ::= { g3trap 10 } g3trapFromMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the month from which the alarm polling is to begin (1-12). This is an old field that is now obsolete." ::= { g3trap 11 } g3trapFromDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the day of the month from which the alarm polling is to begin (1-31). This is an old field that is now obsolete." ::= { g3trap 12 } g3trapFromHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the hour of the day from which the alarm polling is to begin (0-23). This is an old field that is now obsolete." ::= { g3trap 13 } g3trapFromMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the minute of the hour from which the alarm polling is to begin (0-59). This is an old field that is now obsolete." ::= { g3trap 14 } g3trapToMonth OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the month from which the alarm polling is to begin (1-12). This is an old field that is now obsolete." ::= { g3trap 15 } g3trapToDay OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the day of the month from which the alarm polling is to begin (1-31). This is an old field that is now obsolete." ::= { g3trap 16 } g3trapToHour OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the hour of the day from which the alarm polling is to begin (0-23). This is an old field that is now obsolete." ::= { g3trap 17 } g3trapToMinute OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the minute of the hour from which the alarm polling is to begin (0-59). This is an old field that is now obsolete." ::= { g3trap 18 } g3trapMediaGateway OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the media gateway number (1-250) for alarms to be trapped. This field only applies to CM alarm filters." ::= { g3trap 19 } g3trapCabinet OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the cabinet number (1-64) for alarms to be trapped. This field only applies to CM alarm filters." ::= { g3trap 20 } g3trapPortNetwork OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the port network number (1-64) for alarms to be trapped. This field only applies to CM alarm filters. It is a future place holder. Currently setting of this field is not allowed." ::= { g3trap 21 } g3trapBoardNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString Object containing the board number for alarms to be trapped. This field is of the form cabinet(1-64):carrier(A-E):slot(0-20) or gateway(1-250):module(V1-V9). This field only applies to CM alarm filters." ::= { g3trap 22 } g3trapPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "A DisplayString Object containing the port number for alarms to be trapped. This field is of the form cabinet(1-64):carrier(A-E):slot(0-20):circuit(1-256) or gateway(1-250):module(V1-V9):circuit(1-31). This field only applies to CM alarm filters." ::= { g3trap 23 } g3trapCategory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "This field contains the alarm category (if applicable). This field only applies to CM alarm filters." ::= { g3trap 24 } g3trapMaintenanceObject OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "This field contains the alarm maintenance object (if applicable). This field only applies to CM alarm filters." ::= { g3trap 25 } g3trapExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the extension number for alarms to be trapped. This field only applies to CM alarm filters." ::= { g3trap 26 } g3trapTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the trunk group number for alarms to be trapped (1-2000). This field only applies to CM alarm filters." ::= { g3trap 27 } g3trapTrunkMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the trunk member with a given trunk group for alarms to be trapped (1-255). This field only applies to CM alarm filters." ::= { g3trap 28 } g3trapErrorCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the error code for alarms to be trapped. This field only applies to CM alarm filters." ::= { g3trap 29 } g3trapAlarmType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the alarm type for alarms to be trapped. The allowed values are 'A' for application alarms, '*' for security alarms, 'S' for system alarms, or 'M' for system management alarms. This field only applies to platform alarm filters." ::= { g3trap 30 } g3trapAlarmSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-write STATUS mandatory DESCRIPTION "This field contains a string indicating the alarm source to be trapped. The possible values are defined in CM alarm maintenance rules. This field only applies to platform alarm filters." ::= { g3trap 31 } g3trapEventID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-write STATUS mandatory DESCRIPTION "This field contains an event ID associated with a specific alarm source to be trapped. Possible event ID values are documented in CM maintenance documentation. This field only applies to platform alarm filters." ::= { g3trap 32 } g3trapWarmRestart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not WARM restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notifications." ::= { g3trap 33 } g3trapCold2Restart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not COLD2 restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notifications." ::= { g3trap 34 } g3trapCold1Restart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not COLD1 restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notifications." ::= { g3trap 35 } g3trapReboot OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not REBOOT restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notifications." ::= { g3trap 36 } g3trapXReboot OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not XREBOOT restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notifications." ::= { g3trap 37 } g3trapHotPeiRestart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not HOTPEI restarts are to have traps generated. It is defaulted to 'no'. This field only applies to system restart notifications." ::= { g3trap 38 } g3trapInterchange OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not only restarts involving a interchange are to have traps generated. It can take on the values 'y' (only restarts involving an interchange are trapped), 'n' (only restarts involving no interchange are trapped), or '-' (don't care - in other words restarts are trapped regardless of whether an interchange occurred or not). It is defaulted to '-'. This field only applies to system restart notifications." ::= { g3trap 39 } g3trapCraftInitiated OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates whether or not restarts that are craft initiated are to have traps generated. It can take on the vaules 'y' (only craft initiated restarts are trapped), 'n' (only restarts that are not craft initiated are trapped), or '-' (don't care - in other workds restarts are trapped regardless of whether they were craft initiated or not). It is defaulted to '-'. This field only applies to system restart notifications." ::= { g3trap 40 } g3trapFilterType OBJECT-TYPE SYNTAX INTEGER { cm-alarm(1), platform-alarm(2), restart-notification(3) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the type of the filter. It is defaulted to a value of 'cm-alarm' if the user does not specify a filter type when adding a new filter." ::= { g3trap 41 } -- the g3filter group g3filterFilterStatus OBJECT-TYPE SYNTAX INTEGER { current(1), update(2), abort(3), save(4), clear(5), off(6), on(7) } ACCESS read-write STATUS mandatory DESCRIPTION "This field indicates the state of alarm trap filter table. A value of 'current' indicates that the set of alarm filters are up-to-date and active and that no filter updates, via the g3trap MIB group are currently taking place. A value of 'update' means that filter updates are taking place via SNMP sets of the g3trap MIB group variables. The rest of the values are settable by the user. When doing an SNMP set on this MIB variable the g3filterApplication field must also be set to indicate what application is requesting the set operation. For more details on that field a full description is provided further down in the MIB table. A value of 'abort' will cancelled any filter updates in progress and return the filter table to its original state before updates began. A value of 'save' will commit all pending filter updates and the new/modified set of filters will become active. A value of 'clear' will remove all active filters from the filter table for the specified application ID. A value of 'off' will turn off the alarm trap handling processes, abort any filter updates in process, but will continue to store the current set of active filters. It's value will display when an SNMP get request is made if the user had previously set the filter status to that value or if alarm trap handling is on but no active filters exist. A value of 'on' will reactivate the alarm trap handling processes using the currently stored set of active filters (by default the alarm trap handling processes turned on at agent startup if any active filters exist)." ::= { g3filter 1 } g3filterTable OBJECT-TYPE SYNTAX SEQUENCE OF G3filterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3filter entries." ::= { g3filter 2 } g3filterEntry OBJECT-TYPE SYNTAX G3filterEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3filter entry containing objects of the active filter information for CM alarms stored in the SNMP agent." INDEX { g3filterDestination, g3filterFilterNumber } ::= { g3filterTable 1 } G3filterEntry ::= SEQUENCE { g3filterDestination DisplayString, g3filterFilterNumber INTEGER, g3filterApplicationID INTEGER, g3filterActive INTEGER, g3filterResolved INTEGER, g3filterMajor INTEGER, g3filterMinor INTEGER, g3filterWarning INTEGER, g3filterMediaGateway INTEGER, g3filterCabinet INTEGER, g3filterPortNetwork INTEGER, g3filterBoardNumber DisplayString, g3filterPort DisplayString, g3filterCategory DisplayString, g3filterMaintenanceObject DisplayString, g3filterExtension DisplayString, g3filterTrunkGroup INTEGER, g3filterTrunkMember INTEGER, g3filterErrorCode DisplayString, g3filterTableIndex INTEGER } g3filterDestination OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trap destination IP address." ::= { g3filterEntry 1 } g3filterFilterNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the filter number for the specified trap destination IP address." ::= { g3filterEntry 2 } g3filterApplicationID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the application ID that administered the alarm filter." ::= { g3filterEntry 3 } g3filterActive OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not active alarms are to have traps generated." ::= { g3filterEntry 4 } g3filterResolved OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not resolved alarms are to have traps generated." ::= { g3filterEntry 5 } g3filterMajor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not major alarms are to have traps generated." ::= { g3filterEntry 6 } g3filterMinor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not minor alarms are to have traps generated." ::= { g3filterEntry 7 } g3filterWarning OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not warning alarms are to have traps generated." ::= { g3filterEntry 8 } g3filterMediaGateway OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the media gateway number (1-250) for alarms to be trapped." ::= { g3filterEntry 9 } g3filterCabinet OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the cabinet number (1-64) for alarms to be trapped." ::= { g3filterEntry 10 } g3filterPortNetwork OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the port network number (1-64) for alarms to be trapped." ::= { g3filterEntry 11 } g3filterBoardNumber OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the board location for alarms are to be trapped." ::= { g3filterEntry 12 } g3filterPort OBJECT-TYPE SYNTAX DisplayString (SIZE (0..14)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the port location for alarms are to be trapped." ::= { g3filterEntry 13 } g3filterCategory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the alarm category for alarms are to be trapped." ::= { g3filterEntry 14 } g3filterMaintenanceObject OBJECT-TYPE SYNTAX DisplayString (SIZE (0..20)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the maintenance object name for alarms are to be trapped." ::= { g3filterEntry 15 } g3filterExtension OBJECT-TYPE SYNTAX DisplayString (SIZE (0..15)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the extension number for alarms are to be trapped." ::= { g3filterEntry 16 } g3filterTrunkGroup OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the trunk group number for alarms are to be trapped (1-2000)." ::= { g3filterEntry 17 } g3filterTrunkMember OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the trunk member with a given trunk group for alarms are to be trapped (1-255)." ::= { g3filterEntry 18 } g3filterErrorCode OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the error code for alarms are to be trapped." ::= { g3filterEntry 19 } g3filterTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the filter entry." ::= { g3filterEntry 20 } g3filterApplication OBJECT-TYPE SYNTAX INTEGER { fpm(1), -- Fault and Performance Manager cm-web(2), -- CM Maintenance Web Interface avaya-3(3), -- Avaya Reserved ID avaya-4(4), -- Avaya Reserved ID avaya-5(5), -- Avaya Reserved ID avaya-6(6), -- Avaya Reserved ID avaya-7(7), -- Avaya Reserved ID avaya-8(8), -- Avaya Reserved ID avaya-9(9), -- Avaya Reserved ID avaya-10(10), -- Avaya Reserved ID avaya-11(11), -- Avaya Reserved ID avaya-12(12), -- Avaya Reserved ID avaya-13(13), -- Avaya Reserved ID avaya-14(14), -- Avaya Reserved ID avaya-15(15), -- Avaya Reserved ID avaya-16(16), -- Avaya Reserved ID avaya-17(17), -- Avaya Reserved ID avaya-18(18), -- Avaya Reserved ID avaya-19(19), -- Avaya Reserved ID avaya-20(20), -- Avaya Reserved ID avaya-21(21), -- Avaya Reserved ID avaya-22(22), -- Avaya Reserved ID avaya-23(23), -- Avaya Reserved ID avaya-24(24), -- Avaya Reserved ID avaya-25(25), -- Avaya Reserved ID avaya-26(26), -- Avaya Reserved ID avaya-27(27), -- Avaya Reserved ID avaya-28(28), -- Avaya Reserved ID avaya-29(29), -- Avaya Reserved ID avaya-30(30), -- Avaya Reserved ID avaya-31(31), -- Avaya Reserved ID avaya-32(32), -- Avaya Reserved ID avaya-33(33), -- Avaya Reserved ID avaya-34(34), -- Avaya Reserved ID avaya-35(35), -- Avaya Reserved ID avaya-36(36), -- Avaya Reserved ID avaya-37(37), -- Avaya Reserved ID avaya-38(38), -- Avaya Reserved ID avaya-39(39), -- Avaya Reserved ID avaya-40(40), -- Avaya Reserved ID avaya-41(41), -- Avaya Reserved ID avaya-42(42), -- Avaya Reserved ID avaya-43(43), -- Avaya Reserved ID avaya-44(44), -- Avaya Reserved ID avaya-45(45), -- Avaya Reserved ID avaya-46(46), -- Avaya Reserved ID avaya-47(47), -- Avaya Reserved ID avaya-48(48), -- Avaya Reserved ID avaya-49(49), -- Avaya Reserved ID avaya-50(50), -- Avaya Reserved ID customer-51(51), -- Customer Reserved ID customer-52(52), -- Customer Reserved ID customer-53(53), -- Customer Reserved ID customer-54(54), -- Customer Reserved ID customer-55(55), -- Customer Reserved ID customer-56(56), -- Customer Reserved ID customer-57(57), -- Customer Reserved ID customer-58(58), -- Customer Reserved ID customer-59(59), -- Customer Reserved ID customer-60(60), -- Customer Reserved ID customer-61(61), -- Customer Reserved ID customer-62(62), -- Customer Reserved ID customer-63(63), -- Customer Reserved ID customer-64(64), -- Customer Reserved ID customer-65(65), -- Customer Reserved ID customer-66(66), -- Customer Reserved ID customer-67(67), -- Customer Reserved ID customer-68(68), -- Customer Reserved ID customer-69(69), -- Customer Reserved ID customer-70(70), -- Customer Reserved ID customer-71(71), -- Customer Reserved ID customer-72(72), -- Customer Reserved ID customer-73(73), -- Customer Reserved ID customer-74(74), -- Customer Reserved ID customer-75(75), -- Customer Reserved ID customer-76(76), -- Customer Reserved ID customer-77(77), -- Customer Reserved ID customer-78(78), -- Customer Reserved ID customer-79(79), -- Customer Reserved ID customer-80(80), -- Customer Reserved ID customer-81(81), -- Customer Reserved ID customer-82(82), -- Customer Reserved ID customer-83(83), -- Customer Reserved ID customer-84(84), -- Customer Reserved ID customer-85(85), -- Customer Reserved ID customer-86(86), -- Customer Reserved ID customer-87(87), -- Customer Reserved ID customer-88(88), -- Customer Reserved ID customer-89(89), -- Customer Reserved ID customer-90(90), -- Customer Reserved ID customer-91(91), -- Customer Reserved ID customer-92(92), -- Customer Reserved ID customer-93(93), -- Customer Reserved ID customer-94(94), -- Customer Reserved ID customer-95(95), -- Customer Reserved ID customer-96(96), -- Customer Reserved ID customer-97(97), -- Customer Reserved ID customer-98(98), -- Customer Reserved ID customer-99(99), -- Customer Reserved ID customer-100(100) -- Customer Reserved ID } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object containing an ID specifying from which application filtering was administered. This field can take on values of 1-100. IDs 1-50 are reserved for Avaya applications. IDs 51-100 can be customer-defined to allow a customer to identify the user or application that set up the filter. Use of an application ID reserved for Avaya, when the filter is being administered from a non-Avaya application, may cause handling of that alarm filter to operate incorrectly. This field is only used in combination with the g3filterFilterStatus field for setting the filter status (see description of that field for more details). On an SNMP get request, the value of this field will always be reported as '0'." ::= { g3filter 3 } g3filterTrapTest OBJECT-TYPE SYNTAX INTEGER { enable(1), -- enable test trap generation disable(2) -- disable test trap generation } ACCESS read-write STATUS mandatory DESCRIPTION "An INTEGER object specifying whether test trap generation is enabled or disabled. This field can be set to 1 to enable test trap generation.By default it is set to 2 disabled." ::= { g3filter 4 } -- the g3maintobj group g3maintobjTable OBJECT-TYPE SYNTAX SEQUENCE OF G3maintobjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3maintobj entries." ::= { g3maintobj 1 } g3maintobjEntry OBJECT-TYPE SYNTAX G3maintobjEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3maintobj entry containing a CM maintenance object string." INDEX { g3maintobjTableIndex } ::= { g3maintobjTable 1 } G3maintobjEntry ::= SEQUENCE { g3maintobjMOname DisplayString, g3maintobjTableIndex INTEGER } g3maintobjMOname OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a CM maintenance object string." ::= { g3maintobjEntry 1 } g3maintobjTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the maintenance object entry." ::= { g3maintobjEntry 2 } -- the g3category group g3categoryTable OBJECT-TYPE SYNTAX SEQUENCE OF G3categoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3category entries." ::= { g3category 1 } g3categoryEntry OBJECT-TYPE SYNTAX G3categoryEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3category entry containing a CM alarm category and list of maintenance objects associated with the category." INDEX { g3categoryTableIndex } ::= { g3categoryTable 1 } G3categoryEntry ::= SEQUENCE { g3categoryCategory DisplayString, g3categoryMOName DisplayString, g3categoryTableIndex INTEGER } g3categoryCategory OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a CM alarm category string." ::= { g3categoryEntry 1 } g3categoryMOName OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a CM maintenance object name." ::= { g3categoryEntry 2 } g3categoryTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the category entry." ::= { g3categoryEntry 3 } -- the g3platsrc group g3platsrcTable OBJECT-TYPE SYNTAX SEQUENCE OF G3platsrcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3platsrc entries." ::= { g3platsrc 1 } g3platsrcEntry OBJECT-TYPE SYNTAX G3platsrcEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3platsrc entry containing a platform alarm source." INDEX { g3platsrcTableIndex } ::= { g3platsrcTable 1 } G3platsrcEntry ::= SEQUENCE { g3platsrcSource DisplayString, g3platsrcTableIndex INTEGER } g3platsrcSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing a platform alarm source string." ::= { g3platsrcEntry 1 } g3platsrcTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the alarm source entry." ::= { g3platsrcEntry 2 } -- the g3platfilt group g3platfiltTable OBJECT-TYPE SYNTAX SEQUENCE OF G3platfiltEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3platfilt entries." ::= { g3platfilt 1 } g3platfiltEntry OBJECT-TYPE SYNTAX G3platfiltEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3platfilt entry containing objects of the active filter information for platform alarms stored in the SNMP agent." INDEX { g3platfiltDestination, g3platfiltFilterNumber } ::= { g3platfiltTable 1 } G3platfiltEntry ::= SEQUENCE { g3platfiltDestination DisplayString, g3platfiltFilterNumber INTEGER, g3platfiltApplicationID INTEGER, g3platfiltActive INTEGER, g3platfiltResolved INTEGER, g3platfiltMajor INTEGER, g3platfiltMinor INTEGER, g3platfiltWarning INTEGER, g3platfiltAlarmType DisplayString, g3platfiltAlarmSource DisplayString, g3platfiltEventID DisplayString, g3platfiltTableIndex INTEGER } g3platfiltDestination OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trap destination IP address." ::= { g3platfiltEntry 1 } g3platfiltFilterNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the platfilt number for the specified trap destination IP address." ::= { g3platfiltEntry 2 } g3platfiltApplicationID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the application ID that administered the alarm filter." ::= { g3platfiltEntry 3 } g3platfiltActive OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not active alarms are to have traps generated." ::= { g3platfiltEntry 4 } g3platfiltResolved OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not resolved alarms are to have traps generated." ::= { g3platfiltEntry 5 } g3platfiltMajor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not major alarms are to have traps generated." ::= { g3platfiltEntry 6 } g3platfiltMinor OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not minor alarms are to have traps generated." ::= { g3platfiltEntry 7 } g3platfiltWarning OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not warning alarms are to have traps generated." ::= { g3platfiltEntry 8 } g3platfiltAlarmType OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates the alarm type for alarms to be trapped. The allowed values are 'A' for application alarms, '*' for security alarms, 'S' for system alarms, or 'M' for system management alarms." ::= { g3platfiltEntry 9 } g3platfiltAlarmSource OBJECT-TYPE SYNTAX DisplayString (SIZE (0..25)) ACCESS read-only STATUS mandatory DESCRIPTION "This field contains a string indicating the alarm source to be trapped. The possible values are defined in CM alarm maintenance rules." ::= { g3platfiltEntry 10 } g3platfiltEventID OBJECT-TYPE SYNTAX DisplayString (SIZE (0..10)) ACCESS read-only STATUS mandatory DESCRIPTION "This field contains an event ID associated with a specific alarm source to be trapped. Possible event ID values are documented in CM maintenance documentation." ::= { g3platfiltEntry 11 } g3platfiltTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the filter entry." ::= { g3platfiltEntry 12 } -- the g3rstfilt group g3rstfiltTable OBJECT-TYPE SYNTAX SEQUENCE OF G3rstfiltEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A list of g3rstfilt entries." ::= { g3rstfilt 1 } g3rstfiltEntry OBJECT-TYPE SYNTAX G3rstfiltEntry ACCESS not-accessible STATUS mandatory DESCRIPTION "A g3rstfilt entry containing objects of the active filter information for system restart notifications stored in the SNMP agent." INDEX { g3rstfiltDestination, g3rstfiltFilterNumber } ::= { g3rstfiltTable 1 } G3rstfiltEntry ::= SEQUENCE { g3rstfiltDestination DisplayString, g3rstfiltFilterNumber INTEGER, g3rstfiltApplicationID INTEGER, g3rstfiltWarmRestart INTEGER, g3rstfiltCold2Restart INTEGER, g3rstfiltCold1Restart INTEGER, g3rstfiltReboot INTEGER, g3rstfiltXReboot INTEGER, g3rstfiltHotPeiRestart INTEGER, g3rstfiltInterchange DisplayString, g3rstfiltCraftInitiated DisplayString, g3rstfiltTableIndex INTEGER } g3rstfiltDestination OBJECT-TYPE SYNTAX DisplayString (SIZE (0..256)) ACCESS read-only STATUS mandatory DESCRIPTION "A DisplayString Object containing the trap destination IP address." ::= { g3rstfiltEntry 1 } g3rstfiltFilterNumber OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the rstfilt number for the specified trap destination IP address." ::= { g3rstfiltEntry 2 } g3rstfiltApplicationID OBJECT-TYPE SYNTAX INTEGER ACCESS read-only STATUS mandatory DESCRIPTION "An INTEGER object containing the application ID that administered the alarm filter." ::= { g3rstfiltEntry 3 } g3rstfiltWarmRestart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not WARM restarts are to have traps generated." ::= { g3rstfiltEntry 4 } g3rstfiltCold2Restart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not COLD2 restarts are to have traps generated." ::= { g3rstfiltEntry 5 } g3rstfiltCold1Restart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not COLD1 restarts are to have traps generated." ::= { g3rstfiltEntry 6 } g3rstfiltReboot OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not REBOOT restarts are to have traps generated." ::= { g3rstfiltEntry 7 } g3rstfiltXReboot OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not XREBOOT restarts are to have traps generated." ::= { g3rstfiltEntry 8 } g3rstfiltHotPeiRestart OBJECT-TYPE SYNTAX INTEGER { yes(1), no(2) } ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not HOTPEI restarts are to have traps generated." ::= { g3rstfiltEntry 9 } g3rstfiltInterchange OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or not restarts involving a interchange are to have traps generated. A value of 'y' indicates that only restarts involving an interchange are trapped. A value of 'n' indicates that only restarts not involving an interchange are trapped. A value of '-' indicates that a trap is generated whether an interchange occurred or not." ::= { g3rstfiltEntry 10 } g3rstfiltCraftInitiated OBJECT-TYPE SYNTAX DisplayString (SIZE (0..5)) ACCESS read-only STATUS mandatory DESCRIPTION "This field indicates whether or restarts that are craft initiated are to have traps generated. A value of 'y' indicates that a trap would be generated only if the restart was craft initiated. A value of 'n' indicates that a trap would be generated only if the restart was not craft initiated. A value of '-' indicates that a trap is generated whether the restart was craft initiated or not." ::= { g3rstfiltEntry 11 } g3rstfiltTableIndex OBJECT-TYPE SYNTAX INTEGER ACCESS not-accessible STATUS mandatory DESCRIPTION "An INTEGER object containing an index numbering the filter entry." ::= { g3rstfiltEntry 12 } END -- The following is the definition of the Traps issued by the -- DEFINITY(r) G3 Proxy Agent. These traps are defined using the -- TRAP-TYPE macro defined in RFC1215. G3-AVAYA-TRAP DEFINITIONS ::= BEGIN IMPORTS g3-products, g3alarmsPort, g3alarmsMaintName, g3alarmsOnBrd, g3alarmsAlarmType, g3extdevAltName, g3extdevDescription, g3extdevID, g3extdevBuilding, g3extdevAddress, g3clientExternalName, g3alarmsAlarmNumber, g3alarmsProductID, g3restartDateTime, g3restartLevel, g3restartCarrier, g3restartCraftDemand, g3restartEscalated, g3restartInterchange, g3restartUnavailable, g3restartCause, g3vintageSpeArelease, g3vintageSpeBrelease, g3vintageSpeAupID, g3vintageSpeBupID, g3alarmsIPAddress, g3alarmsCategory, g3alarmsErrorCodes, g3alarmsSrcIPAddr, g3alarmsSrcMACAddr, g3alarmsDestIPAddr, g3alarmsDestPort, g3alarmsProtocol, g3alarmsCount, g3alarmsViolationType, g3alarmsCode, g3alarmsData, g3alarmsICMPType, g3alarmsEventID, g3alarmsStatus FROM G3-AVAYA-MIB sysName FROM RFC1213-MIB TRAP-TYPE FROM RFC-1215; alarmClear TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber } DESCRIPTION "A Cleared Alarm Notification has been issued by the switch indicating that all alarms have been cleared." ::= 0 alarmCritical TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "This trap is defined for future use." ::= 1 alarmMajor TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "A Major alarm has been issued by the switch. The MIB variables provide attributes of the alarm. The information contained in the g3alarmsPort, g3alarmsMaintName, g3alarmsOnBrd trap variables differ depending on the kind of alarm. If the alarm is a voice server alarm these fields contain, respectively, an equipment location, maintenance object name, and flag indicating whether or not the alarm was on-board. For server platform alarms and messaging alarms these fields contain, respectively, an alarm description including the source of the alarm, a string indicating the resource from which the alarm was generated, and an event ID associated with that resource. More details on the contents of these fields can be found in the appropriate product maintenance documentation." ::= 2 alarmMinor TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "A Minor alarm has been issued by the switch. The fields in this trap type has the same differences, for g3alarmsPort, g3alarmsMaintName, and g3alarmsOnBrd, as described above for the alarmMajor trap type." ::= 3 alarmWarning TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "A Warning alarm has been issued by the switch. The fields in this trap type has the same differences, for g3alarmsPort, g3alarmsMaintName, and g3alarmsOnBrd, as described above for the alarmMajor trap type." ::= 4 alarmResolved TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "An alarm has been resolved on the switch. The fields in this trap type has the same differences, for g3alarmsPort, g3alarmsMaintName, and g3alarmsOnBrd, as described above for the alarmMajor trap type." ::= 12 alarmRMS TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsAlarmType,g3alarmsCategory,g3alarmsSrcIPAddr,g3alarmsSrcMACAddr,g3alarmsDestIPAddr,g3alarmsDestPort,g3alarmsProtocol,g3alarmsCount,g3alarmsViolationType,g3alarmsCode,g3alarmsData,g3alarmsICMPType,g3alarmsEventID,g3alarmsStatus } DESCRIPTION "An alarm associated with security related events has been issued by the server." ::= 13 extalarmMajor TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3extdevAltName,g3extdevDescription,g3extdevID,g3extdevBuilding,g3extdevAddress,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "An external device Major alarm has been issued by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voice server alarms." ::= 5 extalarmMinor TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3extdevAltName,g3extdevDescription,g3extdevID,g3extdevBuilding,g3extdevAddress,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "An external device Minor alarm has been issued by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voice server alarms." ::= 6 extalarmWarning TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3extdevAltName,g3extdevDescription,g3extdevID,g3extdevBuilding,g3extdevAddress,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "An external device Warning alarm has been issued by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voice server alarms." ::= 14 extalarmResolved TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3alarmsPort,g3alarmsMaintName,g3alarmsOnBrd,g3alarmsAlarmType,g3extdevAltName,g3extdevDescription,g3extdevID,g3extdevBuilding,g3extdevAddress,g3alarmsIPAddress,g3alarmsCategory,g3alarmsErrorCodes } DESCRIPTION "An external device alarm has been resolved by the switch. The variables describe the location and nature of the alarm. This trap type only applies to voice server alarms." ::= 15 alarmDispatch TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber } DESCRIPTION "INADS has dispatched the alarm." ::= 7 alarmClose TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber } DESCRIPTION "INADS has closed the alarm." ::= 8 alarmRestart TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber,g3restartDateTime,g3restartLevel,g3restartCarrier,g3restartCraftDemand,g3restartEscalated,g3restartInterchange,g3restartUnavailable, g3restartCause, g3vintageSpeArelease, g3vintageSpeBrelease, g3vintageSpeAupID, g3vintageSpeBupID} DESCRIPTION "A system restart has occurred on the switch. The variables describe the location and nature of the restart." ::= 9 alarmNak TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber } DESCRIPTION "A NAK was received in an attempt to forward the alarm to INADS." ::= 10 alarmNoAck TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName,g3alarmsProductID,g3alarmsAlarmNumber } DESCRIPTION "A response other than an ACK or NAK was received in an attempt to forward the alarm to INADS." ::= 11 connectOther TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName } DESCRIPTION "The connection status of the PBX/ECS has changed to OTHER. This status indicates that the connect is in an unknown state." ::= 101 connectOff TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName } DESCRIPTION "The connection status of the PBX/ECS has changed to OFF. This status indicates that user set the connection state to off so that the Proxy Agent will not start up a connection with the PBX/ECS." ::= 102 connectDown TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName } DESCRIPTION "The connection status of the PBX/ECS has changed to DOWN. This status indicates that the Proxy Agent attempted to establish a connection with the PBX/ECS and failed." ::= 103 connectInit TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName } DESCRIPTION "The connection status of the PBX/ECS has changed to INIT. This status indicates that the Proxy Agent is in the process of attempting to connect to the PBX/ECS." ::= 104 connectUp TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName } DESCRIPTION "The connection status of the PBX/ECS has changed to UP. This status indicates that the Proxy Agent has a connection established with the PBX/ECS." ::= 105 connectIdle TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName } DESCRIPTION "The connection status of the PBX/ECS has changed to IDLE. This status indicates that a connection with the PBX/ECS is currently inactive due to the dynamic timeout having been reached without any activity. The connection will stay in the IDLE state until an SNMP request or alarm is received. This connection status only applies if the connection type is 'dynamic'." ::= 106 connectMax TRAP-TYPE ENTERPRISE g3-products VARIABLES { g3clientExternalName } DESCRIPTION "The connection to a PBX/ECS could not be established due to the maximum allowed number of simultaneous connections already being active." ::= 110 proxyDown TRAP-TYPE ENTERPRISE g3-products VARIABLES { sysName } DESCRIPTION "The user has issued a stop proxy-agent command to bring down the Proxy Agent." ::= 150 proxyUp TRAP-TYPE ENTERPRISE g3-products VARIABLES { sysName } DESCRIPTION "The user has issued a start proxy-agent command to bring up the Proxy Agent." ::= 151 END